qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: mst@redhat.com, ehabkost@redhat.com, marcel@redhat.com,
	eblake@redhat.com, armbru@redhat.com, drjones@redhat.com
Subject: [Qemu-devel] [RFC 22/42] pc: piix4: initialize new CPU hotplug hw
Date: Mon,  2 May 2016 14:33:31 +0200	[thread overview]
Message-ID: <1462192431-146342-23-git-send-email-imammedo@redhat.com> (raw)
In-Reply-To: <1462192431-146342-1-git-send-email-imammedo@redhat.com>

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
 hw/acpi/piix4.c      | 51 +++++++++++++++++++++++++++++++++++++++++++++------
 hw/i386/pc_piix.c    |  2 +-
 hw/mips/mips_malta.c |  2 +-
 include/hw/i386/pc.h |  3 ++-
 4 files changed, 49 insertions(+), 9 deletions(-)

diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
index 8f53b30..2246c65 100644
--- a/hw/acpi/piix4.c
+++ b/hw/acpi/piix4.c
@@ -34,6 +34,7 @@
 #include "hw/acpi/piix4.h"
 #include "hw/acpi/pcihp.h"
 #include "hw/acpi/cpu_hotplug.h"
+#include "hw/acpi/cpu.h"
 #include "hw/hotplug.h"
 #include "hw/mem/pc-dimm.h"
 #include "hw/acpi/memory_hotplug.h"
@@ -86,7 +87,10 @@ typedef struct PIIX4PMState {
     uint8_t s4_val;
 
     bool cpu_hotplug_legacy;
-    AcpiCpuHotplug gpe_cpu;
+    union {
+        AcpiCpuHotplug legacy; /* used for keeping legacy state */
+        CPUHotplugState state;
+    } cpuhp;
 
     MemHotplugState acpi_memory_hotplug;
 } PIIX4PMState;
@@ -273,6 +277,24 @@ static const VMStateDescription vmstate_memhp_state = {
     }
 };
 
+static bool vmstate_test_use_cpuhp(void *opaque)
+{
+    PIIX4PMState *s = opaque;
+    return !s->cpu_hotplug_legacy && s->cpuhp.state.is_enabled;
+}
+
+static const VMStateDescription vmstate_cpuhp_state = {
+    .name = "piix4_pm/cpuhp",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .needed = vmstate_test_use_cpuhp,
+    .fields      = (VMStateField[]) {
+        VMSTATE_CPU_HOTPLUG(cpuhp.state, PIIX4PMState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 /* qemu-kvm 1.2 uses version 3 but advertised as 2
  * To support incoming qemu-kvm 1.2 migration, change version_id
  * and minimum_version_id to 2 below (which breaks migration from
@@ -307,6 +329,7 @@ static const VMStateDescription vmstate_acpi = {
     },
     .subsections = (const VMStateDescription*[]) {
          &vmstate_memhp_state,
+         &vmstate_cpuhp_state,
          NULL
     }
 };
@@ -351,9 +374,12 @@ static void piix4_device_plug_cb(HotplugHandler *hotplug_dev,
         acpi_memory_plug_cb(hotplug_dev, &s->acpi_memory_hotplug, dev, errp);
     } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
         acpi_pcihp_device_plug_cb(hotplug_dev, &s->acpi_pci_hotplug, dev, errp);
-    } else if (s->cpu_hotplug_legacy &&
-               object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
-        legacy_acpi_cpu_plug_cb(hotplug_dev, &s->gpe_cpu, dev, errp);
+    } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
+        if (s->cpu_hotplug_legacy) {
+            legacy_acpi_cpu_plug_cb(hotplug_dev, &s->cpuhp.legacy, dev, errp);
+        } else {
+            acpi_cpu_plug_cb(hotplug_dev, &s->cpuhp.state, dev, errp);
+        }
     } else {
         error_setg(errp, "acpi: device plug request for not supported device"
                    " type: %s", object_get_typename(OBJECT(dev)));
@@ -372,6 +398,9 @@ static void piix4_device_unplug_request_cb(HotplugHandler *hotplug_dev,
     } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
         acpi_pcihp_device_unplug_cb(hotplug_dev, &s->acpi_pci_hotplug, dev,
                                     errp);
+    } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU) &&
+               !s->cpu_hotplug_legacy) {
+            acpi_cpu_unplug_request_cb(hotplug_dev, &s->cpuhp.state, dev, errp);
     } else {
         error_setg(errp, "acpi: device unplug request for not supported device"
                    " type: %s", object_get_typename(OBJECT(dev)));
@@ -386,6 +415,9 @@ static void piix4_device_unplug_cb(HotplugHandler *hotplug_dev,
     if (s->acpi_memory_hotplug.is_enabled &&
         object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
         acpi_memory_unplug_cb(&s->acpi_memory_hotplug, dev, errp);
+    } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU) &&
+               !s->cpu_hotplug_legacy) {
+            acpi_cpu_unplug_cb(&s->cpuhp.state, dev, errp);
     } else {
         error_setg(errp, "acpi: device unplug for not supported device"
                    " type: %s", object_get_typename(OBJECT(dev)));
@@ -507,13 +539,15 @@ Object *piix4_pm_find(void)
 
 I2CBus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
                       qemu_irq sci_irq, qemu_irq smi_irq,
-                      int smm_enabled, DeviceState **piix4_pm)
+                      int smm_enabled, DeviceState **piix4_pm,
+                      bool cpuhp_enabled)
 {
     DeviceState *dev;
     PIIX4PMState *s;
 
     dev = DEVICE(pci_create(bus, devfn, TYPE_PIIX4_PM));
     qdev_prop_set_uint32(dev, "smb_io_base", smb_io_base);
+    qdev_prop_set_bit(dev, "cpu-hotplug", cpuhp_enabled);
     if (piix4_pm) {
         *piix4_pm = dev;
     }
@@ -572,8 +606,11 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent,
                     s->use_acpi_pci_hotplug);
 
     if (s->cpu_hotplug_legacy) {
-        legacy_acpi_cpu_hotplug_init(parent, OBJECT(s), &s->gpe_cpu,
+        legacy_acpi_cpu_hotplug_init(parent, OBJECT(s), &s->cpuhp.legacy,
                                      PIIX4_CPU_HOTPLUG_IO_BASE);
+    } else if (s->cpuhp.state.is_enabled) {
+        cpu_hotplug_hw_init(parent, OBJECT(s), &s->cpuhp.state,
+                            PIIX4_CPU_HOTPLUG_IO_BASE);
     }
 
     if (s->acpi_memory_hotplug.is_enabled) {
@@ -606,6 +643,8 @@ static Property piix4_pm_properties[] = {
                      acpi_memory_hotplug.is_enabled, true),
     DEFINE_PROP_BOOL("cpu-hotplug-legacy", PIIX4PMState,
                      cpu_hotplug_legacy, false),
+    DEFINE_PROP_BOOL("cpu-hotplug", PIIX4PMState,
+                     cpuhp.state.is_enabled, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
index cdbdd69..860a83d 100644
--- a/hw/i386/pc_piix.c
+++ b/hw/i386/pc_piix.c
@@ -259,7 +259,7 @@ static void pc_init1(MachineState *machine,
         smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
                               gsi[9], smi_irq,
                               pc_machine_is_smm_enabled(pcms),
-                              &piix4_pm);
+                              &piix4_pm, machine->cpu_hotplug);
         smbus_eeprom_init(smbus, 8, NULL, 0);
 
         object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
diff --git a/hw/mips/mips_malta.c b/hw/mips/mips_malta.c
index fa769e5..3f61e38 100644
--- a/hw/mips/mips_malta.c
+++ b/hw/mips/mips_malta.c
@@ -1208,7 +1208,7 @@ void mips_malta_init(MachineState *machine)
     pci_piix4_ide_init(pci_bus, hd, piix4_devfn + 1);
     pci_create_simple(pci_bus, piix4_devfn + 2, "piix4-usb-uhci");
     smbus = piix4_pm_init(pci_bus, piix4_devfn + 3, 0x1100,
-                          isa_get_irq(NULL, 9), NULL, 0, NULL);
+                          isa_get_irq(NULL, 9), NULL, 0, NULL, NULL);
     smbus_eeprom_init(smbus, 8, smbus_eeprom_buf, smbus_eeprom_size);
     g_free(smbus_eeprom_buf);
     pit = pit_init(isa_bus, 0x40, 0, NULL);
diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index f1e40ae..43aeebb 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -275,7 +275,8 @@ int cmos_get_fd_drive_type(FloppyDriveType fd0);
 
 I2CBus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
                       qemu_irq sci_irq, qemu_irq smi_irq,
-                      int smm_enabled, DeviceState **piix4_pm);
+                      int smm_enabled, DeviceState **piix4_pm,
+                      bool cpuhp_enabled);
 void piix4_smbus_register_device(SMBusDevice *dev, uint8_t addr);
 
 /* hpet.c */
-- 
1.8.3.1

  parent reply	other threads:[~2016-05-02 12:35 UTC|newest]

Thread overview: 66+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-02 12:33 [Qemu-devel] [RFC 00/42] ACPI CPU hotplug refactoring to support more than 255 CPUs and PXM/OST methods Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 01/42] acpi: add aml_debug() Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 02/42] acpi: add aml_refof() Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 03/42] pc: acpi: remove AML for empty/not used GPE handlers Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 04/42] pc: acpi: consolidate CPU hotplug AML Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 05/42] pc: acpi: consolidate \GPE._E02 with the rest of " Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 06/42] pc: acpi: cpu-hotplug: make AML CPU_foo defines local to cpu_hotplug_acpi_table.c Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 07/42] pc: acpi: mark current CPU hotplug functions as legacy Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 08/42] pc: acpi: consolidate legacy CPU hotplug in one file Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 09/42] pc: acpi: simplify build_legacy_cpu_hotplug_aml() signature Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 10/42] pc: piix4/ich9: add 'cpu-hotplug-legacy' property Igor Mammedov
2016-05-10 20:19   ` Eduardo Habkost
2016-05-11 13:33     ` Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 11/42] pc: add 2.7 machine Igor Mammedov
2016-05-10 20:20   ` Eduardo Habkost
2016-05-02 12:33 ` [Qemu-devel] [RFC 12/42] pc: initialize legacy hotplug only for 2.6 and older machine types Igor Mammedov
2016-05-10 20:24   ` Eduardo Habkost
2016-05-11 13:50     ` Igor Mammedov
2016-05-11 21:51       ` Michael S. Tsirkin
2016-05-11 23:28         ` Eduardo Habkost
2016-05-12  7:07           ` Michael S. Tsirkin
2016-05-12 10:29             ` Igor Mammedov
2016-05-12 10:52               ` Eduardo Habkost
2016-05-12 11:04                 ` [Qemu-devel] [libvirt] " Peter Krempa
2016-05-12 13:20                   ` Igor Mammedov
2016-05-12 13:27                     ` Peter Krempa
2016-05-12 14:30                       ` Igor Mammedov
2016-05-11 23:36       ` [Qemu-devel] " Eduardo Habkost
2016-05-12  7:05         ` Michael S. Tsirkin
2016-05-12 10:39           ` Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 13/42] tests: bios-tables-test: update tables with CPHP turned off by default Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 14/42] tests: acpi: check legacy CPU hotplug AML is present for 2.6 machine type Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 15/42] acpi: extend ACPI interface to provide send_event hook Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 16/42] pc: use AcpiDeviceIfClass.send_event to issue GPE events Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 17/42] docs: update ACPI CPU hotplug spec with new protocol Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 18/42] acpi: hardware side of CPU hotplug Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 19/42] pc: add generic CPU unplug callbacks Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 20/42] machine: add cpu-hotplug machine option Igor Mammedov
2016-05-10 20:27   ` Eduardo Habkost
2016-05-11 14:00     ` Igor Mammedov
2016-05-11 15:00       ` Eduardo Habkost
2016-05-02 12:33 ` [Qemu-devel] [RFC 21/42] pc: q35: initialize new CPU hotplug hw Igor Mammedov
2016-05-02 12:33 ` Igor Mammedov [this message]
2016-05-02 12:33 ` [Qemu-devel] [RFC 23/42] tests: pc-cpu-test: turn on cpu-hotplug explicily Igor Mammedov
2016-05-10 20:28   ` Eduardo Habkost
2016-05-02 12:33 ` [Qemu-devel] [RFC 24/42] pc: acpi: cpuhp-legacy: switch ProcessorID to possible_cpus idx Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 25/42] tests: acpi: update cphp_legacy case with new ProcessorID values Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 26/42] pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hook Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 27/42] acpi: add CPU devices AML to DSDT Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 28/42] acpi: add CPU hotplug methods " Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 29/42] tests: acpi: update expected files with new CPU AML description Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 30/42] qdev: hotplug: Introduce HotplugHandler.pre_plug() callback Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 31/42] pc: numa: replace node_cpu indexing by apic_id with possible_cpus index Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 32/42] pc: set X86CPU.node property if QEMU starts with numa enabled Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 33/42] target-i386: add X86CPU.node property Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 34/42] acpi: cpuhp: add command and data registers Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 35/42] acpi: cpuhp: provide cpu._PXM method if running in numa mode Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 36/42] acpi: cpuhp: add cpu._OST handling Igor Mammedov
2016-05-10 21:07   ` Eric Blake
2016-05-11 14:02     ` Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 37/42] tests: acpi: report names of expected files in verbose mode Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 38/42] tests: acpi: add CPU hotplug testcase Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 39/42] tests: acpi: add expected tables for CPU hotplug case Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 40/42] tests: acpi: extend CPU hotplug test with NUMA support Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 41/42] tests: acpi: cpuhp: add expected SRAT tables and update DSDT with _PXM support Igor Mammedov
2016-05-02 12:33 ` [Qemu-devel] [RFC 42/42] DO NOT APPLY: simulate CPU unplug when executin cpu-add on a present CPU Igor Mammedov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462192431-146342-23-git-send-email-imammedo@redhat.com \
    --to=imammedo@redhat.com \
    --cc=armbru@redhat.com \
    --cc=drjones@redhat.com \
    --cc=eblake@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=marcel@redhat.com \
    --cc=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).