From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, alex@alex.org.uk,
Paolo Bonzini <pbonzini@redhat.com>,
Kevin Wolf <kwolf@redhat.com>, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v3 42/44] nbd: Implement NBD_CMD_WRITE_ZEROES on client
Date: Fri, 22 Apr 2016 17:40:50 -0600 [thread overview]
Message-ID: <1461368452-10389-43-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1461368452-10389-1-git-send-email-eblake@redhat.com>
Upstream NBD protocol recently added the ability to efficiently
write zeroes without having to send the zeroes over the wire,
along with a flag to control whether the client wants a hole.
The generic block code takes care of falling back to the obvious
write of lots of zeroes if we return -ENOTSUP because the server
does not have WRITE_ZEROES.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
v3: rebase, tell block layer about our support
---
block/nbd-client.h | 2 ++
block/nbd-client.c | 34 ++++++++++++++++++++++++++++++++++
block/nbd.c | 24 ++++++++++++++++++++++++
3 files changed, 60 insertions(+)
diff --git a/block/nbd-client.h b/block/nbd-client.h
index 0867147..07630ab 100644
--- a/block/nbd-client.h
+++ b/block/nbd-client.h
@@ -46,6 +46,8 @@ void nbd_client_close(BlockDriverState *bs);
int nbd_client_co_discard(BlockDriverState *bs, int64_t sector_num,
int nb_sectors);
int nbd_client_co_flush(BlockDriverState *bs);
+int nbd_client_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
+ int nb_sectors, int *flags);
int nbd_client_co_writev(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov, int *flags);
int nbd_client_co_readv(BlockDriverState *bs, int64_t sector_num,
diff --git a/block/nbd-client.c b/block/nbd-client.c
index f20219b..2b6ac27 100644
--- a/block/nbd-client.c
+++ b/block/nbd-client.c
@@ -291,6 +291,40 @@ int nbd_client_co_readv(BlockDriverState *bs, int64_t sector_num,
return nbd_co_readv_1(bs, sector_num, nb_sectors, qiov, offset);
}
+int nbd_client_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
+ int nb_sectors, int *flags)
+{
+ ssize_t ret;
+ NbdClientSession *client = nbd_get_client_session(bs);
+ struct nbd_request request = { .type = NBD_CMD_WRITE_ZEROES };
+ struct nbd_reply reply;
+
+ if (!(client->info.flags & NBD_FLAG_SEND_WRITE_ZEROES)) {
+ return -ENOTSUP;
+ }
+
+ if ((*flags & BDRV_REQ_FUA) && (client->info.flags & NBD_FLAG_SEND_FUA)) {
+ *flags &= ~BDRV_REQ_FUA;
+ request.flags |= NBD_CMD_FLAG_FUA;
+ }
+ if (!(*flags & BDRV_REQ_MAY_UNMAP)) {
+ request.flags |= NBD_CMD_FLAG_NO_HOLE;
+ }
+
+ request.from = sector_num * 512;
+ request.len = nb_sectors * 512;
+
+ nbd_coroutine_start(client, &request);
+ ret = nbd_co_send_request(bs, &request, NULL, 0);
+ if (ret < 0) {
+ reply.error = -ret;
+ } else {
+ nbd_co_receive_reply(client, &request, &reply, NULL, 0);
+ }
+ nbd_coroutine_end(client, &request);
+ return -reply.error;
+}
+
int nbd_client_co_writev(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov, int *flags)
{
diff --git a/block/nbd.c b/block/nbd.c
index 34db83e..5172039 100644
--- a/block/nbd.c
+++ b/block/nbd.c
@@ -355,6 +355,26 @@ static int nbd_co_readv(BlockDriverState *bs, int64_t sector_num,
return nbd_client_co_readv(bs, sector_num, nb_sectors, qiov);
}
+static int nbd_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
+ int nb_sectors, BdrvRequestFlags orig_flags)
+{
+ int flags = orig_flags;
+ int ret;
+
+ ret = nbd_client_co_write_zeroes(bs, sector_num, nb_sectors, &flags);
+ if (ret < 0) {
+ return ret;
+ }
+
+ /* The flag wasn't sent to the server, so we need to emulate it with an
+ * explicit flush */
+ if (flags & BDRV_REQ_FUA) {
+ ret = nbd_client_co_flush(bs);
+ }
+
+ return ret;
+}
+
static int nbd_co_writev_flags(BlockDriverState *bs, int64_t sector_num,
int nb_sectors, QEMUIOVector *qiov, int flags)
{
@@ -388,6 +408,7 @@ static int nbd_co_flush(BlockDriverState *bs)
static void nbd_refresh_limits(BlockDriverState *bs, Error **errp)
{
bs->bl.max_discard = UINT32_MAX >> BDRV_SECTOR_BITS;
+ bs->bl.max_write_zeroes = UINT32_MAX >> BDRV_SECTOR_BITS;
bs->bl.max_transfer_length = UINT32_MAX >> BDRV_SECTOR_BITS;
}
@@ -476,6 +497,7 @@ static BlockDriver bdrv_nbd = {
.bdrv_parse_filename = nbd_parse_filename,
.bdrv_file_open = nbd_open,
.bdrv_co_readv = nbd_co_readv,
+ .bdrv_co_write_zeroes = nbd_co_write_zeroes,
.bdrv_co_writev = nbd_co_writev,
.bdrv_co_writev_flags = nbd_co_writev_flags,
.supported_write_flags = BDRV_REQ_FUA,
@@ -496,6 +518,7 @@ static BlockDriver bdrv_nbd_tcp = {
.bdrv_parse_filename = nbd_parse_filename,
.bdrv_file_open = nbd_open,
.bdrv_co_readv = nbd_co_readv,
+ .bdrv_co_write_zeroes = nbd_co_write_zeroes,
.bdrv_co_writev = nbd_co_writev,
.bdrv_co_writev_flags = nbd_co_writev_flags,
.supported_write_flags = BDRV_REQ_FUA,
@@ -516,6 +539,7 @@ static BlockDriver bdrv_nbd_unix = {
.bdrv_parse_filename = nbd_parse_filename,
.bdrv_file_open = nbd_open,
.bdrv_co_readv = nbd_co_readv,
+ .bdrv_co_write_zeroes = nbd_co_write_zeroes,
.bdrv_co_writev = nbd_co_writev,
.bdrv_co_writev_flags = nbd_co_writev_flags,
.supported_write_flags = BDRV_REQ_FUA,
--
2.5.5
next prev parent reply other threads:[~2016-04-22 23:41 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-22 23:40 [Qemu-devel] [PATCH v3 00/44] NBD protocol additions Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 01/44] nbd: More debug typo fixes, use correct formats Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 02/44] nbd: Quit server after any write error Eric Blake
2016-04-25 9:21 ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 03/44] nbd: Improve server handling of bogus commands Eric Blake
2016-04-25 9:29 ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 04/44] nbd: Reject unknown request flags Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 05/44] nbd: Group all Linux-specific ioctl code in one place Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 06/44] nbd: Clean up ioctl handling of qemu-nbd -c Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 07/44] nbd: Limit nbdflags to 16 bits Eric Blake
2016-04-25 9:24 ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 08/44] nbd: Add qemu-nbd -D for human-readable description Eric Blake
2016-04-25 9:25 ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 09/44] block: Allow BDRV_REQ_FUA through blk_pwrite() Eric Blake
2016-04-23 8:12 ` Denis V. Lunev
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 10/44] fdc: Switch to byte-based block access Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 11/44] nand: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 12/44] onenand: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 13/44] pflash: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 14/44] sd: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 15/44] m25p80: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 16/44] atapi: " Eric Blake
2016-04-25 21:36 ` John Snow
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 17/44] nbd: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 18/44] qemu-img: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 19/44] qemu-io: " Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 20/44] block: Switch blk_read_unthrottled() to byte interface Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 21/44] block: Switch blk_write_zeroes() " Eric Blake
2016-04-23 8:12 ` Denis V. Lunev
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 22/44] block: Kill blk_write(), blk_read() Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 23/44] qemu-io: Add missing option documentation Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 24/44] qemu-io: Add 'write -f' to test FUA flag Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 25/44] qemu-io: Add 'open -u' to set BDRV_O_UNMAP after the fact Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 26/44] qemu-io: Add 'write -z -u' to test MAY_UNMAP flag Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 27/44] nbd: Use BDRV_REQ_FUA for better FUA where supported Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 28/44] nbd: Detect servers that send unexpected error values Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 29/44] nbd: Avoid magic number for NBD max name size Eric Blake
2016-04-25 9:32 ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 30/44] nbd: Treat flags vs. command type as separate fields Eric Blake
2016-04-25 9:34 ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 31/44] nbd: Share common reply-sending code in server Eric Blake
2016-04-25 9:34 ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 32/44] nbd: Share common option-sending code in client Eric Blake
2016-04-25 9:37 ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 33/44] nbd: Let client skip portions of server reply Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 34/44] nbd: Less allocation during NBD_OPT_LIST Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 35/44] nbd: Support shorter handshake Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 36/44] nbd: Improve handling of shutdown requests Eric Blake
2016-04-25 9:47 ` Alex Bligh
2016-04-25 19:20 ` Eric Blake
2016-04-25 19:40 ` Alex Bligh
2016-04-25 19:48 ` Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 37/44] nbd: Create struct for tracking export info Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 38/44] block: Add blk_get_opt_transfer_length() Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 39/44] nbd: Implement NBD_OPT_GO on server Eric Blake
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 40/44] nbd: Implement NBD_OPT_GO on client Eric Blake
2016-04-25 10:31 ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 41/44] nbd: Implement NBD_CMD_WRITE_ZEROES on server Eric Blake
2016-04-23 9:00 ` Pavel Borzenkov
2016-04-25 12:11 ` Alex Bligh
2016-04-22 23:40 ` Eric Blake [this message]
2016-04-25 12:12 ` [Qemu-devel] [PATCH v3 42/44] nbd: Implement NBD_CMD_WRITE_ZEROES on client Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 43/44] nbd: Implement NBD_OPT_BLOCK_SIZE on server Eric Blake
2016-04-25 12:16 ` Alex Bligh
2016-04-22 23:40 ` [Qemu-devel] [PATCH v3 44/44] nbd: Implement NBD_OPT_BLOCK_SIZE on client Eric Blake
2016-04-25 12:19 ` Alex Bligh
2016-04-25 19:16 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461368452-10389-43-git-send-email-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=alex@alex.org.uk \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).