qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 46/69] qemu-io: Switch to byte-based block access
Date: Thu, 12 May 2016 16:35:26 +0200	[thread overview]
Message-ID: <1463063749-2201-47-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1463063749-2201-1-git-send-email-kwolf@redhat.com>

From: Eric Blake <eblake@redhat.com>

qemu-io is the last user of several sector-based interfaces.
This patch upgrades to the new interfaces under the hood,
then deletes the resulting dead code.  Note that for maximum
back-compat, while the -p option is no longer required to get
blk_pread(), it is still needed to allow for unaligned access;
this is because qemu-iotest 23 relies on qemu-io rejecting
unaligned accesses without -p.  A later patch may clean up the
interface to be more user-friendly, but it's better to separate
what's done under the hood from what the user sees.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 qemu-io-cmds.c | 62 ++++++++++------------------------------------------------
 1 file changed, 10 insertions(+), 52 deletions(-)

diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
index 3040a4b..767ea5e 100644
--- a/qemu-io-cmds.c
+++ b/qemu-io-cmds.c
@@ -419,40 +419,6 @@ fail:
     return buf;
 }
 
-static int do_read(BlockBackend *blk, char *buf, int64_t offset, int64_t count,
-                   int64_t *total)
-{
-    int ret;
-
-    if (count >> 9 > INT_MAX) {
-        return -ERANGE;
-    }
-
-    ret = blk_read(blk, offset >> 9, (uint8_t *)buf, count >> 9);
-    if (ret < 0) {
-        return ret;
-    }
-    *total = count;
-    return 1;
-}
-
-static int do_write(BlockBackend *blk, char *buf, int64_t offset, int64_t count,
-                    int64_t *total)
-{
-    int ret;
-
-    if (count >> 9 > INT_MAX) {
-        return -ERANGE;
-    }
-
-    ret = blk_write(blk, offset >> 9, (uint8_t *)buf, count >> 9);
-    if (ret < 0) {
-        return ret;
-    }
-    *total = count;
-    return 1;
-}
-
 static int do_pread(BlockBackend *blk, char *buf, int64_t offset,
                     int64_t count, int64_t *total)
 {
@@ -588,8 +554,7 @@ static int do_aio_readv(BlockBackend *blk, QEMUIOVector *qiov,
 {
     int async_ret = NOT_DONE;
 
-    blk_aio_readv(blk, offset >> 9, qiov, qiov->size >> 9,
-                  aio_rw_done, &async_ret);
+    blk_aio_preadv(blk, offset, qiov, 0, aio_rw_done, &async_ret);
     while (async_ret == NOT_DONE) {
         main_loop_wait(false);
     }
@@ -603,8 +568,7 @@ static int do_aio_writev(BlockBackend *blk, QEMUIOVector *qiov,
 {
     int async_ret = NOT_DONE;
 
-    blk_aio_writev(blk, offset >> 9, qiov, qiov->size >> 9,
-                   aio_rw_done, &async_ret);
+    blk_aio_pwritev(blk, offset, qiov, 0, aio_rw_done, &async_ret);
     while (async_ret == NOT_DONE) {
         main_loop_wait(false);
     }
@@ -670,7 +634,7 @@ static void read_help(void)
 " -b, -- read from the VM state rather than the virtual disk\n"
 " -C, -- report statistics in a machine parsable format\n"
 " -l, -- length for pattern verification (only with -P)\n"
-" -p, -- use blk_pread to read the file\n"
+" -p, -- allow unaligned access\n"
 " -P, -- use a pattern to verify read data\n"
 " -q, -- quiet mode, do not show I/O statistics\n"
 " -s, -- start offset for pattern verification (only with -P)\n"
@@ -805,12 +769,10 @@ static int read_f(BlockBackend *blk, int argc, char **argv)
     buf = qemu_io_alloc(blk, count, 0xab);
 
     gettimeofday(&t1, NULL);
-    if (pflag) {
-        cnt = do_pread(blk, buf, offset, count, &total);
-    } else if (bflag) {
+    if (bflag) {
         cnt = do_load_vmstate(blk, buf, offset, count, &total);
     } else {
-        cnt = do_read(blk, buf, offset, count, &total);
+        cnt = do_pread(blk, buf, offset, count, &total);
     }
     gettimeofday(&t2, NULL);
 
@@ -990,7 +952,7 @@ static void write_help(void)
 " filled with a set pattern (0xcdcdcdcd).\n"
 " -b, -- write to the VM state rather than the virtual disk\n"
 " -c, -- write compressed data with blk_write_compressed\n"
-" -p, -- use blk_pwrite to write the file\n"
+" -p, -- allow unaligned access\n"
 " -P, -- use different pattern to fill file\n"
 " -C, -- report statistics in a machine parsable format\n"
 " -q, -- quiet mode, do not show I/O statistics\n"
@@ -1106,16 +1068,14 @@ static int write_f(BlockBackend *blk, int argc, char **argv)
     }
 
     gettimeofday(&t1, NULL);
-    if (pflag) {
-        cnt = do_pwrite(blk, buf, offset, count, &total);
-    } else if (bflag) {
+    if (bflag) {
         cnt = do_save_vmstate(blk, buf, offset, count, &total);
     } else if (zflag) {
         cnt = do_co_write_zeroes(blk, offset, count, &total);
     } else if (cflag) {
         cnt = do_write_compressed(blk, buf, offset, count, &total);
     } else {
-        cnt = do_write(blk, buf, offset, count, &total);
+        cnt = do_pwrite(blk, buf, offset, count, &total);
     }
     gettimeofday(&t2, NULL);
 
@@ -1592,8 +1552,7 @@ static int aio_read_f(BlockBackend *blk, int argc, char **argv)
     gettimeofday(&ctx->t1, NULL);
     block_acct_start(blk_get_stats(blk), &ctx->acct, ctx->qiov.size,
                      BLOCK_ACCT_READ);
-    blk_aio_readv(blk, ctx->offset >> 9, &ctx->qiov,
-                  ctx->qiov.size >> 9, aio_read_done, ctx);
+    blk_aio_preadv(blk, ctx->offset, &ctx->qiov, 0, aio_read_done, ctx);
     return 0;
 }
 
@@ -1718,8 +1677,7 @@ static int aio_write_f(BlockBackend *blk, int argc, char **argv)
         block_acct_start(blk_get_stats(blk), &ctx->acct, ctx->qiov.size,
                          BLOCK_ACCT_WRITE);
 
-        blk_aio_writev(blk, ctx->offset >> 9, &ctx->qiov,
-                       ctx->qiov.size >> 9, aio_write_done, ctx);
+        blk_aio_pwritev(blk, ctx->offset, &ctx->qiov, 0, aio_write_done, ctx);
     }
     return 0;
 }
-- 
1.8.3.1

  parent reply	other threads:[~2016-05-12 14:37 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-12 14:34 [Qemu-devel] [PULL 00/69] Block layer patches Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 01/69] block: Don't disable I/O throttling on sync requests Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 02/69] block: make bdrv_start_throttled_reqs return void Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 03/69] block: move restarting of throttled reqs to block/throttle-groups.c Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 04/69] block: extract bdrv_drain_poll/bdrv_co_yield_to_drain from bdrv_drain/bdrv_co_drain Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 05/69] block: introduce bdrv_no_throttling_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 06/69] block: plug whole tree at once, introduce bdrv_io_unplugged_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 07/69] linux-aio: make it more type safe Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 08/69] block: Introduce bdrv_driver_preadv() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 09/69] block: Introduce bdrv_driver_pwritev() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 10/69] block: Support AIO drivers in bdrv_driver_preadv/pwritev() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 11/69] block: Rename bdrv_co_do_preadv/writev to bdrv_co_preadv/writev Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 12/69] block: Introduce .bdrv_co_preadv/pwritev BlockDriver function Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 13/69] bochs: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 14/69] cloop: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 15/69] dmg: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 16/69] vdi: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 17/69] vdi: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 18/69] vmdk: Add vmdk_find_offset_in_cluster() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 19/69] vmdk: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 20/69] vmdk: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 21/69] vpc: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 22/69] vpc: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 23/69] vvfat: Implement .bdrv_co_preadv/pwritev interfaces Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 24/69] block: Remove BlockDriver.bdrv_read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 25/69] block: Fix typo in comment Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 26/69] block: always compile-check debug prints Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 27/69] Allow users to specify the vmdk virtual hardware version Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 28/69] qemu-io: Fix memory leak in 'aio_write -z' Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 29/69] block: Allow BDRV_REQ_FUA through blk_pwrite() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 30/69] block: Switch blk_read_unthrottled() to byte interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 31/69] block: Switch blk_*write_zeroes() " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 32/69] block: Introduce byte-based aio read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 33/69] ide: Switch to byte-based aio block access Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 34/69] scsi-disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 35/69] virtio: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 36/69] xen_disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 37/69] fdc: Switch to byte-based " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 38/69] nand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 39/69] onenand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 40/69] pflash: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 41/69] sd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 42/69] m25p80: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 43/69] atapi: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 44/69] nbd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 45/69] qemu-img: " Kevin Wolf
2016-05-12 14:35 ` Kevin Wolf [this message]
2016-05-12 14:35 ` [Qemu-devel] [PULL 47/69] block: Kill unused sector-based blk_* functions Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 48/69] qcow2: improve qcow2_co_write_zeroes() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 49/69] block: Make supported_write_flags a per-bds property Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 50/69] block: Honor BDRV_REQ_FUA during write_zeroes Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 51/69] nbd: Simplify client FUA handling Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 52/69] block: Invalidate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 53/69] block: Drop superfluous invalidating bs->file from drivers Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 54/69] block: Inactivate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 55/69] iotests: fix the redirection order in 083 Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 56/69] qemu-img: check block status of backing file when converting Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 57/69] Add new block driver interface to add/delete a BDS's child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 58/69] quorum: implement bdrv_add_child() and bdrv_del_child() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 59/69] qmp: add monitor command to add/remove a child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 60/69] qemu-io: Add missing option documentation Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 61/69] qemu-io: Make 'open' subcommand more like command line Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 62/69] qemu-io: Use bool for command line flags Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 63/69] qemu-io: Allow unaligned access by default Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 64/69] qemu-io: Add 'write -f' to test FUA flag Kevin Wolf
2016-05-12 21:23   ` Eric Blake
2016-05-12 14:35 ` [Qemu-devel] [PULL 65/69] qemu-io: Add 'write -z -u' to test MAY_UNMAP flag Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 66/69] block: add support for --image-opts in block I/O tests Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 67/69] block: add support for encryption secrets " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 68/69] block: enable testing of LUKS driver with " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 69/69] qemu-iotests: iotests: fail hard if not run via "check" Kevin Wolf
2016-05-12 16:19 ` [Qemu-devel] [PULL 00/69] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463063749-2201-47-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).