qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Huth <thuth@redhat.com>
To: qemu-devel@nongnu.org, David Gibson <david@gibson.dropbear.id.au>,
	Alexander Graf <agraf@suse.de>
Cc: lvivier@redhat.com, Alexey Kardashevskiy <aik@ozlabs.ru>,
	Jason Wang <jasowang@redhat.com>,
	qemu-ppc@nongnu.org, Anton Blanchard <anton@samba.org>
Subject: [Qemu-devel] [PATCH 1/3] hw/net/spapr_llan: Extract rx buffer code into separate functions
Date: Wed, 16 Mar 2016 13:16:49 +0100	[thread overview]
Message-ID: <1458130611-17304-2-git-send-email-thuth@redhat.com> (raw)
In-Reply-To: <1458130611-17304-1-git-send-email-thuth@redhat.com>

Refactor the code a little bit by extracting the code that reads
and writes the receive buffer list page into separate functions.
There should be no functional change in this patch, this is just
a preparation for the upcoming extensions that introduce receive
buffer pools.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 hw/net/spapr_llan.c | 106 ++++++++++++++++++++++++++++++++++------------------
 1 file changed, 70 insertions(+), 36 deletions(-)

diff --git a/hw/net/spapr_llan.c b/hw/net/spapr_llan.c
index 5237b4d..39a1dd1 100644
--- a/hw/net/spapr_llan.c
+++ b/hw/net/spapr_llan.c
@@ -103,6 +103,42 @@ static int spapr_vlan_can_receive(NetClientState *nc)
     return (dev->isopen && dev->rx_bufs > 0);
 }
 
+/**
+ * Get buffer descriptor from the receive buffer list page that has been
+ * supplied by the guest with the H_REGISTER_LOGICAL_LAN call
+ */
+static vlan_bd_t spapr_vlan_get_rx_bd_from_page(VIOsPAPRVLANDevice *dev,
+                                                size_t size)
+{
+    int buf_ptr = dev->use_buf_ptr;
+    vlan_bd_t bd;
+
+    do {
+        buf_ptr += 8;
+        if (buf_ptr >= VLAN_RX_BDS_LEN + VLAN_RX_BDS_OFF) {
+            buf_ptr = VLAN_RX_BDS_OFF;
+        }
+
+        bd = vio_ldq(&dev->sdev, dev->buf_list + buf_ptr);
+        DPRINTF("use_buf_ptr=%d bd=0x%016llx\n",
+                buf_ptr, (unsigned long long)bd);
+    } while ((!(bd & VLAN_BD_VALID) || VLAN_BD_LEN(bd) < size + 8)
+             && buf_ptr != dev->use_buf_ptr);
+
+    if (!(bd & VLAN_BD_VALID) || VLAN_BD_LEN(bd) < size + 8) {
+        /* Failed to find a suitable buffer */
+        return 0;
+    }
+
+    /* Remove the buffer from the pool */
+    dev->use_buf_ptr = buf_ptr;
+    vio_stq(&dev->sdev, dev->buf_list + dev->use_buf_ptr, 0);
+
+    DPRINTF("Found buffer: ptr=%d rxbufs=%d\n", dev->use_buf_ptr, dev->rx_bufs);
+
+    return bd;
+}
+
 static ssize_t spapr_vlan_receive(NetClientState *nc, const uint8_t *buf,
                                   size_t size)
 {
@@ -110,7 +146,6 @@ static ssize_t spapr_vlan_receive(NetClientState *nc, const uint8_t *buf,
     VIOsPAPRDevice *sdev = VIO_SPAPR_DEVICE(dev);
     vlan_bd_t rxq_bd = vio_ldq(sdev, dev->buf_list + VLAN_RXQ_BD_OFF);
     vlan_bd_t bd;
-    int buf_ptr = dev->use_buf_ptr;
     uint64_t handle;
     uint8_t control;
 
@@ -125,29 +160,12 @@ static ssize_t spapr_vlan_receive(NetClientState *nc, const uint8_t *buf,
         return -1;
     }
 
-    do {
-        buf_ptr += 8;
-        if (buf_ptr >= (VLAN_RX_BDS_LEN + VLAN_RX_BDS_OFF)) {
-            buf_ptr = VLAN_RX_BDS_OFF;
-        }
-
-        bd = vio_ldq(sdev, dev->buf_list + buf_ptr);
-        DPRINTF("use_buf_ptr=%d bd=0x%016llx\n",
-                buf_ptr, (unsigned long long)bd);
-    } while ((!(bd & VLAN_BD_VALID) || (VLAN_BD_LEN(bd) < (size + 8)))
-             && (buf_ptr != dev->use_buf_ptr));
-
-    if (!(bd & VLAN_BD_VALID) || (VLAN_BD_LEN(bd) < (size + 8))) {
-        /* Failed to find a suitable buffer */
+    bd = spapr_vlan_get_rx_bd_from_page(dev, size);
+    if (!bd) {
         return -1;
     }
 
-    /* Remove the buffer from the pool */
     dev->rx_bufs--;
-    dev->use_buf_ptr = buf_ptr;
-    vio_stq(sdev, dev->buf_list + dev->use_buf_ptr, 0);
-
-    DPRINTF("Found buffer: ptr=%d num=%d\n", dev->use_buf_ptr, dev->rx_bufs);
 
     /* Transfer the packet data */
     if (spapr_vio_dma_write(sdev, VLAN_BD_ADDR(bd) + 8, buf, size) < 0) {
@@ -372,6 +390,32 @@ static target_ulong h_free_logical_lan(PowerPCCPU *cpu,
     return H_SUCCESS;
 }
 
+static target_long spapr_vlan_add_rxbuf_to_page(VIOsPAPRVLANDevice *dev,
+                                                target_ulong buf)
+{
+    vlan_bd_t bd;
+
+    if (dev->rx_bufs >= VLAN_MAX_BUFS) {
+        return H_RESOURCE;
+    }
+
+    do {
+        dev->add_buf_ptr += 8;
+        if (dev->add_buf_ptr >= VLAN_RX_BDS_LEN + VLAN_RX_BDS_OFF) {
+            dev->add_buf_ptr = VLAN_RX_BDS_OFF;
+        }
+
+        bd = vio_ldq(&dev->sdev, dev->buf_list + dev->add_buf_ptr);
+    } while (bd & VLAN_BD_VALID);
+
+    vio_stq(&dev->sdev, dev->buf_list + dev->add_buf_ptr, buf);
+
+    DPRINTF("h_add_llan_buf():  Added buf  ptr=%d  rx_bufs=%d bd=0x%016llx\n",
+            dev->add_buf_ptr, dev->rx_bufs, (unsigned long long)buf);
+
+    return 0;
+}
+
 static target_ulong h_add_logical_lan_buffer(PowerPCCPU *cpu,
                                              sPAPRMachineState *spapr,
                                              target_ulong opcode,
@@ -381,7 +425,7 @@ static target_ulong h_add_logical_lan_buffer(PowerPCCPU *cpu,
     target_ulong buf = args[1];
     VIOsPAPRDevice *sdev = spapr_vio_find_by_reg(spapr->vio_bus, reg);
     VIOsPAPRVLANDevice *dev = VIO_SPAPR_VLAN_DEVICE(sdev);
-    vlan_bd_t bd;
+    target_long ret;
 
     DPRINTF("H_ADD_LOGICAL_LAN_BUFFER(0x" TARGET_FMT_lx
             ", 0x" TARGET_FMT_lx ")\n", reg, buf);
@@ -397,29 +441,19 @@ static target_ulong h_add_logical_lan_buffer(PowerPCCPU *cpu,
         return H_PARAMETER;
     }
 
-    if (!dev->isopen || dev->rx_bufs >= VLAN_MAX_BUFS) {
+    if (!dev->isopen) {
         return H_RESOURCE;
     }
 
-    do {
-        dev->add_buf_ptr += 8;
-        if (dev->add_buf_ptr >= (VLAN_RX_BDS_LEN + VLAN_RX_BDS_OFF)) {
-            dev->add_buf_ptr = VLAN_RX_BDS_OFF;
-        }
-
-        bd = vio_ldq(sdev, dev->buf_list + dev->add_buf_ptr);
-    } while (bd & VLAN_BD_VALID);
-
-    vio_stq(sdev, dev->buf_list + dev->add_buf_ptr, buf);
+    ret = spapr_vlan_add_rxbuf_to_page(dev, buf);
+    if (ret) {
+        return ret;
+    }
 
     dev->rx_bufs++;
 
     qemu_flush_queued_packets(qemu_get_queue(dev->nic));
 
-    DPRINTF("h_add_logical_lan_buffer():  Added buf  ptr=%d  rx_bufs=%d"
-            " bd=0x%016llx\n", dev->add_buf_ptr, dev->rx_bufs,
-            (unsigned long long)buf);
-
     return H_SUCCESS;
 }
 
-- 
1.8.3.1

  reply	other threads:[~2016-03-16 12:38 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-16 12:16 [Qemu-devel] [PATCH 0/3] hw/net/spapr_llan: Fix bad RX performance of the spapr-vlan device Thomas Huth
2016-03-16 12:16 ` Thomas Huth [this message]
2016-03-17  6:23   ` [Qemu-devel] [PATCH 1/3] hw/net/spapr_llan: Extract rx buffer code into separate functions David Gibson
2016-03-18 11:53   ` Laurent Vivier
2016-03-16 12:16 ` [Qemu-devel] [PATCH 2/3] hw/net/spapr_llan: Fix receive buffer handling for better performance Thomas Huth
2016-03-17  6:23   ` David Gibson
2016-03-17  7:30     ` Thomas Huth
2016-03-17 10:00       ` David Gibson
2016-03-17 15:15       ` Thomas Huth
2016-03-17 22:33         ` David Gibson
2016-03-18  7:56           ` Thomas Huth
2016-03-20  4:21             ` David Gibson
2016-03-16 12:16 ` [Qemu-devel] [PATCH 3/3] hw/net/spapr_llan: Enable the RX buffer pools by default for new machines Thomas Huth
2016-03-17  6:27   ` David Gibson
2016-03-18 13:15   ` [Qemu-devel] [Qemu-ppc] " Laurent Vivier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458130611-17304-2-git-send-email-thuth@redhat.com \
    --to=thuth@redhat.com \
    --cc=agraf@suse.de \
    --cc=aik@ozlabs.ru \
    --cc=anton@samba.org \
    --cc=david@gibson.dropbear.id.au \
    --cc=jasowang@redhat.com \
    --cc=lvivier@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).