From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Max Reitz <mreitz@redhat.com>,
"open list:Block layer core" <qemu-block@nongnu.org>
Subject: [Qemu-devel] [PATCH v4 03/14] nand: Switch to byte-based block access
Date: Fri, 29 Apr 2016 14:08:25 -0600 [thread overview]
Message-ID: <1461960516-4717-4-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1461960516-4717-1-git-send-email-eblake@redhat.com>
Sector-based blk_write() should die; switch to byte-based
blk_pwrite() instead. Likewise for blk_read().
This file is doing some complex computations to map various
flash page sizes (256, 512, and 2048) atop generic uses of
512-byte sector operations. Perhaps someone will want to tidy
up the file for fewer gymnastics in managing addresses and
offsets, and less wasteful visits of 256-byte pages, but it
was out of scope for this series, where I just went with the
mechanical conversion.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
hw/block/nand.c | 36 +++++++++++++++++++++++-------------
1 file changed, 23 insertions(+), 13 deletions(-)
diff --git a/hw/block/nand.c b/hw/block/nand.c
index 29c6596..2703ff4 100644
--- a/hw/block/nand.c
+++ b/hw/block/nand.c
@@ -663,7 +663,8 @@ static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
sector = SECTOR(s->addr);
off = (s->addr & PAGE_MASK) + s->offset;
soff = SECTOR_OFFSET(s->addr);
- if (blk_read(s->blk, sector, iobuf, PAGE_SECTORS) < 0) {
+ if (blk_pread(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+ PAGE_SECTORS << BDRV_SECTOR_BITS) < 0) {
printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
return;
}
@@ -675,21 +676,24 @@ static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
MIN(OOB_SIZE, off + s->iolen - PAGE_SIZE));
}
- if (blk_write(s->blk, sector, iobuf, PAGE_SECTORS) < 0) {
+ if (blk_pwrite(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+ PAGE_SECTORS << BDRV_SECTOR_BITS, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
}
} else {
off = PAGE_START(s->addr) + (s->addr & PAGE_MASK) + s->offset;
sector = off >> 9;
soff = off & 0x1ff;
- if (blk_read(s->blk, sector, iobuf, PAGE_SECTORS + 2) < 0) {
+ if (blk_pread(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+ (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS) < 0) {
printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
return;
}
mem_and(iobuf + soff, s->io, s->iolen);
- if (blk_write(s->blk, sector, iobuf, PAGE_SECTORS + 2) < 0) {
+ if (blk_write(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+ (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
}
}
@@ -716,17 +720,20 @@ static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
i = SECTOR(addr);
page = SECTOR(addr + (1 << (ADDR_SHIFT + s->erase_shift)));
for (; i < page; i ++)
- if (blk_write(s->blk, i, iobuf, 1) < 0) {
+ if (blk_pwrite(s->blk, i << BDRV_SECTOR_BITS, iobuf,
+ BDRV_SECTOR_SIZE, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, i);
}
} else {
addr = PAGE_START(addr);
page = addr >> 9;
- if (blk_read(s->blk, page, iobuf, 1) < 0) {
+ if (blk_pread(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+ BDRV_SECTOR_SIZE) < 0) {
printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
}
memset(iobuf + (addr & 0x1ff), 0xff, (~addr & 0x1ff) + 1);
- if (blk_write(s->blk, page, iobuf, 1) < 0) {
+ if (blk_pwrite(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+ BDRV_SECTOR_SIZE, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
}
@@ -734,18 +741,20 @@ static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
i = (addr & ~0x1ff) + 0x200;
for (addr += ((PAGE_SIZE + OOB_SIZE) << s->erase_shift) - 0x200;
i < addr; i += 0x200) {
- if (blk_write(s->blk, i >> 9, iobuf, 1) < 0) {
+ if (blk_pwrite(s->blk, i, iobuf, BDRV_SECTOR_SIZE, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n",
__func__, i >> 9);
}
}
page = i >> 9;
- if (blk_read(s->blk, page, iobuf, 1) < 0) {
+ if (blk_pread(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+ BDRV_SECTOR_SIZE) < 0) {
printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
}
memset(iobuf, 0xff, ((addr - 1) & 0x1ff) + 1);
- if (blk_write(s->blk, page, iobuf, 1) < 0) {
+ if (blk_pwrite(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+ BDRV_SECTOR_SIZE, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
}
}
@@ -760,7 +769,8 @@ static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,
if (s->blk) {
if (s->mem_oob) {
- if (blk_read(s->blk, SECTOR(addr), s->io, PAGE_SECTORS) < 0) {
+ if (blk_pread(s->blk, SECTOR(addr) << BDRV_SECTOR_BITS, s->io,
+ PAGE_SECTORS << BDRV_SECTOR_BITS) < 0) {
printf("%s: read error in sector %" PRIu64 "\n",
__func__, SECTOR(addr));
}
@@ -769,8 +779,8 @@ static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,
OOB_SIZE);
s->ioaddr = s->io + SECTOR_OFFSET(s->addr) + offset;
} else {
- if (blk_read(s->blk, PAGE_START(addr) >> 9,
- s->io, (PAGE_SECTORS + 2)) < 0) {
+ if (blk_pread(s->blk, PAGE_START(addr), s->io,
+ (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS) < 0) {
printf("%s: read error in sector %" PRIu64 "\n",
__func__, PAGE_START(addr) >> 9);
}
--
2.5.5
next prev parent reply other threads:[~2016-04-29 20:09 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-29 20:08 [Qemu-devel] [PATCH v4 00/14] block: kill sector-based blk_write/read Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 01/14] block: Allow BDRV_REQ_FUA through blk_pwrite() Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 02/14] fdc: Switch to byte-based block access Eric Blake
2016-04-29 20:08 ` Eric Blake [this message]
2016-05-02 15:35 ` [Qemu-devel] [PATCH v4 03/14] nand: " Kevin Wolf
2016-05-02 21:09 ` Eric Blake
2016-05-03 7:45 ` Kevin Wolf
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 04/14] onenand: " Eric Blake
2016-05-02 15:35 ` Kevin Wolf
2016-05-02 21:16 ` Eric Blake
2016-05-02 21:29 ` Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 05/14] pflash: " Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 06/14] sd: " Eric Blake
2016-05-02 15:35 ` Kevin Wolf
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 07/14] m25p80: " Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 08/14] atapi: " Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 09/14] nbd: " Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 10/14] qemu-img: " Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 11/14] qemu-io: " Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 12/14] block: Switch blk_read_unthrottled() to byte interface Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 13/14] block: Switch blk_write_zeroes() " Eric Blake
2016-04-29 23:21 ` Eric Blake
2016-04-29 20:08 ` [Qemu-devel] [PATCH v4 14/14] block: Kill blk_write(), blk_read() Eric Blake
2016-05-02 7:27 ` [Qemu-devel] [PATCH v4 00/14] block: kill sector-based blk_write/read Kevin Wolf
2016-05-02 14:12 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461960516-4717-4-git-send-email-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).