qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Michael Roth <mdroth@linux.vnet.ibm.com>
To: qemu-devel@nongnu.org
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>,
	David Gibson <david@gibson.dropbear.id.au>,
	qemu-stable@nongnu.org, Greg Kurz <gkurz@linux.vnet.ibm.com>
Subject: [Qemu-devel] [PATCH 03/35] target-ppc: kvm: fix floating point registers sync on little-endian hosts
Date: Mon, 21 Mar 2016 12:28:01 -0500	[thread overview]
Message-ID: <1458581313-19045-4-git-send-email-mdroth@linux.vnet.ibm.com> (raw)
In-Reply-To: <1458581313-19045-1-git-send-email-mdroth@linux.vnet.ibm.com>

From: Greg Kurz <gkurz@linux.vnet.ibm.com>

On VSX capable CPUs, the 32 FP registers are mapped to the high-bits
of the 32 first VSX registers. So if you have:

VSR31 = (uint128) 0x0102030405060708090a0b0c0d0e0f00

then

FPR31 = (uint64) 0x0102030405060708

The kernel stores the VSX registers in the fp_state struct following the
host endian element ordering.

On big-endian:

fp_state.fpr[31][0] = 0x0102030405060708
fp_state.fpr[31][1] = 0x090a0b0c0d0e0f00

On little-endian:

fp_state.fpr[31][0] = 0x090a0b0c0d0e0f00
fp_state.fpr[31][1] = 0x0102030405060708

The KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls preserve this ordering, but
QEMU considers it as big-endian and always copies element [0] to the
fpr[] array and element [1] to the vsr[] array. This does not work with
little-endian hosts, and you will get:

(qemu) p $f31
0x90a0b0c0d0e0f00

instead of:

(qemu) p $f31
0x102030405060708

This patch fixes the element ordering for little-endian hosts.

Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
(cherry picked from commit 3a4b791b4c13e02537a5cc572fa3de70bc5f68da)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
---
 target-ppc/kvm.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c
index ac70f08..acd3275 100644
--- a/target-ppc/kvm.c
+++ b/target-ppc/kvm.c
@@ -650,8 +650,13 @@ static int kvm_put_fp(CPUState *cs)
         for (i = 0; i < 32; i++) {
             uint64_t vsr[2];
 
+#ifdef HOST_WORDS_BIGENDIAN
             vsr[0] = float64_val(env->fpr[i]);
             vsr[1] = env->vsr[i];
+#else
+            vsr[0] = env->vsr[i];
+            vsr[1] = float64_val(env->fpr[i]);
+#endif
             reg.addr = (uintptr_t) &vsr;
             reg.id = vsx ? KVM_REG_PPC_VSR(i) : KVM_REG_PPC_FPR(i);
 
@@ -721,10 +726,17 @@ static int kvm_get_fp(CPUState *cs)
                         vsx ? "VSR" : "FPR", i, strerror(errno));
                 return ret;
             } else {
+#ifdef HOST_WORDS_BIGENDIAN
                 env->fpr[i] = vsr[0];
                 if (vsx) {
                     env->vsr[i] = vsr[1];
                 }
+#else
+                env->fpr[i] = vsr[1];
+                if (vsx) {
+                    env->vsr[i] = vsr[0];
+                }
+#endif
             }
         }
     }
-- 
1.9.1

  parent reply	other threads:[~2016-03-21 17:30 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-21 17:27 [Qemu-devel] [PATCH 00/35] Patch Round-up for stable 2.5.1, freeze on 2016-03-25 Michael Roth
2016-03-21 17:27 ` [Qemu-devel] [PATCH 01/35] ehci: make idt processing more robust Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 02/35] net: vmxnet3: avoid memory leakage in activate_device Michael Roth
2016-03-21 17:28 ` Michael Roth [this message]
2016-03-21 17:28 ` [Qemu-devel] [PATCH 04/35] configure: Fix shell syntax to placate OpenBSD's pdksh Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 05/35] xen/blkif: Avoid double access to src->nr_segments Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 06/35] xenfb: avoid reading twice the same fields from the shared page Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 07/35] virtio-9p: use accessor to get thread_pool Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 08/35] scsi: initialise info object with appropriate size Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 09/35] ivshmem: no need for opaque argument Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 10/35] ivshmem: remove redundant assignment, fix crash with msi=off Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 11/35] net: rocker: fix an incorrect array bounds check Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 12/35] block: Add blk_dev_has_tray() Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 13/35] blockdev: Fix 'change' for slot devices Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 14/35] net/dump: fix nfds->filename leak Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 15/35] net/filter: fix nf->netdev_id leak Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 16/35] net: ne2000: check ring buffer control registers Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 17/35] net: set endianness on all backend devices Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 18/35] ehci: update irq on reset Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 19/35] block/raw-posix: avoid bogus fixup for cylinders on DASD disks Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 20/35] s390x/ioinst: set type and len for SEI response Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 21/35] s390x/css: fix control flags during csch Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 22/35] fw_cfg: avoid calculating invalid current entry pointer Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 23/35] cpus: use broadcast on qemu_pause_cond Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 24/35] qmp: Fix reference-counting of qnull on empty output visit Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 25/35] block: set device_list.tqe_prev to NULL on BDS removal Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 26/35] block: qemu-iotests - add test for snapshot, commit, snapshot bug Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 27/35] e1000: eliminate infinite loops on out-of-bounds transfer start Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 28/35] spapr: skip configuration section during migration of older machines Michael Roth
2016-03-22  7:49   ` [Qemu-devel] [Qemu-stable] " Greg Kurz
2016-03-22 22:35     ` Michael Roth
2016-03-23  7:59       ` Greg Kurz
2016-03-21 17:28 ` [Qemu-devel] [PATCH 29/35] hw/virtio: fix double use of a virtio flag Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 30/35] hw/virtio: group virtio flags into an enum Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 31/35] fw_cfg: unbreak migration compatibility for 2.4 and earlier machines Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 32/35] vhost-user: don't merge regions with different fds Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 33/35] target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 34/35] quorum: Fix crash in quorum_aio_cb() Michael Roth
2016-03-21 17:28 ` [Qemu-devel] [PATCH 35/35] vl.c: Fix regression in machine error message Michael Roth
2016-03-21 19:32 ` [Qemu-devel] [Qemu-stable] [PATCH 00/35] Patch Round-up for stable 2.5.1, freeze on 2016-03-25 Cole Robinson
2016-03-22 22:47   ` Michael Roth
2016-03-22 10:00 ` Peter Lieven
2016-03-22 22:45   ` Michael Roth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458581313-19045-4-git-send-email-mdroth@linux.vnet.ibm.com \
    --to=mdroth@linux.vnet.ibm.com \
    --cc=david@gibson.dropbear.id.au \
    --cc=gkurz@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-stable@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).