qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v5 03/14] nand: Switch to byte-based block access
Date: Tue,  3 May 2016 09:42:35 -0600	[thread overview]
Message-ID: <1462290166-32584-4-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1462290166-32584-1-git-send-email-eblake@redhat.com>

Sector-based blk_write() should die; switch to byte-based
blk_pwrite() instead.  Likewise for blk_read().

This file is doing some complex computations to map various
flash page sizes (256, 512, and 2048) atop generic uses of
512-byte sector operations.  Perhaps someone will want to tidy
up the file for fewer gymnastics in managing addresses and
offsets, and less wasteful visits of 256-byte pages, but it
was out of scope for this series, where I just went with the
mechanical conversion.

Signed-off-by: Eric Blake <eblake@redhat.com>

---
v5: fix missing edit
---
 hw/block/nand.c | 36 +++++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/hw/block/nand.c b/hw/block/nand.c
index 29c6596..c69e675 100644
--- a/hw/block/nand.c
+++ b/hw/block/nand.c
@@ -663,7 +663,8 @@ static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
         sector = SECTOR(s->addr);
         off = (s->addr & PAGE_MASK) + s->offset;
         soff = SECTOR_OFFSET(s->addr);
-        if (blk_read(s->blk, sector, iobuf, PAGE_SECTORS) < 0) {
+        if (blk_pread(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+                      PAGE_SECTORS << BDRV_SECTOR_BITS) < 0) {
             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
             return;
         }
@@ -675,21 +676,24 @@ static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
                             MIN(OOB_SIZE, off + s->iolen - PAGE_SIZE));
         }

-        if (blk_write(s->blk, sector, iobuf, PAGE_SECTORS) < 0) {
+        if (blk_pwrite(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+                       PAGE_SECTORS << BDRV_SECTOR_BITS, 0) < 0) {
             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
         }
     } else {
         off = PAGE_START(s->addr) + (s->addr & PAGE_MASK) + s->offset;
         sector = off >> 9;
         soff = off & 0x1ff;
-        if (blk_read(s->blk, sector, iobuf, PAGE_SECTORS + 2) < 0) {
+        if (blk_pread(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+                      (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS) < 0) {
             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
             return;
         }

         mem_and(iobuf + soff, s->io, s->iolen);

-        if (blk_write(s->blk, sector, iobuf, PAGE_SECTORS + 2) < 0) {
+        if (blk_pwrite(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+                       (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS, 0) < 0) {
             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
         }
     }
@@ -716,17 +720,20 @@ static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
         i = SECTOR(addr);
         page = SECTOR(addr + (1 << (ADDR_SHIFT + s->erase_shift)));
         for (; i < page; i ++)
-            if (blk_write(s->blk, i, iobuf, 1) < 0) {
+            if (blk_pwrite(s->blk, i << BDRV_SECTOR_BITS, iobuf,
+                           BDRV_SECTOR_SIZE, 0) < 0) {
                 printf("%s: write error in sector %" PRIu64 "\n", __func__, i);
             }
     } else {
         addr = PAGE_START(addr);
         page = addr >> 9;
-        if (blk_read(s->blk, page, iobuf, 1) < 0) {
+        if (blk_pread(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+                      BDRV_SECTOR_SIZE) < 0) {
             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
         }
         memset(iobuf + (addr & 0x1ff), 0xff, (~addr & 0x1ff) + 1);
-        if (blk_write(s->blk, page, iobuf, 1) < 0) {
+        if (blk_pwrite(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+                       BDRV_SECTOR_SIZE, 0) < 0) {
             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
         }

@@ -734,18 +741,20 @@ static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
         i = (addr & ~0x1ff) + 0x200;
         for (addr += ((PAGE_SIZE + OOB_SIZE) << s->erase_shift) - 0x200;
                         i < addr; i += 0x200) {
-            if (blk_write(s->blk, i >> 9, iobuf, 1) < 0) {
+            if (blk_pwrite(s->blk, i, iobuf, BDRV_SECTOR_SIZE, 0) < 0) {
                 printf("%s: write error in sector %" PRIu64 "\n",
                        __func__, i >> 9);
             }
         }

         page = i >> 9;
-        if (blk_read(s->blk, page, iobuf, 1) < 0) {
+        if (blk_pread(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+                      BDRV_SECTOR_SIZE) < 0) {
             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
         }
         memset(iobuf, 0xff, ((addr - 1) & 0x1ff) + 1);
-        if (blk_write(s->blk, page, iobuf, 1) < 0) {
+        if (blk_pwrite(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+                       BDRV_SECTOR_SIZE, 0) < 0) {
             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
         }
     }
@@ -760,7 +769,8 @@ static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,

     if (s->blk) {
         if (s->mem_oob) {
-            if (blk_read(s->blk, SECTOR(addr), s->io, PAGE_SECTORS) < 0) {
+            if (blk_pread(s->blk, SECTOR(addr) << BDRV_SECTOR_BITS, s->io,
+                          PAGE_SECTORS << BDRV_SECTOR_BITS) < 0) {
                 printf("%s: read error in sector %" PRIu64 "\n",
                                 __func__, SECTOR(addr));
             }
@@ -769,8 +779,8 @@ static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,
                             OOB_SIZE);
             s->ioaddr = s->io + SECTOR_OFFSET(s->addr) + offset;
         } else {
-            if (blk_read(s->blk, PAGE_START(addr) >> 9,
-                         s->io, (PAGE_SECTORS + 2)) < 0) {
+            if (blk_pread(s->blk, PAGE_START(addr), s->io,
+                          (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS) < 0) {
                 printf("%s: read error in sector %" PRIu64 "\n",
                                 __func__, PAGE_START(addr) >> 9);
             }
-- 
2.5.5

  parent reply	other threads:[~2016-05-03 15:44 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-03 15:42 [Qemu-devel] [PATCH v5 00/14] block: kill sector-based blk_write/read Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 01/14] block: Allow BDRV_REQ_FUA through blk_pwrite() Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 02/14] fdc: Switch to byte-based block access Eric Blake
2016-05-03 15:42 ` Eric Blake [this message]
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 04/14] onenand: " Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 05/14] pflash: " Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 06/14] sd: " Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 07/14] m25p80: " Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 08/14] atapi: " Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 09/14] nbd: " Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 10/14] qemu-img: " Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 11/14] qemu-io: " Eric Blake
2016-05-04 13:10   ` Kevin Wolf
2016-05-04 14:13     ` Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 12/14] block: Switch blk_read_unthrottled() to byte interface Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 13/14] block: Switch blk_write_zeroes() " Eric Blake
2016-05-03 15:42 ` [Qemu-devel] [PATCH v5 14/14] block: Kill blk_write(), blk_read() Eric Blake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462290166-32584-4-git-send-email-eblake@redhat.com \
    --to=eblake@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).