From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, pbonzini@redhat.com, alex@alex.org.uk
Subject: [Qemu-devel] [PATCH v4 03/11] nbd: Quit server after any write error
Date: Wed, 11 May 2016 16:39:36 -0600 [thread overview]
Message-ID: <1463006384-7734-4-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1463006384-7734-1-git-send-email-eblake@redhat.com>
We should never ignore failure from nbd_negotiate_send_rep(); if
we are unable to write to the client, then it is not worth trying
to continue the negotiation. Fortunately, the problem is not
too severe - chances are that the errors being ignored here (mainly
inability to write the reply to the client) are indications of
a closed connection or something similar, which will also affect
the next attempt to interact with the client and eventually reach
a point where the errors are detected to end the loop.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
nbd/server.c | 32 +++++++++++++++++++++++---------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/nbd/server.c b/nbd/server.c
index fb6d3ce..53507c5 100644
--- a/nbd/server.c
+++ b/nbd/server.c
@@ -334,7 +334,10 @@ static QIOChannel *nbd_negotiate_handle_starttls(NBDClient *client,
return NULL;
}
- nbd_negotiate_send_rep(client->ioc, NBD_REP_ACK, NBD_OPT_STARTTLS);
+ if (nbd_negotiate_send_rep(client->ioc, NBD_REP_ACK,
+ NBD_OPT_STARTTLS) < 0) {
+ return NULL;
+ }
tioc = qio_channel_tls_new_server(ioc,
client->tlscreds,
@@ -460,8 +463,11 @@ static int nbd_negotiate_options(NBDClient *client)
if (nbd_negotiate_drop_sync(client->ioc, length) != length) {
return -EIO;
}
- nbd_negotiate_send_rep(client->ioc, NBD_REP_ERR_TLS_REQD,
- clientflags);
+ ret = nbd_negotiate_send_rep(client->ioc, NBD_REP_ERR_TLS_REQD,
+ clientflags);
+ if (ret < 0) {
+ return ret;
+ }
break;
}
} else if (fixedNewstyle) {
@@ -485,12 +491,17 @@ static int nbd_negotiate_options(NBDClient *client)
}
if (client->tlscreds) {
TRACE("TLS already enabled");
- nbd_negotiate_send_rep(client->ioc, NBD_REP_ERR_INVALID,
- clientflags);
+ ret = nbd_negotiate_send_rep(client->ioc,
+ NBD_REP_ERR_INVALID,
+ clientflags);
} else {
TRACE("TLS not configured");
- nbd_negotiate_send_rep(client->ioc, NBD_REP_ERR_POLICY,
- clientflags);
+ ret = nbd_negotiate_send_rep(client->ioc,
+ NBD_REP_ERR_POLICY,
+ clientflags);
+ }
+ if (ret < 0) {
+ return ret;
}
break;
default:
@@ -498,8 +509,11 @@ static int nbd_negotiate_options(NBDClient *client)
if (nbd_negotiate_drop_sync(client->ioc, length) != length) {
return -EIO;
}
- nbd_negotiate_send_rep(client->ioc, NBD_REP_ERR_UNSUP,
- clientflags);
+ ret = nbd_negotiate_send_rep(client->ioc, NBD_REP_ERR_UNSUP,
+ clientflags);
+ if (ret < 0) {
+ return ret;
+ }
break;
}
} else {
--
2.5.5
next prev parent reply other threads:[~2016-05-11 22:40 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 22:39 [Qemu-devel] [PATCH v4 00/11] nbd: tighter protocol compliance Eric Blake
2016-05-11 22:39 ` [Qemu-devel] [PATCH v4 01/11] nbd: Use BDRV_REQ_FUA for better FUA where supported Eric Blake
2016-05-11 22:39 ` [Qemu-devel] [PATCH v4 02/11] nbd: More debug typo fixes, use correct formats Eric Blake
2016-06-13 12:04 ` Paolo Bonzini
2016-06-13 12:21 ` Eric Blake
2016-05-11 22:39 ` Eric Blake [this message]
2016-05-11 22:39 ` [Qemu-devel] [PATCH v4 04/11] nbd: Improve server handling of bogus commands Eric Blake
2016-06-13 12:10 ` Paolo Bonzini
2016-06-13 12:25 ` Eric Blake
2016-06-13 21:41 ` Alex Bligh
2016-06-14 13:32 ` Paolo Bonzini
2016-06-14 15:02 ` Alex Bligh
2016-06-14 15:11 ` Paolo Bonzini
2016-06-14 15:59 ` Alex Bligh
2016-06-14 22:05 ` Paolo Bonzini
2016-06-15 7:05 ` [Qemu-devel] [Nbd] " Wouter Verhelst
2016-06-15 8:03 ` Wouter Verhelst
2016-06-15 8:52 ` Alex Bligh
2016-06-15 9:18 ` Paolo Bonzini
2016-06-15 10:27 ` Alex Bligh
2016-06-15 10:34 ` Paolo Bonzini
2016-06-15 12:13 ` Wouter Verhelst
2016-06-15 7:02 ` Wouter Verhelst
2016-06-13 12:19 ` [Qemu-devel] " Paolo Bonzini
2016-06-13 16:54 ` Eric Blake
2016-06-14 18:24 ` Eric Blake
2016-05-11 22:39 ` [Qemu-devel] [PATCH v4 05/11] nbd: Reject unknown request flags Eric Blake
2016-05-11 22:39 ` [Qemu-devel] [PATCH v4 06/11] nbd: Group all Linux-specific ioctl code in one place Eric Blake
2016-05-11 22:39 ` [Qemu-devel] [PATCH v4 07/11] nbd: Clean up ioctl handling of qemu-nbd -c Eric Blake
2016-05-11 22:39 ` [Qemu-devel] [PATCH v4 08/11] nbd: Limit nbdflags to 16 bits Eric Blake
2016-05-11 22:39 ` [Qemu-devel] [PATCH v4 09/11] nbd: Add qemu-nbd -D for human-readable description Eric Blake
2016-05-12 7:47 ` Daniel P. Berrange
2016-05-12 15:38 ` Eric Blake
2016-05-12 15:51 ` Daniel P. Berrange
2016-05-11 22:39 ` [Qemu-devel] [PATCH v4 10/11] nbd: Detect servers that send unexpected error values Eric Blake
2016-05-11 22:39 ` [Qemu-devel] [PATCH v4 11/11] nbd: Avoid magic number for NBD max name size Eric Blake
2016-05-12 16:04 ` [Qemu-devel] [PATCH v4 00/11] nbd: tighter protocol compliance Alex Bligh
2016-06-01 23:02 ` Eric Blake
2016-06-13 16:28 ` Paolo Bonzini
2016-06-13 16:49 ` Eric Blake
2016-06-14 16:31 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463006384-7734-4-git-send-email-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=alex@alex.org.uk \
--cc=pbonzini@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).