qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, alex@alex.org.uk,
	Kevin Wolf <kwolf@redhat.com>, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v3 11/44] nand: Switch to byte-based block access
Date: Fri, 22 Apr 2016 17:40:19 -0600	[thread overview]
Message-ID: <1461368452-10389-12-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1461368452-10389-1-git-send-email-eblake@redhat.com>

Sector-based blk_write() should die; switch to byte-based
blk_pwrite() instead.  Likewise for blk_read().

This file is doing some complex computations to map various
flash page sizes (256, 512, and 2048) atop generic uses of
512-byte sector operations.  Perhaps someone will want to tidy
up the file for fewer gymnastics in managing addresses and
offsets, and less wasteful visits of 256-byte pages, but it
was out of scope for this series, where I just went with the
mechanical conversion.

Signed-off-by: Eric Blake <eblake@redhat.com>
---
 hw/block/nand.c | 36 +++++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/hw/block/nand.c b/hw/block/nand.c
index 29c6596..2703ff4 100644
--- a/hw/block/nand.c
+++ b/hw/block/nand.c
@@ -663,7 +663,8 @@ static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
         sector = SECTOR(s->addr);
         off = (s->addr & PAGE_MASK) + s->offset;
         soff = SECTOR_OFFSET(s->addr);
-        if (blk_read(s->blk, sector, iobuf, PAGE_SECTORS) < 0) {
+        if (blk_pread(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+                      PAGE_SECTORS << BDRV_SECTOR_BITS) < 0) {
             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
             return;
         }
@@ -675,21 +676,24 @@ static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
                             MIN(OOB_SIZE, off + s->iolen - PAGE_SIZE));
         }

-        if (blk_write(s->blk, sector, iobuf, PAGE_SECTORS) < 0) {
+        if (blk_pwrite(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+                       PAGE_SECTORS << BDRV_SECTOR_BITS, 0) < 0) {
             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
         }
     } else {
         off = PAGE_START(s->addr) + (s->addr & PAGE_MASK) + s->offset;
         sector = off >> 9;
         soff = off & 0x1ff;
-        if (blk_read(s->blk, sector, iobuf, PAGE_SECTORS + 2) < 0) {
+        if (blk_pread(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+                     (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS) < 0) {
             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
             return;
         }

         mem_and(iobuf + soff, s->io, s->iolen);

-        if (blk_write(s->blk, sector, iobuf, PAGE_SECTORS + 2) < 0) {
+        if (blk_write(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+                      (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS, 0) < 0) {
             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
         }
     }
@@ -716,17 +720,20 @@ static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
         i = SECTOR(addr);
         page = SECTOR(addr + (1 << (ADDR_SHIFT + s->erase_shift)));
         for (; i < page; i ++)
-            if (blk_write(s->blk, i, iobuf, 1) < 0) {
+            if (blk_pwrite(s->blk, i << BDRV_SECTOR_BITS, iobuf,
+                           BDRV_SECTOR_SIZE, 0) < 0) {
                 printf("%s: write error in sector %" PRIu64 "\n", __func__, i);
             }
     } else {
         addr = PAGE_START(addr);
         page = addr >> 9;
-        if (blk_read(s->blk, page, iobuf, 1) < 0) {
+        if (blk_pread(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+                      BDRV_SECTOR_SIZE) < 0) {
             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
         }
         memset(iobuf + (addr & 0x1ff), 0xff, (~addr & 0x1ff) + 1);
-        if (blk_write(s->blk, page, iobuf, 1) < 0) {
+        if (blk_pwrite(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+                       BDRV_SECTOR_SIZE, 0) < 0) {
             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
         }

@@ -734,18 +741,20 @@ static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
         i = (addr & ~0x1ff) + 0x200;
         for (addr += ((PAGE_SIZE + OOB_SIZE) << s->erase_shift) - 0x200;
                         i < addr; i += 0x200) {
-            if (blk_write(s->blk, i >> 9, iobuf, 1) < 0) {
+            if (blk_pwrite(s->blk, i, iobuf, BDRV_SECTOR_SIZE, 0) < 0) {
                 printf("%s: write error in sector %" PRIu64 "\n",
                        __func__, i >> 9);
             }
         }

         page = i >> 9;
-        if (blk_read(s->blk, page, iobuf, 1) < 0) {
+        if (blk_pread(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+                      BDRV_SECTOR_SIZE) < 0) {
             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
         }
         memset(iobuf, 0xff, ((addr - 1) & 0x1ff) + 1);
-        if (blk_write(s->blk, page, iobuf, 1) < 0) {
+        if (blk_pwrite(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+                       BDRV_SECTOR_SIZE, 0) < 0) {
             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
         }
     }
@@ -760,7 +769,8 @@ static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,

     if (s->blk) {
         if (s->mem_oob) {
-            if (blk_read(s->blk, SECTOR(addr), s->io, PAGE_SECTORS) < 0) {
+            if (blk_pread(s->blk, SECTOR(addr) << BDRV_SECTOR_BITS, s->io,
+                          PAGE_SECTORS << BDRV_SECTOR_BITS) < 0) {
                 printf("%s: read error in sector %" PRIu64 "\n",
                                 __func__, SECTOR(addr));
             }
@@ -769,8 +779,8 @@ static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,
                             OOB_SIZE);
             s->ioaddr = s->io + SECTOR_OFFSET(s->addr) + offset;
         } else {
-            if (blk_read(s->blk, PAGE_START(addr) >> 9,
-                         s->io, (PAGE_SECTORS + 2)) < 0) {
+            if (blk_pread(s->blk, PAGE_START(addr), s->io,
+                          (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS) < 0) {
                 printf("%s: read error in sector %" PRIu64 "\n",
                                 __func__, PAGE_START(addr) >> 9);
             }
-- 
2.5.5

  parent reply	other threads:[~2016-04-22 23:41 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-22 23:40 [Qemu-devel] [PATCH v3 00/44] NBD protocol additions Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 01/44] nbd: More debug typo fixes, use correct formats Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 02/44] nbd: Quit server after any write error Eric Blake
2016-04-25  9:21   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 03/44] nbd: Improve server handling of bogus commands Eric Blake
2016-04-25  9:29   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 04/44] nbd: Reject unknown request flags Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 05/44] nbd: Group all Linux-specific ioctl code in one place Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 06/44] nbd: Clean up ioctl handling of qemu-nbd -c Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 07/44] nbd: Limit nbdflags to 16 bits Eric Blake
2016-04-25  9:24   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 08/44] nbd: Add qemu-nbd -D for human-readable description Eric Blake
2016-04-25  9:25   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 09/44] block: Allow BDRV_REQ_FUA through blk_pwrite() Eric Blake
2016-04-23  8:12   ` Denis V. Lunev
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 10/44] fdc: Switch to byte-based block access Eric Blake
2016-04-22 23:40 ` Eric Blake [this message]
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 12/44] onenand: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 13/44] pflash: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 14/44] sd: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 15/44] m25p80: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 16/44] atapi: " Eric Blake
2016-04-25 21:36   ` John Snow
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 17/44] nbd: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 18/44] qemu-img: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 19/44] qemu-io: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 20/44] block: Switch blk_read_unthrottled() to byte interface Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 21/44] block: Switch blk_write_zeroes() " Eric Blake
2016-04-23  8:12   ` Denis V. Lunev
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 22/44] block: Kill blk_write(), blk_read() Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 23/44] qemu-io: Add missing option documentation Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 24/44] qemu-io: Add 'write -f' to test FUA flag Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 25/44] qemu-io: Add 'open -u' to set BDRV_O_UNMAP after the fact Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 26/44] qemu-io: Add 'write -z -u' to test MAY_UNMAP flag Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 27/44] nbd: Use BDRV_REQ_FUA for better FUA where supported Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 28/44] nbd: Detect servers that send unexpected error values Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 29/44] nbd: Avoid magic number for NBD max name size Eric Blake
2016-04-25  9:32   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 30/44] nbd: Treat flags vs. command type as separate fields Eric Blake
2016-04-25  9:34   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 31/44] nbd: Share common reply-sending code in server Eric Blake
2016-04-25  9:34   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 32/44] nbd: Share common option-sending code in client Eric Blake
2016-04-25  9:37   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 33/44] nbd: Let client skip portions of server reply Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 34/44] nbd: Less allocation during NBD_OPT_LIST Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 35/44] nbd: Support shorter handshake Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 36/44] nbd: Improve handling of shutdown requests Eric Blake
2016-04-25  9:47   ` Alex Bligh
2016-04-25 19:20     ` Eric Blake
2016-04-25 19:40       ` Alex Bligh
2016-04-25 19:48         ` Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 37/44] nbd: Create struct for tracking export info Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 38/44] block: Add blk_get_opt_transfer_length() Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 39/44] nbd: Implement NBD_OPT_GO on server Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 40/44] nbd: Implement NBD_OPT_GO on client Eric Blake
2016-04-25 10:31   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 41/44] nbd: Implement NBD_CMD_WRITE_ZEROES on server Eric Blake
2016-04-23  9:00   ` Pavel Borzenkov
2016-04-25 12:11   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 42/44] nbd: Implement NBD_CMD_WRITE_ZEROES on client Eric Blake
2016-04-25 12:12   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 43/44] nbd: Implement NBD_OPT_BLOCK_SIZE on server Eric Blake
2016-04-25 12:16   ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 44/44] nbd: Implement NBD_OPT_BLOCK_SIZE on client Eric Blake
2016-04-25 12:19   ` Alex Bligh
2016-04-25 19:16     ` Eric Blake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461368452-10389-12-git-send-email-eblake@redhat.com \
    --to=eblake@redhat.com \
    --cc=alex@alex.org.uk \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).