From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org, mreitz@redhat.com
Subject: [Qemu-devel] [PATCH 14/20] nbd: Support BDRV_REQ_FUA
Date: Fri, 18 Mar 2016 19:21:23 +0100 [thread overview]
Message-ID: <1458325289-17848-15-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1458325289-17848-1-git-send-email-kwolf@redhat.com>
The NBD server already used to send a FUA flag when the writethrough
mode was set. This code was a remnant from the times where protocol
drivers actually had to implement writethrough modes. Since nowadays the
block layer sends flushes in writethrough mode and non-root nodes are
always writeback, this was mostly dead code - only mostly because if NBD
was configured to be used without a format, we sent _both_ FUA and an
explicit flush afterwards, which makes the code not technically dead,
but useless overhead.
This patch changes the code so that the block layer's FUA flag is
recognised and translated into a NBD FUA flag. The additional flush is
avoided now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/nbd-client.c | 13 +++++++------
block/nbd-client.h | 2 +-
block/nbd.c | 26 +++++++++++++++++++++-----
3 files changed, 29 insertions(+), 12 deletions(-)
diff --git a/block/nbd-client.c b/block/nbd-client.c
index 6a9b4c7..021a88b 100644
--- a/block/nbd-client.c
+++ b/block/nbd-client.c
@@ -243,15 +243,15 @@ static int nbd_co_readv_1(BlockDriverState *bs, int64_t sector_num,
static int nbd_co_writev_1(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov,
- int offset)
+ int offset, int *flags)
{
NbdClientSession *client = nbd_get_client_session(bs);
struct nbd_request request = { .type = NBD_CMD_WRITE };
struct nbd_reply reply;
ssize_t ret;
- if (!bdrv_enable_write_cache(bs) &&
- (client->nbdflags & NBD_FLAG_SEND_FUA)) {
+ if ((*flags & BDRV_REQ_FUA) && (client->nbdflags & NBD_FLAG_SEND_FUA)) {
+ *flags &= ~BDRV_REQ_FUA;
request.type |= NBD_CMD_FLAG_FUA;
}
@@ -291,12 +291,13 @@ int nbd_client_co_readv(BlockDriverState *bs, int64_t sector_num,
}
int nbd_client_co_writev(BlockDriverState *bs, int64_t sector_num,
- int nb_sectors, QEMUIOVector *qiov)
+ int nb_sectors, QEMUIOVector *qiov, int *flags)
{
int offset = 0;
int ret;
while (nb_sectors > NBD_MAX_SECTORS) {
- ret = nbd_co_writev_1(bs, sector_num, NBD_MAX_SECTORS, qiov, offset);
+ ret = nbd_co_writev_1(bs, sector_num, NBD_MAX_SECTORS, qiov, offset,
+ flags);
if (ret < 0) {
return ret;
}
@@ -304,7 +305,7 @@ int nbd_client_co_writev(BlockDriverState *bs, int64_t sector_num,
sector_num += NBD_MAX_SECTORS;
nb_sectors -= NBD_MAX_SECTORS;
}
- return nbd_co_writev_1(bs, sector_num, nb_sectors, qiov, offset);
+ return nbd_co_writev_1(bs, sector_num, nb_sectors, qiov, offset, flags);
}
int nbd_client_co_flush(BlockDriverState *bs)
diff --git a/block/nbd-client.h b/block/nbd-client.h
index 53f116d..bc7aec0 100644
--- a/block/nbd-client.h
+++ b/block/nbd-client.h
@@ -48,7 +48,7 @@ int nbd_client_co_discard(BlockDriverState *bs, int64_t sector_num,
int nb_sectors);
int nbd_client_co_flush(BlockDriverState *bs);
int nbd_client_co_writev(BlockDriverState *bs, int64_t sector_num,
- int nb_sectors, QEMUIOVector *qiov);
+ int nb_sectors, QEMUIOVector *qiov, int *flags);
int nbd_client_co_readv(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov);
diff --git a/block/nbd.c b/block/nbd.c
index 9f333c9..87887c4 100644
--- a/block/nbd.c
+++ b/block/nbd.c
@@ -355,9 +355,22 @@ static int nbd_co_readv(BlockDriverState *bs, int64_t sector_num,
}
static int nbd_co_writev(BlockDriverState *bs, int64_t sector_num,
- int nb_sectors, QEMUIOVector *qiov)
+ int nb_sectors, QEMUIOVector *qiov, int flags)
{
- return nbd_client_co_writev(bs, sector_num, nb_sectors, qiov);
+ int ret;
+
+ ret = nbd_client_co_writev(bs, sector_num, nb_sectors, qiov, &flags);
+ if (ret < 0) {
+ return ret;
+ }
+
+ /* The flag wasn't sent to the server, so we need to emulate it with an
+ * explicit flush */
+ if (flags & BDRV_REQ_FUA) {
+ ret = nbd_client_co_flush(bs);
+ }
+
+ return ret;
}
static int nbd_co_flush(BlockDriverState *bs)
@@ -456,7 +469,8 @@ static BlockDriver bdrv_nbd = {
.bdrv_parse_filename = nbd_parse_filename,
.bdrv_file_open = nbd_open,
.bdrv_co_readv = nbd_co_readv,
- .bdrv_co_writev = nbd_co_writev,
+ .bdrv_co_writev_flags = nbd_co_writev,
+ .supported_write_flags = BDRV_REQ_FUA,
.bdrv_close = nbd_close,
.bdrv_co_flush_to_os = nbd_co_flush,
.bdrv_co_discard = nbd_co_discard,
@@ -474,7 +488,8 @@ static BlockDriver bdrv_nbd_tcp = {
.bdrv_parse_filename = nbd_parse_filename,
.bdrv_file_open = nbd_open,
.bdrv_co_readv = nbd_co_readv,
- .bdrv_co_writev = nbd_co_writev,
+ .bdrv_co_writev_flags = nbd_co_writev,
+ .supported_write_flags = BDRV_REQ_FUA,
.bdrv_close = nbd_close,
.bdrv_co_flush_to_os = nbd_co_flush,
.bdrv_co_discard = nbd_co_discard,
@@ -492,7 +507,8 @@ static BlockDriver bdrv_nbd_unix = {
.bdrv_parse_filename = nbd_parse_filename,
.bdrv_file_open = nbd_open,
.bdrv_co_readv = nbd_co_readv,
- .bdrv_co_writev = nbd_co_writev,
+ .bdrv_co_writev_flags = nbd_co_writev,
+ .supported_write_flags = BDRV_REQ_FUA,
.bdrv_close = nbd_close,
.bdrv_co_flush_to_os = nbd_co_flush,
.bdrv_co_discard = nbd_co_discard,
--
1.8.3.1
next prev parent reply other threads:[~2016-03-18 18:22 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-18 18:21 [Qemu-devel] [PATCH 00/20] block: Implement writethrough in BlockBackend Kevin Wolf
2016-03-18 18:21 ` [Qemu-devel] [PATCH 01/20] block: Add bdrv_parse_cache_mode() Kevin Wolf
2016-03-26 17:05 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 02/20] qemu-nbd: Call blk_set_enable_write_cache() explicitly Kevin Wolf
2016-03-26 17:09 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 03/20] qemu-io: " Kevin Wolf
2016-03-26 17:18 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 04/20] qemu-img: Expand all BDRV_O_FLAGS uses Kevin Wolf
2016-03-26 17:34 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 05/20] qemu-img: Call blk_set_enable_write_cache() explicitly Kevin Wolf
2016-03-26 17:54 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 06/20] xen_disk: " Kevin Wolf
2016-03-22 11:08 ` Stefano Stabellini
2016-03-26 17:59 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 07/20] block: blockdev_init(): " Kevin Wolf
2016-03-26 18:13 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 08/20] block: Always set writeback mode in blk_new_open() Kevin Wolf
2016-03-26 18:36 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 09/20] block: Handle flush error in bdrv_pwrite_sync() Kevin Wolf
2016-03-26 18:46 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 10/20] block: Move enable_write_cache to BB level Kevin Wolf
2016-03-26 19:54 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 11/20] block/qapi: Use blk_enable_write_cache() Kevin Wolf
2016-03-26 20:14 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 12/20] block: Introduce bdrv_co_writev_flags() Kevin Wolf
2016-03-26 20:24 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 13/20] iscsi: Support BDRV_REQ_FUA Kevin Wolf
2016-03-26 20:33 ` Max Reitz
2016-03-26 20:44 ` Max Reitz
2016-03-29 11:02 ` Kevin Wolf
2016-03-18 18:21 ` Kevin Wolf [this message]
2016-03-26 20:46 ` [Qemu-devel] [PATCH 14/20] nbd: " Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 15/20] raw: " Kevin Wolf
2016-03-26 20:49 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 16/20] block: Use bdrv_parse_cache_mode() in drive_init() Kevin Wolf
2016-03-26 20:53 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 17/20] qemu-io: Use bdrv_parse_cache_mode() in reopen_f() Kevin Wolf
2016-03-26 21:05 ` Max Reitz
2016-03-29 10:16 ` Kevin Wolf
2016-03-18 18:21 ` [Qemu-devel] [PATCH 18/20] block: Remove bdrv_parse_cache_flags() Kevin Wolf
2016-03-26 21:06 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 19/20] block: Remove BDRV_O_CACHE_WB Kevin Wolf
2016-03-26 21:23 ` Max Reitz
2016-03-18 18:21 ` [Qemu-devel] [PATCH 20/20] block: Remove bdrv_(set_)enable_write_cache() Kevin Wolf
2016-03-26 21:25 ` Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458325289-17848-15-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).