From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 06/10] target-tricore: add add.f/sub.f instructions
Date: Tue, 22 Mar 2016 14:46:22 +0100 [thread overview]
Message-ID: <1458654386-1001-7-git-send-email-kbastian@mail.uni-paderborn.de> (raw)
In-Reply-To: <1458654386-1001-1-git-send-email-kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <1457708597-3025-4-git-send-email-kbastian@mail.uni-paderborn.de>
---
target-tricore/fpu_helper.c | 29 ++++++++++++++++++++++++++++-
target-tricore/helper.h | 2 ++
target-tricore/translate.c | 6 ++++++
3 files changed, 36 insertions(+), 1 deletion(-)
diff --git a/target-tricore/fpu_helper.c b/target-tricore/fpu_helper.c
index ab00dd0..f81527d 100644
--- a/target-tricore/fpu_helper.c
+++ b/target-tricore/fpu_helper.c
@@ -57,7 +57,7 @@ static inline bool f_is_denormal(float32 arg)
return float32_is_zero_or_denormal(arg) && !float32_is_zero(arg);
}
-static inline void f_update_psw_flags(CPUTriCoreState *env, uint8_t flags)
+static void f_update_psw_flags(CPUTriCoreState *env, uint8_t flags)
{
uint8_t some_excp = 0;
set_float_exception_flags(0, &env->fp_status);
@@ -89,3 +89,30 @@ static inline void f_update_psw_flags(CPUTriCoreState *env, uint8_t flags)
env->FPU_FS = some_excp;
}
+
+#define FADD_SUB(op) \
+uint32_t helper_f##op(CPUTriCoreState *env, uint32_t r1, uint32_t r2) \
+{ \
+ float32 arg1 = make_float32(r1); \
+ float32 arg2 = make_float32(r2); \
+ uint32_t flags; \
+ float32 f_result; \
+ \
+ f_result = float32_##op(arg2, arg1, &env->fp_status); \
+ flags = f_get_excp_flags(env); \
+ if (flags) { \
+ /* If the output is a NaN, but the inputs aren't, \
+ we return a unique value. */ \
+ if ((flags & float_flag_invalid) \
+ && !float32_is_any_nan(arg1) \
+ && !float32_is_any_nan(arg2)) { \
+ f_result = ADD_NAN; \
+ } \
+ f_update_psw_flags(env, flags); \
+ } else { \
+ env->FPU_FS = 0; \
+ } \
+ return (uint32_t)f_result; \
+}
+FADD_SUB(add)
+FADD_SUB(sub)
diff --git a/target-tricore/helper.h b/target-tricore/helper.h
index 2c8ed78..2f4a2bb 100644
--- a/target-tricore/helper.h
+++ b/target-tricore/helper.h
@@ -105,6 +105,8 @@ DEF_HELPER_FLAGS_1(parity, TCG_CALL_NO_RWG_SE, i32, i32)
/* float */
DEF_HELPER_FLAGS_4(pack, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32, i32)
DEF_HELPER_1(unpack, i64, i32)
+DEF_HELPER_3(fadd, i32, env, i32, i32)
+DEF_HELPER_3(fsub, i32, env, i32, i32)
/* dvinit */
DEF_HELPER_3(dvinit_b_13, i64, env, i32, i32)
DEF_HELPER_3(dvinit_b_131, i64, env, i32, i32)
diff --git a/target-tricore/translate.c b/target-tricore/translate.c
index bccdcc3..c4c7717 100644
--- a/target-tricore/translate.c
+++ b/target-tricore/translate.c
@@ -7061,6 +7061,12 @@ static void decode_rrr_divide(CPUTriCoreState *env, DisasContext *ctx)
gen_helper_pack(cpu_gpr_d[r4], cpu_PSW_C, cpu_gpr_d[r3],
cpu_gpr_d[r3+1], cpu_gpr_d[r1]);
break;
+ case OPC2_32_RRR_ADD_F:
+ gen_helper_fadd(cpu_gpr_d[r4], cpu_env, cpu_gpr_d[r1], cpu_gpr_d[r3]);
+ break;
+ case OPC2_32_RRR_SUB_F:
+ gen_helper_fsub(cpu_gpr_d[r4], cpu_env, cpu_gpr_d[r1], cpu_gpr_d[r3]);
+ break;
default:
generate_trap(ctx, TRAPC_INSN_ERR, TIN2_IOPC);
}
--
2.7.4
next prev parent reply other threads:[~2016-03-22 13:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-22 13:46 [Qemu-devel] [PULL 00/10] tricore-patches Bastian Koppelmann
2016-03-22 13:46 ` [Qemu-devel] [PULL 01/10] target-tricore: add missing break in insn decode switch stmt Bastian Koppelmann
2016-03-22 13:46 ` [Qemu-devel] [PULL 02/10] target-tricore: Fix helper_msub64_q_ssov not reseting OVF bit Bastian Koppelmann
2016-03-22 13:46 ` [Qemu-devel] [PULL 03/10] target-tricore: Fix psw_read() clearing too many bits Bastian Koppelmann
2016-03-22 13:46 ` [Qemu-devel] [PULL 04/10] target-tricore: Add FPU infrastructure Bastian Koppelmann
2016-03-22 13:46 ` [Qemu-devel] [PULL 05/10] target-tricore: Move general CHECK_REG_PAIR of decode_rrr_divide Bastian Koppelmann
2016-03-22 13:46 ` Bastian Koppelmann [this message]
2016-03-22 13:46 ` [Qemu-devel] [PULL 07/10] target-tricore: Add mul.f instruction Bastian Koppelmann
2016-03-22 13:46 ` [Qemu-devel] [PULL 08/10] target-tricore: Add div.f instruction Bastian Koppelmann
2016-03-22 13:46 ` [Qemu-devel] [PULL 09/10] target-tricore: Add cmp.f instruction Bastian Koppelmann
2016-03-22 13:46 ` [Qemu-devel] [PULL 10/10] target-tricore: Add ftoi and itof instructions Bastian Koppelmann
2016-03-22 20:15 ` [Qemu-devel] [PULL 00/10] tricore-patches Peter Maydell
2016-03-23 8:17 ` Bastian Koppelmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458654386-1001-7-git-send-email-kbastian@mail.uni-paderborn.de \
--to=kbastian@mail.uni-paderborn.de \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).