From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 53/69] block: Drop superfluous invalidating bs->file from drivers
Date: Thu, 12 May 2016 16:35:33 +0200 [thread overview]
Message-ID: <1463063749-2201-54-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1463063749-2201-1-git-send-email-kwolf@redhat.com>
From: Fam Zheng <famz@redhat.com>
Now they are invalidated by the block layer, so it's not necessary to
do this in block drivers' implementations of .bdrv_invalidate_cache.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow2.c | 7 -------
block/qed.c | 6 ------
block/quorum.c | 16 ----------------
3 files changed, 29 deletions(-)
diff --git a/block/qcow2.c b/block/qcow2.c
index 555627a..62febfc 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1757,13 +1757,6 @@ static void qcow2_invalidate_cache(BlockDriverState *bs, Error **errp)
qcow2_close(bs);
- bdrv_invalidate_cache(bs->file->bs, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- bs->drv = NULL;
- return;
- }
-
memset(s, 0, sizeof(BDRVQcow2State));
options = qdict_clone_shallow(bs->options);
diff --git a/block/qed.c b/block/qed.c
index 6cfd4c1..10ce18e 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -1594,12 +1594,6 @@ static void bdrv_qed_invalidate_cache(BlockDriverState *bs, Error **errp)
bdrv_qed_close(bs);
- bdrv_invalidate_cache(bs->file->bs, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- return;
- }
-
memset(s, 0, sizeof(BDRVQEDState));
ret = bdrv_qed_open(bs, NULL, bs->open_flags, &local_err);
if (local_err) {
diff --git a/block/quorum.c b/block/quorum.c
index da15465..8f7c099 100644
--- a/block/quorum.c
+++ b/block/quorum.c
@@ -747,21 +747,6 @@ static int64_t quorum_getlength(BlockDriverState *bs)
return result;
}
-static void quorum_invalidate_cache(BlockDriverState *bs, Error **errp)
-{
- BDRVQuorumState *s = bs->opaque;
- Error *local_err = NULL;
- int i;
-
- for (i = 0; i < s->num_children; i++) {
- bdrv_invalidate_cache(s->children[i]->bs, &local_err);
- if (local_err) {
- error_propagate(errp, local_err);
- return;
- }
- }
-}
-
static coroutine_fn int quorum_co_flush(BlockDriverState *bs)
{
BDRVQuorumState *s = bs->opaque;
@@ -1070,7 +1055,6 @@ static BlockDriver bdrv_quorum = {
.bdrv_aio_readv = quorum_aio_readv,
.bdrv_aio_writev = quorum_aio_writev,
- .bdrv_invalidate_cache = quorum_invalidate_cache,
.bdrv_detach_aio_context = quorum_detach_aio_context,
.bdrv_attach_aio_context = quorum_attach_aio_context,
--
1.8.3.1
next prev parent reply other threads:[~2016-05-12 14:37 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-12 14:34 [Qemu-devel] [PULL 00/69] Block layer patches Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 01/69] block: Don't disable I/O throttling on sync requests Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 02/69] block: make bdrv_start_throttled_reqs return void Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 03/69] block: move restarting of throttled reqs to block/throttle-groups.c Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 04/69] block: extract bdrv_drain_poll/bdrv_co_yield_to_drain from bdrv_drain/bdrv_co_drain Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 05/69] block: introduce bdrv_no_throttling_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 06/69] block: plug whole tree at once, introduce bdrv_io_unplugged_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 07/69] linux-aio: make it more type safe Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 08/69] block: Introduce bdrv_driver_preadv() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 09/69] block: Introduce bdrv_driver_pwritev() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 10/69] block: Support AIO drivers in bdrv_driver_preadv/pwritev() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 11/69] block: Rename bdrv_co_do_preadv/writev to bdrv_co_preadv/writev Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 12/69] block: Introduce .bdrv_co_preadv/pwritev BlockDriver function Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 13/69] bochs: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 14/69] cloop: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 15/69] dmg: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 16/69] vdi: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 17/69] vdi: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 18/69] vmdk: Add vmdk_find_offset_in_cluster() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 19/69] vmdk: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 20/69] vmdk: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 21/69] vpc: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 22/69] vpc: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 23/69] vvfat: Implement .bdrv_co_preadv/pwritev interfaces Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 24/69] block: Remove BlockDriver.bdrv_read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 25/69] block: Fix typo in comment Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 26/69] block: always compile-check debug prints Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 27/69] Allow users to specify the vmdk virtual hardware version Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 28/69] qemu-io: Fix memory leak in 'aio_write -z' Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 29/69] block: Allow BDRV_REQ_FUA through blk_pwrite() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 30/69] block: Switch blk_read_unthrottled() to byte interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 31/69] block: Switch blk_*write_zeroes() " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 32/69] block: Introduce byte-based aio read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 33/69] ide: Switch to byte-based aio block access Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 34/69] scsi-disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 35/69] virtio: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 36/69] xen_disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 37/69] fdc: Switch to byte-based " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 38/69] nand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 39/69] onenand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 40/69] pflash: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 41/69] sd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 42/69] m25p80: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 43/69] atapi: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 44/69] nbd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 45/69] qemu-img: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 46/69] qemu-io: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 47/69] block: Kill unused sector-based blk_* functions Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 48/69] qcow2: improve qcow2_co_write_zeroes() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 49/69] block: Make supported_write_flags a per-bds property Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 50/69] block: Honor BDRV_REQ_FUA during write_zeroes Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 51/69] nbd: Simplify client FUA handling Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 52/69] block: Invalidate all children Kevin Wolf
2016-05-12 14:35 ` Kevin Wolf [this message]
2016-05-12 14:35 ` [Qemu-devel] [PULL 54/69] block: Inactivate " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 55/69] iotests: fix the redirection order in 083 Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 56/69] qemu-img: check block status of backing file when converting Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 57/69] Add new block driver interface to add/delete a BDS's child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 58/69] quorum: implement bdrv_add_child() and bdrv_del_child() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 59/69] qmp: add monitor command to add/remove a child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 60/69] qemu-io: Add missing option documentation Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 61/69] qemu-io: Make 'open' subcommand more like command line Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 62/69] qemu-io: Use bool for command line flags Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 63/69] qemu-io: Allow unaligned access by default Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 64/69] qemu-io: Add 'write -f' to test FUA flag Kevin Wolf
2016-05-12 21:23 ` Eric Blake
2016-05-12 14:35 ` [Qemu-devel] [PULL 65/69] qemu-io: Add 'write -z -u' to test MAY_UNMAP flag Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 66/69] block: add support for --image-opts in block I/O tests Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 67/69] block: add support for encryption secrets " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 68/69] block: enable testing of LUKS driver with " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 69/69] qemu-iotests: iotests: fail hard if not run via "check" Kevin Wolf
2016-05-12 16:19 ` [Qemu-devel] [PULL 00/69] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463063749-2201-54-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).