qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 09/69] block: Introduce bdrv_driver_pwritev()
Date: Thu, 12 May 2016 16:34:49 +0200	[thread overview]
Message-ID: <1463063749-2201-10-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1463063749-2201-1-git-send-email-kwolf@redhat.com>

This is a function that simply calls into the block driver for doing a
write, providing the byte granularity interface we want to eventually
have everywhere, and using whatever interface that driver supports.

This one is a bit more interesting than the version for reads: It adds
support for .bdrv_co_writev_flags() everywhere, so that drivers
implementing this function can drop .bdrv_co_writev() now.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
 block/io.c      | 51 ++++++++++++++++++++++++++++++++++++---------------
 block/iscsi.c   |  8 --------
 block/nbd.c     |  9 ---------
 block/raw_bsd.c |  8 --------
 4 files changed, 36 insertions(+), 40 deletions(-)

diff --git a/block/io.c b/block/io.c
index d3617fe..53b4f2c 100644
--- a/block/io.c
+++ b/block/io.c
@@ -812,6 +812,36 @@ static int coroutine_fn bdrv_driver_preadv(BlockDriverState *bs,
     return drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
 }
 
+static int coroutine_fn bdrv_driver_pwritev(BlockDriverState *bs,
+                                            uint64_t offset, uint64_t bytes,
+                                            QEMUIOVector *qiov, int flags)
+{
+    BlockDriver *drv = bs->drv;
+    int64_t sector_num = offset >> BDRV_SECTOR_BITS;
+    unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
+    int ret;
+
+    assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
+    assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
+    assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
+
+    if (drv->bdrv_co_writev_flags) {
+        ret = drv->bdrv_co_writev_flags(bs, sector_num, nb_sectors, qiov,
+                                        flags);
+    } else {
+        assert(drv->supported_write_flags == 0);
+        ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
+    }
+
+    if (ret == 0 && (flags & BDRV_REQ_FUA) &&
+        !(drv->supported_write_flags & BDRV_REQ_FUA))
+    {
+        ret = bdrv_co_flush(bs);
+    }
+
+    return ret;
+}
+
 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
         int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
 {
@@ -863,8 +893,9 @@ static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
         /* This does not change the data on the disk, it is not necessary
          * to flush even in cache=writethrough mode.
          */
-        ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
-                                  &bounce_qiov);
+        ret = bdrv_driver_pwritev(bs, cluster_sector_num * BDRV_SECTOR_SIZE,
+                                  cluster_nb_sectors * BDRV_SECTOR_SIZE,
+                                  &bounce_qiov, 0);
     }
 
     if (ret < 0) {
@@ -1152,7 +1183,8 @@ static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
             }
             qemu_iovec_init_external(&qiov, &iov, 1);
 
-            ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
+            ret = bdrv_driver_pwritev(bs, sector_num * BDRV_SECTOR_SIZE,
+                                      num * BDRV_SECTOR_SIZE, &qiov, 0);
 
             /* Keep bounce buffer around if it is big enough for all
              * all future requests.
@@ -1212,23 +1244,12 @@ static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
     } else if (flags & BDRV_REQ_ZERO_WRITE) {
         bdrv_debug_event(bs, BLKDBG_PWRITEV_ZERO);
         ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
-    } else if (drv->bdrv_co_writev_flags) {
-        bdrv_debug_event(bs, BLKDBG_PWRITEV);
-        ret = drv->bdrv_co_writev_flags(bs, sector_num, nb_sectors, qiov,
-                                        flags);
     } else {
-        assert(drv->supported_write_flags == 0);
         bdrv_debug_event(bs, BLKDBG_PWRITEV);
-        ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
+        ret = bdrv_driver_pwritev(bs, offset, bytes, qiov, flags);
     }
     bdrv_debug_event(bs, BLKDBG_PWRITEV_DONE);
 
-    if (ret == 0 && (flags & BDRV_REQ_FUA) &&
-        !(drv->supported_write_flags & BDRV_REQ_FUA))
-    {
-        ret = bdrv_co_flush(bs);
-    }
-
     bdrv_set_dirty(bs, sector_num, nb_sectors);
 
     if (bs->wr_highest_offset < offset + bytes) {
diff --git a/block/iscsi.c b/block/iscsi.c
index 302baf8..4f75204 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -513,13 +513,6 @@ retry:
     return 0;
 }
 
-static int coroutine_fn
-iscsi_co_writev(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
-                QEMUIOVector *iov)
-{
-    return iscsi_co_writev_flags(bs, sector_num, nb_sectors, iov, 0);
-}
-
 
 static bool iscsi_allocationmap_is_allocated(IscsiLun *iscsilun,
                                              int64_t sector_num, int nb_sectors)
@@ -1847,7 +1840,6 @@ static BlockDriver bdrv_iscsi = {
     .bdrv_co_discard      = iscsi_co_discard,
     .bdrv_co_write_zeroes = iscsi_co_write_zeroes,
     .bdrv_co_readv         = iscsi_co_readv,
-    .bdrv_co_writev        = iscsi_co_writev,
     .bdrv_co_writev_flags  = iscsi_co_writev_flags,
     .supported_write_flags = BDRV_REQ_FUA,
     .bdrv_co_flush_to_disk = iscsi_co_flush,
diff --git a/block/nbd.c b/block/nbd.c
index f7ea3b3..fccbfef 100644
--- a/block/nbd.c
+++ b/block/nbd.c
@@ -374,12 +374,6 @@ static int nbd_co_writev_flags(BlockDriverState *bs, int64_t sector_num,
     return ret;
 }
 
-static int nbd_co_writev(BlockDriverState *bs, int64_t sector_num,
-                         int nb_sectors, QEMUIOVector *qiov)
-{
-    return nbd_co_writev_flags(bs, sector_num, nb_sectors, qiov, 0);
-}
-
 static int nbd_co_flush(BlockDriverState *bs)
 {
     return nbd_client_co_flush(bs);
@@ -476,7 +470,6 @@ static BlockDriver bdrv_nbd = {
     .bdrv_parse_filename        = nbd_parse_filename,
     .bdrv_file_open             = nbd_open,
     .bdrv_co_readv              = nbd_co_readv,
-    .bdrv_co_writev             = nbd_co_writev,
     .bdrv_co_writev_flags       = nbd_co_writev_flags,
     .supported_write_flags      = BDRV_REQ_FUA,
     .bdrv_close                 = nbd_close,
@@ -496,7 +489,6 @@ static BlockDriver bdrv_nbd_tcp = {
     .bdrv_parse_filename        = nbd_parse_filename,
     .bdrv_file_open             = nbd_open,
     .bdrv_co_readv              = nbd_co_readv,
-    .bdrv_co_writev             = nbd_co_writev,
     .bdrv_co_writev_flags       = nbd_co_writev_flags,
     .supported_write_flags      = BDRV_REQ_FUA,
     .bdrv_close                 = nbd_close,
@@ -516,7 +508,6 @@ static BlockDriver bdrv_nbd_unix = {
     .bdrv_parse_filename        = nbd_parse_filename,
     .bdrv_file_open             = nbd_open,
     .bdrv_co_readv              = nbd_co_readv,
-    .bdrv_co_writev             = nbd_co_writev,
     .bdrv_co_writev_flags       = nbd_co_writev_flags,
     .supported_write_flags      = BDRV_REQ_FUA,
     .bdrv_close                 = nbd_close,
diff --git a/block/raw_bsd.c b/block/raw_bsd.c
index a6cc7e9..9c9d39b 100644
--- a/block/raw_bsd.c
+++ b/block/raw_bsd.c
@@ -116,13 +116,6 @@ fail:
     return ret;
 }
 
-static int coroutine_fn
-raw_co_writev(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
-              QEMUIOVector *qiov)
-{
-    return raw_co_writev_flags(bs, sector_num, nb_sectors, qiov, 0);
-}
-
 static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
                                             int64_t sector_num,
                                             int nb_sectors, int *pnum,
@@ -256,7 +249,6 @@ BlockDriver bdrv_raw = {
     .bdrv_close           = &raw_close,
     .bdrv_create          = &raw_create,
     .bdrv_co_readv        = &raw_co_readv,
-    .bdrv_co_writev       = &raw_co_writev,
     .bdrv_co_writev_flags = &raw_co_writev_flags,
     .supported_write_flags = BDRV_REQ_FUA,
     .bdrv_co_write_zeroes = &raw_co_write_zeroes,
-- 
1.8.3.1

  parent reply	other threads:[~2016-05-12 14:36 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-12 14:34 [Qemu-devel] [PULL 00/69] Block layer patches Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 01/69] block: Don't disable I/O throttling on sync requests Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 02/69] block: make bdrv_start_throttled_reqs return void Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 03/69] block: move restarting of throttled reqs to block/throttle-groups.c Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 04/69] block: extract bdrv_drain_poll/bdrv_co_yield_to_drain from bdrv_drain/bdrv_co_drain Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 05/69] block: introduce bdrv_no_throttling_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 06/69] block: plug whole tree at once, introduce bdrv_io_unplugged_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 07/69] linux-aio: make it more type safe Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 08/69] block: Introduce bdrv_driver_preadv() Kevin Wolf
2016-05-12 14:34 ` Kevin Wolf [this message]
2016-05-12 14:34 ` [Qemu-devel] [PULL 10/69] block: Support AIO drivers in bdrv_driver_preadv/pwritev() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 11/69] block: Rename bdrv_co_do_preadv/writev to bdrv_co_preadv/writev Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 12/69] block: Introduce .bdrv_co_preadv/pwritev BlockDriver function Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 13/69] bochs: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 14/69] cloop: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 15/69] dmg: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 16/69] vdi: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 17/69] vdi: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 18/69] vmdk: Add vmdk_find_offset_in_cluster() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 19/69] vmdk: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 20/69] vmdk: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 21/69] vpc: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 22/69] vpc: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 23/69] vvfat: Implement .bdrv_co_preadv/pwritev interfaces Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 24/69] block: Remove BlockDriver.bdrv_read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 25/69] block: Fix typo in comment Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 26/69] block: always compile-check debug prints Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 27/69] Allow users to specify the vmdk virtual hardware version Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 28/69] qemu-io: Fix memory leak in 'aio_write -z' Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 29/69] block: Allow BDRV_REQ_FUA through blk_pwrite() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 30/69] block: Switch blk_read_unthrottled() to byte interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 31/69] block: Switch blk_*write_zeroes() " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 32/69] block: Introduce byte-based aio read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 33/69] ide: Switch to byte-based aio block access Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 34/69] scsi-disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 35/69] virtio: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 36/69] xen_disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 37/69] fdc: Switch to byte-based " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 38/69] nand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 39/69] onenand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 40/69] pflash: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 41/69] sd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 42/69] m25p80: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 43/69] atapi: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 44/69] nbd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 45/69] qemu-img: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 46/69] qemu-io: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 47/69] block: Kill unused sector-based blk_* functions Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 48/69] qcow2: improve qcow2_co_write_zeroes() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 49/69] block: Make supported_write_flags a per-bds property Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 50/69] block: Honor BDRV_REQ_FUA during write_zeroes Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 51/69] nbd: Simplify client FUA handling Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 52/69] block: Invalidate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 53/69] block: Drop superfluous invalidating bs->file from drivers Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 54/69] block: Inactivate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 55/69] iotests: fix the redirection order in 083 Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 56/69] qemu-img: check block status of backing file when converting Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 57/69] Add new block driver interface to add/delete a BDS's child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 58/69] quorum: implement bdrv_add_child() and bdrv_del_child() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 59/69] qmp: add monitor command to add/remove a child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 60/69] qemu-io: Add missing option documentation Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 61/69] qemu-io: Make 'open' subcommand more like command line Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 62/69] qemu-io: Use bool for command line flags Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 63/69] qemu-io: Allow unaligned access by default Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 64/69] qemu-io: Add 'write -f' to test FUA flag Kevin Wolf
2016-05-12 21:23   ` Eric Blake
2016-05-12 14:35 ` [Qemu-devel] [PULL 65/69] qemu-io: Add 'write -z -u' to test MAY_UNMAP flag Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 66/69] block: add support for --image-opts in block I/O tests Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 67/69] block: add support for encryption secrets " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 68/69] block: enable testing of LUKS driver with " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 69/69] qemu-iotests: iotests: fail hard if not run via "check" Kevin Wolf
2016-05-12 16:19 ` [Qemu-devel] [PULL 00/69] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463063749-2201-10-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).