From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL 6/7] target-i386: Fix inhibit irq mask handling
Date: Sat, 12 Mar 2016 18:17:08 -0800 [thread overview]
Message-ID: <1457835429-17843-7-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1457835429-17843-1-git-send-email-rth@twiddle.net>
The patch in 7f0b714 was too simplistic, in that we wound up setting
the flag and then resetting it immediately in gen_eob.
Fixes the reported boot problem with Windows XP.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
target-i386/translate.c | 76 ++++++++++++++++++++++++-------------------------
1 file changed, 37 insertions(+), 39 deletions(-)
diff --git a/target-i386/translate.c b/target-i386/translate.c
index 2631c77..92cb1c8 100644
--- a/target-i386/translate.c
+++ b/target-i386/translate.c
@@ -2425,12 +2425,19 @@ static void gen_bnd_jmp(DisasContext *s)
}
}
-/* generate a generic end of block. Trace exception is also generated
- if needed */
-static void gen_eob(DisasContext *s)
+/* Generate an end of block. Trace exception is also generated if needed.
+ If IIM, set HF_INHIBIT_IRQ_MASK if it isn't already set. */
+static void gen_eob_inhibit_irq(DisasContext *s, bool inhibit)
{
gen_update_cc_op(s);
- gen_reset_hflag(s, HF_INHIBIT_IRQ_MASK);
+
+ /* If several instructions disable interrupts, only the first does it. */
+ if (inhibit && !(s->flags & HF_INHIBIT_IRQ_MASK)) {
+ gen_set_hflag(s, HF_INHIBIT_IRQ_MASK);
+ } else {
+ gen_reset_hflag(s, HF_INHIBIT_IRQ_MASK);
+ }
+
if (s->tb->flags & HF_RF_MASK) {
gen_helper_reset_rf(cpu_env);
}
@@ -2444,6 +2451,12 @@ static void gen_eob(DisasContext *s)
s->is_jmp = DISAS_TB_JUMP;
}
+/* End of block, resetting the inhibit irq flag. */
+static void gen_eob(DisasContext *s)
+{
+ gen_eob_inhibit_irq(s, false);
+}
+
/* generate a jump to eip. No segment change must happen before as a
direct call to the next block may occur */
static void gen_jmp_tb(DisasContext *s, target_ulong eip, int tb_num)
@@ -5177,16 +5190,15 @@ static target_ulong disas_insn(CPUX86State *env, DisasContext *s,
ot = gen_pop_T0(s);
gen_movl_seg_T0(s, reg);
gen_pop_update(s, ot);
- if (reg == R_SS) {
- /* if reg == SS, inhibit interrupts/trace. */
- /* If several instructions disable interrupts, only the
- _first_ does it */
- gen_set_hflag(s, HF_INHIBIT_IRQ_MASK);
- s->tf = 0;
- }
+ /* Note that reg == R_SS in gen_movl_seg_T0 always sets is_jmp. */
if (s->is_jmp) {
gen_jmp_im(s->pc - s->cs_base);
- gen_eob(s);
+ if (reg == R_SS) {
+ s->tf = 0;
+ gen_eob_inhibit_irq(s, true);
+ } else {
+ gen_eob(s);
+ }
}
break;
case 0x1a1: /* pop fs */
@@ -5244,16 +5256,15 @@ static target_ulong disas_insn(CPUX86State *env, DisasContext *s,
goto illegal_op;
gen_ldst_modrm(env, s, modrm, MO_16, OR_TMP0, 0);
gen_movl_seg_T0(s, reg);
- if (reg == R_SS) {
- /* if reg == SS, inhibit interrupts/trace */
- /* If several instructions disable interrupts, only the
- _first_ does it */
- gen_set_hflag(s, HF_INHIBIT_IRQ_MASK);
- s->tf = 0;
- }
+ /* Note that reg == R_SS in gen_movl_seg_T0 always sets is_jmp. */
if (s->is_jmp) {
gen_jmp_im(s->pc - s->cs_base);
- gen_eob(s);
+ if (reg == R_SS) {
+ s->tf = 0;
+ gen_eob_inhibit_irq(s, true);
+ } else {
+ gen_eob(s);
+ }
}
break;
case 0x8c: /* mov Gv, seg */
@@ -6779,26 +6790,13 @@ static target_ulong disas_insn(CPUX86State *env, DisasContext *s,
}
break;
case 0xfb: /* sti */
- if (!s->vm86) {
- if (s->cpl <= s->iopl) {
- gen_sti:
- gen_helper_sti(cpu_env);
- /* interruptions are enabled only the first insn after sti */
- /* If several instructions disable interrupts, only the
- _first_ does it */
- gen_set_hflag(s, HF_INHIBIT_IRQ_MASK);
- /* give a chance to handle pending irqs */
- gen_jmp_im(s->pc - s->cs_base);
- gen_eob(s);
- } else {
- gen_exception(s, EXCP0D_GPF, pc_start - s->cs_base);
- }
+ if (s->vm86 ? s->iopl == 3 : s->cpl <= s->iopl) {
+ gen_helper_sti(cpu_env);
+ /* interruptions are enabled only the first insn after sti */
+ gen_jmp_im(s->pc - s->cs_base);
+ gen_eob_inhibit_irq(s, true);
} else {
- if (s->iopl == 3) {
- goto gen_sti;
- } else {
- gen_exception(s, EXCP0D_GPF, pc_start - s->cs_base);
- }
+ gen_exception(s, EXCP0D_GPF, pc_start - s->cs_base);
}
break;
case 0x62: /* bound */
--
2.5.0
next prev parent reply other threads:[~2016-03-13 2:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-13 2:17 [Qemu-devel] [PULL 0/7] target-i386 fixes Richard Henderson
2016-03-13 2:17 ` [Qemu-devel] [PULL 1/7] target-i386: Avoid repeated calls to the bnd_jmp helper Richard Henderson
2016-03-13 2:17 ` [Qemu-devel] [PULL 2/7] target-i386: Fix SMSW and LMSW from/to register Richard Henderson
2016-03-13 2:17 ` [Qemu-devel] [PULL 3/7] target-i386: Fix SMSW for 64-bit mode Richard Henderson
2016-03-13 2:17 ` [Qemu-devel] [PULL 4/7] target-i386: Fix addr16 prefix Richard Henderson
2016-03-13 2:17 ` [Qemu-devel] [PULL 5/7] target-i386: Use gen_nop_modrm for prefetch instructions Richard Henderson
2016-03-13 2:17 ` Richard Henderson [this message]
2016-03-13 2:17 ` [Qemu-devel] [PULL 7/7] target-i386: Dump unknown opcodes with -d unimp Richard Henderson
2016-03-14 16:57 ` [Qemu-devel] [PULL 0/7] target-i386 fixes Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457835429-17843-7-git-send-email-rth@twiddle.net \
--to=rth@twiddle.net \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).