From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 33/69] ide: Switch to byte-based aio block access
Date: Thu, 12 May 2016 16:35:13 +0200 [thread overview]
Message-ID: <1463063749-2201-34-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1463063749-2201-1-git-send-email-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
Sector-based blk_aio_readv() and blk_aio_writev() should die; switch
to byte-based blk_aio_preadv() and blk_aio_pwritev() instead.
The patch had to touch multiple files at once, because dma_blk_io()
takes pointers to the functions, and ide_issue_trim() piggybacks on
the same interface (while ignoring offset under the hood).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
dma-helpers.c | 14 +++++++-------
hw/ide/core.c | 10 +++++-----
hw/ide/internal.h | 2 +-
hw/ide/macio.c | 9 +++------
include/sysemu/dma.h | 4 ++--
5 files changed, 18 insertions(+), 21 deletions(-)
diff --git a/dma-helpers.c b/dma-helpers.c
index 4ad0bca..a6cc15f 100644
--- a/dma-helpers.c
+++ b/dma-helpers.c
@@ -73,7 +73,7 @@ typedef struct {
BlockBackend *blk;
BlockAIOCB *acb;
QEMUSGList *sg;
- uint64_t sector_num;
+ uint64_t offset;
DMADirection dir;
int sg_cur_index;
dma_addr_t sg_cur_byte;
@@ -130,7 +130,7 @@ static void dma_blk_cb(void *opaque, int ret)
trace_dma_blk_cb(dbs, ret);
dbs->acb = NULL;
- dbs->sector_num += dbs->iov.size / 512;
+ dbs->offset += dbs->iov.size;
if (dbs->sg_cur_index == dbs->sg->nsg || ret < 0) {
dma_complete(dbs, ret);
@@ -164,8 +164,8 @@ static void dma_blk_cb(void *opaque, int ret)
qemu_iovec_discard_back(&dbs->iov, dbs->iov.size & ~BDRV_SECTOR_MASK);
}
- dbs->acb = dbs->io_func(dbs->blk, dbs->sector_num, &dbs->iov,
- dbs->iov.size / 512, dma_blk_cb, dbs);
+ dbs->acb = dbs->io_func(dbs->blk, dbs->offset, &dbs->iov, 0,
+ dma_blk_cb, dbs);
assert(dbs->acb);
}
@@ -203,7 +203,7 @@ BlockAIOCB *dma_blk_io(
dbs->acb = NULL;
dbs->blk = blk;
dbs->sg = sg;
- dbs->sector_num = sector_num;
+ dbs->offset = sector_num << BDRV_SECTOR_BITS;
dbs->sg_cur_index = 0;
dbs->sg_cur_byte = 0;
dbs->dir = dir;
@@ -219,7 +219,7 @@ BlockAIOCB *dma_blk_read(BlockBackend *blk,
QEMUSGList *sg, uint64_t sector,
void (*cb)(void *opaque, int ret), void *opaque)
{
- return dma_blk_io(blk, sg, sector, blk_aio_readv, cb, opaque,
+ return dma_blk_io(blk, sg, sector, blk_aio_preadv, cb, opaque,
DMA_DIRECTION_FROM_DEVICE);
}
@@ -227,7 +227,7 @@ BlockAIOCB *dma_blk_write(BlockBackend *blk,
QEMUSGList *sg, uint64_t sector,
void (*cb)(void *opaque, int ret), void *opaque)
{
- return dma_blk_io(blk, sg, sector, blk_aio_writev, cb, opaque,
+ return dma_blk_io(blk, sg, sector, blk_aio_pwritev, cb, opaque,
DMA_DIRECTION_TO_DEVICE);
}
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 41e6a2d..fe2bfba 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -442,7 +442,7 @@ static void ide_issue_trim_cb(void *opaque, int ret)
}
BlockAIOCB *ide_issue_trim(BlockBackend *blk,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
+ int64_t offset, QEMUIOVector *qiov, BdrvRequestFlags flags,
BlockCompletionFunc *cb, void *opaque)
{
TrimAIOCB *iocb;
@@ -616,8 +616,8 @@ BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num,
req->iov.iov_len = iov->size;
qemu_iovec_init_external(&req->qiov, &req->iov, 1);
- aioreq = blk_aio_readv(s->blk, sector_num, &req->qiov, nb_sectors,
- ide_buffered_readv_cb, req);
+ aioreq = blk_aio_preadv(s->blk, sector_num << BDRV_SECTOR_BITS,
+ &req->qiov, 0, ide_buffered_readv_cb, req);
QLIST_INSERT_HEAD(&s->buffered_requests, req, list);
return aioreq;
@@ -1006,8 +1006,8 @@ static void ide_sector_write(IDEState *s)
block_acct_start(blk_get_stats(s->blk), &s->acct,
n * BDRV_SECTOR_SIZE, BLOCK_ACCT_WRITE);
- s->pio_aiocb = blk_aio_writev(s->blk, sector_num, &s->qiov, n,
- ide_sector_write_cb, s);
+ s->pio_aiocb = blk_aio_pwritev(s->blk, sector_num << BDRV_SECTOR_BITS,
+ &s->qiov, 0, ide_sector_write_cb, s);
}
static void ide_flush_cb(void *opaque, int ret)
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index d2c458f..ceb9e59 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -614,7 +614,7 @@ void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
void ide_transfer_stop(IDEState *s);
void ide_set_inactive(IDEState *s, bool more);
BlockAIOCB *ide_issue_trim(BlockBackend *blk,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
+ int64_t offset, QEMUIOVector *qiov, BdrvRequestFlags flags,
BlockCompletionFunc *cb, void *opaque);
BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num,
QEMUIOVector *iov, int nb_sectors,
diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index ae29b6f..d7d9c0f 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -120,8 +120,7 @@ static void pmac_dma_read(BlockBackend *blk,
MACIO_DPRINTF("--- Block read transfer - sector_num: %" PRIx64 " "
"nsector: %x\n", (offset >> 9), (bytes >> 9));
- s->bus->dma->aiocb = blk_aio_readv(blk, (offset >> 9), &io->iov,
- (bytes >> 9), cb, io);
+ s->bus->dma->aiocb = blk_aio_preadv(blk, offset, &io->iov, 0, cb, io);
}
static void pmac_dma_write(BlockBackend *blk,
@@ -205,8 +204,7 @@ static void pmac_dma_write(BlockBackend *blk,
MACIO_DPRINTF("--- Block write transfer - sector_num: %" PRIx64 " "
"nsector: %x\n", (offset >> 9), (bytes >> 9));
- s->bus->dma->aiocb = blk_aio_writev(blk, (offset >> 9), &io->iov,
- (bytes >> 9), cb, io);
+ s->bus->dma->aiocb = blk_aio_pwritev(blk, offset, &io->iov, 0, cb, io);
}
static void pmac_dma_trim(BlockBackend *blk,
@@ -232,8 +230,7 @@ static void pmac_dma_trim(BlockBackend *blk,
s->io_buffer_index += io->len;
io->len = 0;
- s->bus->dma->aiocb = ide_issue_trim(blk, (offset >> 9), &io->iov,
- (bytes >> 9), cb, io);
+ s->bus->dma->aiocb = ide_issue_trim(blk, offset, &io->iov, 0, cb, io);
}
static void pmac_ide_atapi_transfer_cb(void *opaque, int ret)
diff --git a/include/sysemu/dma.h b/include/sysemu/dma.h
index b0fbb9b..0f7cd4d 100644
--- a/include/sysemu/dma.h
+++ b/include/sysemu/dma.h
@@ -197,8 +197,8 @@ void qemu_sglist_add(QEMUSGList *qsg, dma_addr_t base, dma_addr_t len);
void qemu_sglist_destroy(QEMUSGList *qsg);
#endif
-typedef BlockAIOCB *DMAIOFunc(BlockBackend *blk, int64_t sector_num,
- QEMUIOVector *iov, int nb_sectors,
+typedef BlockAIOCB *DMAIOFunc(BlockBackend *blk, int64_t offset,
+ QEMUIOVector *iov, BdrvRequestFlags flags,
BlockCompletionFunc *cb, void *opaque);
BlockAIOCB *dma_blk_io(BlockBackend *blk,
--
1.8.3.1
next prev parent reply other threads:[~2016-05-12 14:36 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-12 14:34 [Qemu-devel] [PULL 00/69] Block layer patches Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 01/69] block: Don't disable I/O throttling on sync requests Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 02/69] block: make bdrv_start_throttled_reqs return void Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 03/69] block: move restarting of throttled reqs to block/throttle-groups.c Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 04/69] block: extract bdrv_drain_poll/bdrv_co_yield_to_drain from bdrv_drain/bdrv_co_drain Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 05/69] block: introduce bdrv_no_throttling_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 06/69] block: plug whole tree at once, introduce bdrv_io_unplugged_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 07/69] linux-aio: make it more type safe Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 08/69] block: Introduce bdrv_driver_preadv() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 09/69] block: Introduce bdrv_driver_pwritev() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 10/69] block: Support AIO drivers in bdrv_driver_preadv/pwritev() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 11/69] block: Rename bdrv_co_do_preadv/writev to bdrv_co_preadv/writev Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 12/69] block: Introduce .bdrv_co_preadv/pwritev BlockDriver function Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 13/69] bochs: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 14/69] cloop: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 15/69] dmg: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 16/69] vdi: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 17/69] vdi: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 18/69] vmdk: Add vmdk_find_offset_in_cluster() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 19/69] vmdk: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 20/69] vmdk: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 21/69] vpc: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 22/69] vpc: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 23/69] vvfat: Implement .bdrv_co_preadv/pwritev interfaces Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 24/69] block: Remove BlockDriver.bdrv_read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 25/69] block: Fix typo in comment Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 26/69] block: always compile-check debug prints Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 27/69] Allow users to specify the vmdk virtual hardware version Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 28/69] qemu-io: Fix memory leak in 'aio_write -z' Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 29/69] block: Allow BDRV_REQ_FUA through blk_pwrite() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 30/69] block: Switch blk_read_unthrottled() to byte interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 31/69] block: Switch blk_*write_zeroes() " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 32/69] block: Introduce byte-based aio read/write Kevin Wolf
2016-05-12 14:35 ` Kevin Wolf [this message]
2016-05-12 14:35 ` [Qemu-devel] [PULL 34/69] scsi-disk: Switch to byte-based aio block access Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 35/69] virtio: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 36/69] xen_disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 37/69] fdc: Switch to byte-based " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 38/69] nand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 39/69] onenand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 40/69] pflash: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 41/69] sd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 42/69] m25p80: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 43/69] atapi: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 44/69] nbd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 45/69] qemu-img: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 46/69] qemu-io: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 47/69] block: Kill unused sector-based blk_* functions Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 48/69] qcow2: improve qcow2_co_write_zeroes() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 49/69] block: Make supported_write_flags a per-bds property Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 50/69] block: Honor BDRV_REQ_FUA during write_zeroes Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 51/69] nbd: Simplify client FUA handling Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 52/69] block: Invalidate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 53/69] block: Drop superfluous invalidating bs->file from drivers Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 54/69] block: Inactivate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 55/69] iotests: fix the redirection order in 083 Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 56/69] qemu-img: check block status of backing file when converting Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 57/69] Add new block driver interface to add/delete a BDS's child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 58/69] quorum: implement bdrv_add_child() and bdrv_del_child() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 59/69] qmp: add monitor command to add/remove a child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 60/69] qemu-io: Add missing option documentation Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 61/69] qemu-io: Make 'open' subcommand more like command line Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 62/69] qemu-io: Use bool for command line flags Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 63/69] qemu-io: Allow unaligned access by default Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 64/69] qemu-io: Add 'write -f' to test FUA flag Kevin Wolf
2016-05-12 21:23 ` Eric Blake
2016-05-12 14:35 ` [Qemu-devel] [PULL 65/69] qemu-io: Add 'write -z -u' to test MAY_UNMAP flag Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 66/69] block: add support for --image-opts in block I/O tests Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 67/69] block: add support for encryption secrets " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 68/69] block: enable testing of LUKS driver with " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 69/69] qemu-iotests: iotests: fail hard if not run via "check" Kevin Wolf
2016-05-12 16:19 ` [Qemu-devel] [PULL 00/69] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463063749-2201-34-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).