From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v6 11/20] nand: Switch to byte-based block access
Date: Wed, 4 May 2016 17:55:17 -0600 [thread overview]
Message-ID: <1462406126-22946-12-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1462406126-22946-1-git-send-email-eblake@redhat.com>
Sector-based blk_write() should die; switch to byte-based
blk_pwrite() instead. Likewise for blk_read().
This file is doing some complex computations to map various
flash page sizes (256, 512, and 2048) atop generic uses of
512-byte sector operations. Perhaps someone will want to tidy
up the file for fewer gymnastics in managing addresses and
offsets, and less wasteful visits of 256-byte pages, but it
was out of scope for this series, where I just went with the
mechanical conversion.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
v5: fix missing edit
---
hw/block/nand.c | 36 +++++++++++++++++++++++-------------
1 file changed, 23 insertions(+), 13 deletions(-)
diff --git a/hw/block/nand.c b/hw/block/nand.c
index 29c6596..c69e675 100644
--- a/hw/block/nand.c
+++ b/hw/block/nand.c
@@ -663,7 +663,8 @@ static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
sector = SECTOR(s->addr);
off = (s->addr & PAGE_MASK) + s->offset;
soff = SECTOR_OFFSET(s->addr);
- if (blk_read(s->blk, sector, iobuf, PAGE_SECTORS) < 0) {
+ if (blk_pread(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+ PAGE_SECTORS << BDRV_SECTOR_BITS) < 0) {
printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
return;
}
@@ -675,21 +676,24 @@ static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
MIN(OOB_SIZE, off + s->iolen - PAGE_SIZE));
}
- if (blk_write(s->blk, sector, iobuf, PAGE_SECTORS) < 0) {
+ if (blk_pwrite(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+ PAGE_SECTORS << BDRV_SECTOR_BITS, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
}
} else {
off = PAGE_START(s->addr) + (s->addr & PAGE_MASK) + s->offset;
sector = off >> 9;
soff = off & 0x1ff;
- if (blk_read(s->blk, sector, iobuf, PAGE_SECTORS + 2) < 0) {
+ if (blk_pread(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+ (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS) < 0) {
printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
return;
}
mem_and(iobuf + soff, s->io, s->iolen);
- if (blk_write(s->blk, sector, iobuf, PAGE_SECTORS + 2) < 0) {
+ if (blk_pwrite(s->blk, sector << BDRV_SECTOR_BITS, iobuf,
+ (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
}
}
@@ -716,17 +720,20 @@ static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
i = SECTOR(addr);
page = SECTOR(addr + (1 << (ADDR_SHIFT + s->erase_shift)));
for (; i < page; i ++)
- if (blk_write(s->blk, i, iobuf, 1) < 0) {
+ if (blk_pwrite(s->blk, i << BDRV_SECTOR_BITS, iobuf,
+ BDRV_SECTOR_SIZE, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, i);
}
} else {
addr = PAGE_START(addr);
page = addr >> 9;
- if (blk_read(s->blk, page, iobuf, 1) < 0) {
+ if (blk_pread(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+ BDRV_SECTOR_SIZE) < 0) {
printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
}
memset(iobuf + (addr & 0x1ff), 0xff, (~addr & 0x1ff) + 1);
- if (blk_write(s->blk, page, iobuf, 1) < 0) {
+ if (blk_pwrite(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+ BDRV_SECTOR_SIZE, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
}
@@ -734,18 +741,20 @@ static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
i = (addr & ~0x1ff) + 0x200;
for (addr += ((PAGE_SIZE + OOB_SIZE) << s->erase_shift) - 0x200;
i < addr; i += 0x200) {
- if (blk_write(s->blk, i >> 9, iobuf, 1) < 0) {
+ if (blk_pwrite(s->blk, i, iobuf, BDRV_SECTOR_SIZE, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n",
__func__, i >> 9);
}
}
page = i >> 9;
- if (blk_read(s->blk, page, iobuf, 1) < 0) {
+ if (blk_pread(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+ BDRV_SECTOR_SIZE) < 0) {
printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
}
memset(iobuf, 0xff, ((addr - 1) & 0x1ff) + 1);
- if (blk_write(s->blk, page, iobuf, 1) < 0) {
+ if (blk_pwrite(s->blk, page << BDRV_SECTOR_BITS, iobuf,
+ BDRV_SECTOR_SIZE, 0) < 0) {
printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
}
}
@@ -760,7 +769,8 @@ static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,
if (s->blk) {
if (s->mem_oob) {
- if (blk_read(s->blk, SECTOR(addr), s->io, PAGE_SECTORS) < 0) {
+ if (blk_pread(s->blk, SECTOR(addr) << BDRV_SECTOR_BITS, s->io,
+ PAGE_SECTORS << BDRV_SECTOR_BITS) < 0) {
printf("%s: read error in sector %" PRIu64 "\n",
__func__, SECTOR(addr));
}
@@ -769,8 +779,8 @@ static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,
OOB_SIZE);
s->ioaddr = s->io + SECTOR_OFFSET(s->addr) + offset;
} else {
- if (blk_read(s->blk, PAGE_START(addr) >> 9,
- s->io, (PAGE_SECTORS + 2)) < 0) {
+ if (blk_pread(s->blk, PAGE_START(addr), s->io,
+ (PAGE_SECTORS + 2) << BDRV_SECTOR_BITS) < 0) {
printf("%s: read error in sector %" PRIu64 "\n",
__func__, PAGE_START(addr) >> 9);
}
--
2.5.5
next prev parent reply other threads:[~2016-05-04 23:57 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-04 23:55 [Qemu-devel] [PATCH v6 00/20] block: kill sector-based blk_write/read Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 01/20] block: Allow BDRV_REQ_FUA through blk_pwrite() Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 02/20] block: Drop private ioctl-only members of BlockRequest Eric Blake
2016-05-06 10:37 ` Kevin Wolf
2016-05-06 12:23 ` Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 03/20] block: Switch blk_read_unthrottled() to byte interface Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 04/20] block: Switch blk_*write_zeroes() " Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 05/20] block: Introduce byte-based aio read/write Eric Blake
2016-05-06 12:31 ` Kevin Wolf
2016-05-06 14:12 ` Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 06/20] ide: Switch to byte-based aio block access Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 07/20] scsi-disk: " Eric Blake
2016-05-06 12:50 ` Kevin Wolf
2016-05-06 14:18 ` Eric Blake
2016-05-06 14:49 ` Kevin Wolf
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 08/20] virtio: " Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 09/20] xen_disk: " Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 10/20] fdc: Switch to byte-based " Eric Blake
2016-05-04 23:55 ` Eric Blake [this message]
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 12/20] onenand: " Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 13/20] pflash: " Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 14/20] sd: " Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 15/20] m25p80: " Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 16/20] atapi: " Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 17/20] nbd: " Eric Blake
2016-05-06 13:08 ` Kevin Wolf
2016-05-06 14:19 ` Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 18/20] qemu-img: " Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 19/20] qemu-io: " Eric Blake
2016-05-04 23:55 ` [Qemu-devel] [PATCH v6 20/20] block: Kill unused sector-based blk_* functions Eric Blake
2016-05-06 13:11 ` [Qemu-devel] [PATCH v6 00/20] block: kill sector-based blk_write/read Kevin Wolf
2016-05-06 14:20 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462406126-22946-12-git-send-email-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).