From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 45/69] qemu-img: Switch to byte-based block access
Date: Thu, 12 May 2016 16:35:25 +0200 [thread overview]
Message-ID: <1463063749-2201-46-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1463063749-2201-1-git-send-email-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
Sector-based blk_write() should die; switch to byte-based
blk_pwrite() instead. Likewise for blk_read().
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
qemu-img.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/qemu-img.c b/qemu-img.c
index 76430a8..491a460 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -1088,7 +1088,8 @@ static int check_empty_sectors(BlockBackend *blk, int64_t sect_num,
uint8_t *buffer, bool quiet)
{
int pnum, ret = 0;
- ret = blk_read(blk, sect_num, buffer, sect_count);
+ ret = blk_pread(blk, sect_num << BDRV_SECTOR_BITS, buffer,
+ sect_count << BDRV_SECTOR_BITS);
if (ret < 0) {
error_report("Error while reading offset %" PRId64 " of %s: %s",
sectors_to_bytes(sect_num), filename, strerror(-ret));
@@ -1301,7 +1302,8 @@ static int img_compare(int argc, char **argv)
nb_sectors = MIN(pnum1, pnum2);
} else if (allocated1 == allocated2) {
if (allocated1) {
- ret = blk_read(blk1, sector_num, buf1, nb_sectors);
+ ret = blk_pread(blk1, sector_num << BDRV_SECTOR_BITS, buf1,
+ nb_sectors << BDRV_SECTOR_BITS);
if (ret < 0) {
error_report("Error while reading offset %" PRId64 " of %s:"
" %s", sectors_to_bytes(sector_num), filename1,
@@ -1309,7 +1311,8 @@ static int img_compare(int argc, char **argv)
ret = 4;
goto out;
}
- ret = blk_read(blk2, sector_num, buf2, nb_sectors);
+ ret = blk_pread(blk2, sector_num << BDRV_SECTOR_BITS, buf2,
+ nb_sectors << BDRV_SECTOR_BITS);
if (ret < 0) {
error_report("Error while reading offset %" PRId64
" of %s: %s", sectors_to_bytes(sector_num),
@@ -1522,7 +1525,9 @@ static int convert_read(ImgConvertState *s, int64_t sector_num, int nb_sectors,
bs_sectors = s->src_sectors[s->src_cur];
n = MIN(nb_sectors, bs_sectors - (sector_num - s->src_cur_offset));
- ret = blk_read(blk, sector_num - s->src_cur_offset, buf, n);
+ ret = blk_pread(blk,
+ (sector_num - s->src_cur_offset) << BDRV_SECTOR_BITS,
+ buf, n << BDRV_SECTOR_BITS);
if (ret < 0) {
return ret;
}
@@ -1577,7 +1582,8 @@ static int convert_write(ImgConvertState *s, int64_t sector_num, int nb_sectors,
if (!s->min_sparse ||
is_allocated_sectors_min(buf, n, &n, s->min_sparse))
{
- ret = blk_write(s->target, sector_num, buf, n);
+ ret = blk_pwrite(s->target, sector_num << BDRV_SECTOR_BITS,
+ buf, n << BDRV_SECTOR_BITS, 0);
if (ret < 0) {
return ret;
}
@@ -3024,7 +3030,8 @@ static int img_rebase(int argc, char **argv)
n = old_backing_num_sectors - sector;
}
- ret = blk_read(blk_old_backing, sector, buf_old, n);
+ ret = blk_pread(blk_old_backing, sector << BDRV_SECTOR_BITS,
+ buf_old, n << BDRV_SECTOR_BITS);
if (ret < 0) {
error_report("error while reading from old backing file");
goto out;
@@ -3038,7 +3045,8 @@ static int img_rebase(int argc, char **argv)
n = new_backing_num_sectors - sector;
}
- ret = blk_read(blk_new_backing, sector, buf_new, n);
+ ret = blk_pread(blk_new_backing, sector << BDRV_SECTOR_BITS,
+ buf_new, n << BDRV_SECTOR_BITS);
if (ret < 0) {
error_report("error while reading from new backing file");
goto out;
@@ -3054,8 +3062,10 @@ static int img_rebase(int argc, char **argv)
if (compare_sectors(buf_old + written * 512,
buf_new + written * 512, n - written, &pnum))
{
- ret = blk_write(blk, sector + written,
- buf_old + written * 512, pnum);
+ ret = blk_pwrite(blk,
+ (sector + written) << BDRV_SECTOR_BITS,
+ buf_old + written * 512,
+ pnum << BDRV_SECTOR_BITS, 0);
if (ret < 0) {
error_report("Error while writing to COW image: %s",
strerror(-ret));
--
1.8.3.1
next prev parent reply other threads:[~2016-05-12 14:37 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-12 14:34 [Qemu-devel] [PULL 00/69] Block layer patches Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 01/69] block: Don't disable I/O throttling on sync requests Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 02/69] block: make bdrv_start_throttled_reqs return void Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 03/69] block: move restarting of throttled reqs to block/throttle-groups.c Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 04/69] block: extract bdrv_drain_poll/bdrv_co_yield_to_drain from bdrv_drain/bdrv_co_drain Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 05/69] block: introduce bdrv_no_throttling_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 06/69] block: plug whole tree at once, introduce bdrv_io_unplugged_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 07/69] linux-aio: make it more type safe Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 08/69] block: Introduce bdrv_driver_preadv() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 09/69] block: Introduce bdrv_driver_pwritev() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 10/69] block: Support AIO drivers in bdrv_driver_preadv/pwritev() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 11/69] block: Rename bdrv_co_do_preadv/writev to bdrv_co_preadv/writev Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 12/69] block: Introduce .bdrv_co_preadv/pwritev BlockDriver function Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 13/69] bochs: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 14/69] cloop: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 15/69] dmg: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 16/69] vdi: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 17/69] vdi: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 18/69] vmdk: Add vmdk_find_offset_in_cluster() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 19/69] vmdk: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 20/69] vmdk: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 21/69] vpc: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 22/69] vpc: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 23/69] vvfat: Implement .bdrv_co_preadv/pwritev interfaces Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 24/69] block: Remove BlockDriver.bdrv_read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 25/69] block: Fix typo in comment Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 26/69] block: always compile-check debug prints Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 27/69] Allow users to specify the vmdk virtual hardware version Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 28/69] qemu-io: Fix memory leak in 'aio_write -z' Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 29/69] block: Allow BDRV_REQ_FUA through blk_pwrite() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 30/69] block: Switch blk_read_unthrottled() to byte interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 31/69] block: Switch blk_*write_zeroes() " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 32/69] block: Introduce byte-based aio read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 33/69] ide: Switch to byte-based aio block access Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 34/69] scsi-disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 35/69] virtio: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 36/69] xen_disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 37/69] fdc: Switch to byte-based " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 38/69] nand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 39/69] onenand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 40/69] pflash: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 41/69] sd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 42/69] m25p80: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 43/69] atapi: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 44/69] nbd: " Kevin Wolf
2016-05-12 14:35 ` Kevin Wolf [this message]
2016-05-12 14:35 ` [Qemu-devel] [PULL 46/69] qemu-io: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 47/69] block: Kill unused sector-based blk_* functions Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 48/69] qcow2: improve qcow2_co_write_zeroes() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 49/69] block: Make supported_write_flags a per-bds property Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 50/69] block: Honor BDRV_REQ_FUA during write_zeroes Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 51/69] nbd: Simplify client FUA handling Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 52/69] block: Invalidate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 53/69] block: Drop superfluous invalidating bs->file from drivers Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 54/69] block: Inactivate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 55/69] iotests: fix the redirection order in 083 Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 56/69] qemu-img: check block status of backing file when converting Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 57/69] Add new block driver interface to add/delete a BDS's child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 58/69] quorum: implement bdrv_add_child() and bdrv_del_child() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 59/69] qmp: add monitor command to add/remove a child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 60/69] qemu-io: Add missing option documentation Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 61/69] qemu-io: Make 'open' subcommand more like command line Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 62/69] qemu-io: Use bool for command line flags Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 63/69] qemu-io: Allow unaligned access by default Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 64/69] qemu-io: Add 'write -f' to test FUA flag Kevin Wolf
2016-05-12 21:23 ` Eric Blake
2016-05-12 14:35 ` [Qemu-devel] [PULL 65/69] qemu-io: Add 'write -z -u' to test MAY_UNMAP flag Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 66/69] block: add support for --image-opts in block I/O tests Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 67/69] block: add support for encryption secrets " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 68/69] block: enable testing of LUKS driver with " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 69/69] qemu-iotests: iotests: fail hard if not run via "check" Kevin Wolf
2016-05-12 16:19 ` [Qemu-devel] [PULL 00/69] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463063749-2201-46-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).