From: "Daniel P. Berrange" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Subject: [Qemu-devel] [PULL v3 06/13] crypto: add support for the cast5-128 cipher algorithm
Date: Thu, 17 Mar 2016 16:53:47 +0000 [thread overview]
Message-ID: <1458233634-27709-7-git-send-email-berrange@redhat.com> (raw)
In-Reply-To: <1458233634-27709-1-git-send-email-berrange@redhat.com>
A new cipher algorithm 'cast-5-128' is defined for the
Cast-5 algorithm with 128 bit key size. Smaller key sizes
are supported by Cast-5, but nothing in QEMU should use
them, so only 128 bit keys are permitted.
The nettle and gcrypt cipher backends are updated to
support the new cipher and a test vector added to the
cipher test suite. The new algorithm is enabled in the
LUKS block encryption driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
crypto/cipher-gcrypt.c | 18 +++++++++++++++++-
crypto/cipher-nettle.c | 26 ++++++++++++++++++++++++++
crypto/cipher.c | 2 ++
qapi/crypto.json | 5 ++++-
tests/test-crypto-cipher.c | 9 +++++++++
5 files changed, 58 insertions(+), 2 deletions(-)
diff --git a/crypto/cipher-gcrypt.c b/crypto/cipher-gcrypt.c
index 56d4c9d..aa1d8c5 100644
--- a/crypto/cipher-gcrypt.c
+++ b/crypto/cipher-gcrypt.c
@@ -29,6 +29,7 @@ bool qcrypto_cipher_supports(QCryptoCipherAlgorithm alg)
case QCRYPTO_CIPHER_ALG_AES_128:
case QCRYPTO_CIPHER_ALG_AES_192:
case QCRYPTO_CIPHER_ALG_AES_256:
+ case QCRYPTO_CIPHER_ALG_CAST5_128:
return true;
default:
return false;
@@ -84,6 +85,10 @@ QCryptoCipher *qcrypto_cipher_new(QCryptoCipherAlgorithm alg,
gcryalg = GCRY_CIPHER_AES256;
break;
+ case QCRYPTO_CIPHER_ALG_CAST5_128:
+ gcryalg = GCRY_CIPHER_CAST5;
+ break;
+
default:
error_setg(errp, "Unsupported cipher algorithm %d", alg);
return NULL;
@@ -113,7 +118,18 @@ QCryptoCipher *qcrypto_cipher_new(QCryptoCipherAlgorithm alg,
ctx->blocksize = 8;
} else {
err = gcry_cipher_setkey(ctx->handle, key, nkey);
- ctx->blocksize = 16;
+ switch (cipher->alg) {
+ case QCRYPTO_CIPHER_ALG_AES_128:
+ case QCRYPTO_CIPHER_ALG_AES_192:
+ case QCRYPTO_CIPHER_ALG_AES_256:
+ ctx->blocksize = 16;
+ break;
+ case QCRYPTO_CIPHER_ALG_CAST5_128:
+ ctx->blocksize = 8;
+ break;
+ default:
+ g_assert_not_reached();
+ }
}
if (err != 0) {
error_setg(errp, "Cannot set key: %s",
diff --git a/crypto/cipher-nettle.c b/crypto/cipher-nettle.c
index cd2675c..cfa69cc 100644
--- a/crypto/cipher-nettle.c
+++ b/crypto/cipher-nettle.c
@@ -23,6 +23,7 @@
#include <nettle/aes.h>
#include <nettle/des.h>
#include <nettle/cbc.h>
+#include <nettle/cast128.h>
#if CONFIG_NETTLE_VERSION_MAJOR < 3
typedef nettle_crypt_func nettle_cipher_func;
@@ -63,6 +64,18 @@ static void des_decrypt_wrapper(cipher_ctx_t ctx, cipher_length_t length,
des_decrypt(ctx, length, dst, src);
}
+static void cast128_encrypt_wrapper(cipher_ctx_t ctx, cipher_length_t length,
+ uint8_t *dst, const uint8_t *src)
+{
+ cast128_encrypt(ctx, length, dst, src);
+}
+
+static void cast128_decrypt_wrapper(cipher_ctx_t ctx, cipher_length_t length,
+ uint8_t *dst, const uint8_t *src)
+{
+ cast128_decrypt(ctx, length, dst, src);
+}
+
typedef struct QCryptoCipherNettle QCryptoCipherNettle;
struct QCryptoCipherNettle {
void *ctx_encrypt;
@@ -80,6 +93,7 @@ bool qcrypto_cipher_supports(QCryptoCipherAlgorithm alg)
case QCRYPTO_CIPHER_ALG_AES_128:
case QCRYPTO_CIPHER_ALG_AES_192:
case QCRYPTO_CIPHER_ALG_AES_256:
+ case QCRYPTO_CIPHER_ALG_CAST5_128:
return true;
default:
return false;
@@ -143,6 +157,18 @@ QCryptoCipher *qcrypto_cipher_new(QCryptoCipherAlgorithm alg,
ctx->blocksize = AES_BLOCK_SIZE;
break;
+
+ case QCRYPTO_CIPHER_ALG_CAST5_128:
+ ctx->ctx_encrypt = g_new0(struct cast128_ctx, 1);
+ ctx->ctx_decrypt = NULL; /* 1 ctx can do both */
+
+ cast5_set_key(ctx->ctx_encrypt, nkey, key);
+
+ ctx->alg_encrypt = cast128_encrypt_wrapper;
+ ctx->alg_decrypt = cast128_decrypt_wrapper;
+
+ ctx->blocksize = CAST128_BLOCK_SIZE;
+ break;
default:
error_setg(errp, "Unsupported cipher algorithm %d", alg);
goto error;
diff --git a/crypto/cipher.c b/crypto/cipher.c
index 076dff0..9e0a226 100644
--- a/crypto/cipher.c
+++ b/crypto/cipher.c
@@ -27,6 +27,7 @@ static size_t alg_key_len[QCRYPTO_CIPHER_ALG__MAX] = {
[QCRYPTO_CIPHER_ALG_AES_192] = 24,
[QCRYPTO_CIPHER_ALG_AES_256] = 32,
[QCRYPTO_CIPHER_ALG_DES_RFB] = 8,
+ [QCRYPTO_CIPHER_ALG_CAST5_128] = 16,
};
static size_t alg_block_len[QCRYPTO_CIPHER_ALG__MAX] = {
@@ -34,6 +35,7 @@ static size_t alg_block_len[QCRYPTO_CIPHER_ALG__MAX] = {
[QCRYPTO_CIPHER_ALG_AES_192] = 16,
[QCRYPTO_CIPHER_ALG_AES_256] = 16,
[QCRYPTO_CIPHER_ALG_DES_RFB] = 8,
+ [QCRYPTO_CIPHER_ALG_CAST5_128] = 8,
};
static bool mode_need_iv[QCRYPTO_CIPHER_MODE__MAX] = {
diff --git a/qapi/crypto.json b/qapi/crypto.json
index 42b979a..0550ee7 100644
--- a/qapi/crypto.json
+++ b/qapi/crypto.json
@@ -59,11 +59,14 @@
# @aes-192: AES with 192 bit / 24 byte keys
# @aes-256: AES with 256 bit / 32 byte keys
# @des-rfb: RFB specific variant of single DES. Do not use except in VNC.
+# @cast5-128: Cast5 with 128 bit / 16 byte keys
# Since: 2.6
##
{ 'enum': 'QCryptoCipherAlgorithm',
'prefix': 'QCRYPTO_CIPHER_ALG',
- 'data': ['aes-128', 'aes-192', 'aes-256', 'des-rfb']}
+ 'data': ['aes-128', 'aes-192', 'aes-256',
+ 'des-rfb',
+ 'cast5-128']}
##
diff --git a/tests/test-crypto-cipher.c b/tests/test-crypto-cipher.c
index 7a073e9..a994ca9 100644
--- a/tests/test-crypto-cipher.c
+++ b/tests/test-crypto-cipher.c
@@ -165,6 +165,15 @@ static QCryptoCipherTestData test_data[] = {
"ffd29f1bb5596ad94ea2d8e6196b7f09"
"30d8ed0bf2773af36dd82a6280c20926",
},
+ {
+ /* RFC 2144, Appendix B.1 */
+ .path = "/crypto/cipher/cast5-128",
+ .alg = QCRYPTO_CIPHER_ALG_CAST5_128,
+ .mode = QCRYPTO_CIPHER_MODE_ECB,
+ .key = "0123456712345678234567893456789A",
+ .plaintext = "0123456789abcdef",
+ .ciphertext = "238b4fe5847e44b2",
+ },
};
--
2.5.0
next prev parent reply other threads:[~2016-03-17 16:54 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-17 16:53 [Qemu-devel] [PULL v3 00/13] Merge crypto code for LUKS encryption Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 01/13] crypto: add cryptographic random byte source Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 02/13] crypto: add support for PBKDF2 algorithm Daniel P. Berrange
2016-03-24 3:06 ` Wen Congyang
2016-03-29 9:09 ` Daniel P. Berrange
2016-03-29 14:50 ` Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 03/13] crypto: add support for generating initialization vectors Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 04/13] crypto: add support for anti-forensic split algorithm Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 05/13] crypto: skip testing of unsupported cipher algorithms Daniel P. Berrange
2016-03-17 16:53 ` Daniel P. Berrange [this message]
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 07/13] crypto: add support for the serpent cipher algorithm Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 08/13] crypto: add support for the twofish " Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 09/13] crypto: import an implementation of the XTS cipher mode Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 10/13] crypto: refactor code for dealing with AES cipher Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 11/13] crypto: wire up XTS mode for cipher APIs Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 12/13] crypto: add block encryption framework Daniel P. Berrange
2016-03-17 16:53 ` [Qemu-devel] [PULL v3 13/13] crypto: implement the LUKS block encryption format Daniel P. Berrange
2016-03-17 18:00 ` [Qemu-devel] [PULL v3 00/13] Merge crypto code for LUKS encryption Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458233634-27709-7-git-send-email-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).