From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org, quintela@redhat.com, amit.shah@redhat.com
Cc: aarcange@redhat.com, den@openvz.org, marcel.a@redhat.com,
eblake@redhat.com
Subject: [Qemu-devel] [PATCH v2 2/5] Migration: Split out ram part of qmp_query_migrate
Date: Fri, 29 Apr 2016 15:47:40 +0100 [thread overview]
Message-ID: <1461941263-9523-3-git-send-email-dgilbert@redhat.com> (raw)
In-Reply-To: <1461941263-9523-1-git-send-email-dgilbert@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
The RAM section of qmp_query_migrate is reasonably complex
and repeated 3 times. Split it out into a helper.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
migration/migration.c | 57 ++++++++++++++++++++-------------------------------
1 file changed, 22 insertions(+), 35 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index 991313a..bfb326d 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -561,6 +561,25 @@ static void get_xbzrle_cache_stats(MigrationInfo *info)
}
}
+static void populate_ram_info(MigrationInfo *info, MigrationState *s)
+{
+ info->has_ram = true;
+ info->ram = g_malloc0(sizeof(*info->ram));
+ info->ram->transferred = ram_bytes_transferred();
+ info->ram->total = ram_bytes_total();
+ info->ram->duplicate = dup_mig_pages_transferred();
+ info->ram->skipped = skipped_mig_pages_transferred();
+ info->ram->normal = norm_mig_pages_transferred();
+ info->ram->normal_bytes = norm_mig_bytes_transferred();
+ info->ram->mbps = s->mbps;
+ info->ram->dirty_sync_count = s->dirty_sync_count;
+
+ if (s->state != MIGRATION_STATUS_COMPLETED) {
+ info->ram->remaining = ram_bytes_remaining();
+ info->ram->dirty_pages_rate = s->dirty_pages_rate;
+ }
+}
+
MigrationInfo *qmp_query_migrate(Error **errp)
{
MigrationInfo *info = g_malloc0(sizeof(*info));
@@ -585,18 +604,7 @@ MigrationInfo *qmp_query_migrate(Error **errp)
info->has_setup_time = true;
info->setup_time = s->setup_time;
- info->has_ram = true;
- info->ram = g_malloc0(sizeof(*info->ram));
- info->ram->transferred = ram_bytes_transferred();
- info->ram->remaining = ram_bytes_remaining();
- info->ram->total = ram_bytes_total();
- info->ram->duplicate = dup_mig_pages_transferred();
- info->ram->skipped = skipped_mig_pages_transferred();
- info->ram->normal = norm_mig_pages_transferred();
- info->ram->normal_bytes = norm_mig_bytes_transferred();
- info->ram->dirty_pages_rate = s->dirty_pages_rate;
- info->ram->mbps = s->mbps;
- info->ram->dirty_sync_count = s->dirty_sync_count;
+ populate_ram_info(info, s);
if (blk_mig_active()) {
info->has_disk = true;
@@ -624,18 +632,7 @@ MigrationInfo *qmp_query_migrate(Error **errp)
info->has_setup_time = true;
info->setup_time = s->setup_time;
- info->has_ram = true;
- info->ram = g_malloc0(sizeof(*info->ram));
- info->ram->transferred = ram_bytes_transferred();
- info->ram->remaining = ram_bytes_remaining();
- info->ram->total = ram_bytes_total();
- info->ram->duplicate = dup_mig_pages_transferred();
- info->ram->skipped = skipped_mig_pages_transferred();
- info->ram->normal = norm_mig_pages_transferred();
- info->ram->normal_bytes = norm_mig_bytes_transferred();
- info->ram->dirty_pages_rate = s->dirty_pages_rate;
- info->ram->mbps = s->mbps;
- info->ram->dirty_sync_count = s->dirty_sync_count;
+ populate_ram_info(info, s);
if (blk_mig_active()) {
info->has_disk = true;
@@ -658,17 +655,7 @@ MigrationInfo *qmp_query_migrate(Error **errp)
info->has_setup_time = true;
info->setup_time = s->setup_time;
- info->has_ram = true;
- info->ram = g_malloc0(sizeof(*info->ram));
- info->ram->transferred = ram_bytes_transferred();
- info->ram->remaining = 0;
- info->ram->total = ram_bytes_total();
- info->ram->duplicate = dup_mig_pages_transferred();
- info->ram->skipped = skipped_mig_pages_transferred();
- info->ram->normal = norm_mig_pages_transferred();
- info->ram->normal_bytes = norm_mig_bytes_transferred();
- info->ram->mbps = s->mbps;
- info->ram->dirty_sync_count = s->dirty_sync_count;
+ populate_ram_info(info, s);
break;
case MIGRATION_STATUS_FAILED:
info->has_status = true;
--
2.5.5
next prev parent reply other threads:[~2016-04-29 14:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-29 14:47 [Qemu-devel] [PATCH v2 0/5] postcopy (& 1 test) patch for 2.7 Dr. David Alan Gilbert (git)
2016-04-29 14:47 ` [Qemu-devel] [PATCH v2 1/5] Postcopy: Avoid 0 length discards Dr. David Alan Gilbert (git)
2016-04-29 15:03 ` Denis V. Lunev
2016-04-29 14:47 ` Dr. David Alan Gilbert (git) [this message]
2016-04-29 14:56 ` [Qemu-devel] [PATCH v2 2/5] Migration: Split out ram part of qmp_query_migrate Eric Blake
2016-04-29 15:02 ` Denis V. Lunev
2016-04-29 14:47 ` [Qemu-devel] [PATCH v2 3/5] Postcopy: Add stats on page requests Dr. David Alan Gilbert (git)
2016-04-29 14:57 ` Eric Blake
2016-04-29 15:03 ` Denis V. Lunev
2016-04-29 14:47 ` [Qemu-devel] [PATCH v2 4/5] test: Postcopy Dr. David Alan Gilbert (git)
2016-05-01 8:44 ` Marcel Apfelbaum
2016-05-03 9:22 ` Dr. David Alan Gilbert
2016-05-03 10:05 ` Marcel Apfelbaum
2016-05-03 10:34 ` Dr. David Alan Gilbert
2016-05-03 10:42 ` Marcel Apfelbaum
2016-05-06 12:35 ` Dr. David Alan Gilbert
2016-04-29 14:47 ` [Qemu-devel] [PATCH v2 5/5] tests: fix libqtest socket timeouts Dr. David Alan Gilbert (git)
2016-05-01 8:22 ` Marcel Apfelbaum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461941263-9523-3-git-send-email-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=aarcange@redhat.com \
--cc=amit.shah@redhat.com \
--cc=den@openvz.org \
--cc=eblake@redhat.com \
--cc=marcel.a@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).