From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 06/50] target-arm: make cpu-qom.h not target specific
Date: Mon, 16 May 2016 17:35:38 +0200 [thread overview]
Message-ID: <1463412982-6681-7-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1463412982-6681-1-git-send-email-pbonzini@redhat.com>
Make ARMCPU an opaque type within cpu-qom.h, and move all definitions of
private methods, as well as all type definitions that require knowledge
of the layout to cpu.h. This helps making files independent of NEED_CPU_H
if they only need to pass around CPU pointers.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
target-arm/cpu-qom.h | 178 +-------------------------------------------------
target-arm/cpu.h | 179 ++++++++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 179 insertions(+), 178 deletions(-)
diff --git a/target-arm/cpu-qom.h b/target-arm/cpu-qom.h
index 1061c08..3991173 100644
--- a/target-arm/cpu-qom.h
+++ b/target-arm/cpu-qom.h
@@ -22,6 +22,8 @@
#include "qom/cpu.h"
+struct arm_boot_info;
+
#define TYPE_ARM_CPU "arm-cpu"
#define ARM_CPU_CLASS(klass) \
@@ -47,145 +49,7 @@ typedef struct ARMCPUClass {
void (*parent_reset)(CPUState *cpu);
} ARMCPUClass;
-/**
- * ARMCPU:
- * @env: #CPUARMState
- *
- * An ARM CPU core.
- */
-typedef struct ARMCPU {
- /*< private >*/
- CPUState parent_obj;
- /*< public >*/
-
- CPUARMState env;
-
- /* Coprocessor information */
- GHashTable *cp_regs;
- /* For marshalling (mostly coprocessor) register state between the
- * kernel and QEMU (for KVM) and between two QEMUs (for migration),
- * we use these arrays.
- */
- /* List of register indexes managed via these arrays; (full KVM style
- * 64 bit indexes, not CPRegInfo 32 bit indexes)
- */
- uint64_t *cpreg_indexes;
- /* Values of the registers (cpreg_indexes[i]'s value is cpreg_values[i]) */
- uint64_t *cpreg_values;
- /* Length of the indexes, values, reset_values arrays */
- int32_t cpreg_array_len;
- /* These are used only for migration: incoming data arrives in
- * these fields and is sanity checked in post_load before copying
- * to the working data structures above.
- */
- uint64_t *cpreg_vmstate_indexes;
- uint64_t *cpreg_vmstate_values;
- int32_t cpreg_vmstate_array_len;
-
- /* Timers used by the generic (architected) timer */
- QEMUTimer *gt_timer[NUM_GTIMERS];
- /* GPIO outputs for generic timer */
- qemu_irq gt_timer_outputs[NUM_GTIMERS];
-
- /* MemoryRegion to use for secure physical accesses */
- MemoryRegion *secure_memory;
-
- /* 'compatible' string for this CPU for Linux device trees */
- const char *dtb_compatible;
-
- /* PSCI version for this CPU
- * Bits[31:16] = Major Version
- * Bits[15:0] = Minor Version
- */
- uint32_t psci_version;
-
- /* Should CPU start in PSCI powered-off state? */
- bool start_powered_off;
- /* CPU currently in PSCI powered-off state */
- bool powered_off;
- /* CPU has security extension */
- bool has_el3;
-
- /* CPU has memory protection unit */
- bool has_mpu;
- /* PMSAv7 MPU number of supported regions */
- uint32_t pmsav7_dregion;
-
- /* PSCI conduit used to invoke PSCI methods
- * 0 - disabled, 1 - smc, 2 - hvc
- */
- uint32_t psci_conduit;
-
- /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or
- * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type.
- */
- uint32_t kvm_target;
-
- /* KVM init features for this CPU */
- uint32_t kvm_init_features[7];
-
- /* Uniprocessor system with MP extensions */
- bool mp_is_up;
-
- /* The instance init functions for implementation-specific subclasses
- * set these fields to specify the implementation-dependent values of
- * various constant registers and reset values of non-constant
- * registers.
- * Some of these might become QOM properties eventually.
- * Field names match the official register names as defined in the
- * ARMv7AR ARM Architecture Reference Manual. A reset_ prefix
- * is used for reset values of non-constant registers; no reset_
- * prefix means a constant register.
- */
- uint32_t midr;
- uint32_t revidr;
- uint32_t reset_fpsid;
- uint32_t mvfr0;
- uint32_t mvfr1;
- uint32_t mvfr2;
- uint32_t ctr;
- uint32_t reset_sctlr;
- uint32_t id_pfr0;
- uint32_t id_pfr1;
- uint32_t id_dfr0;
- uint32_t pmceid0;
- uint32_t pmceid1;
- uint32_t id_afr0;
- uint32_t id_mmfr0;
- uint32_t id_mmfr1;
- uint32_t id_mmfr2;
- uint32_t id_mmfr3;
- uint32_t id_mmfr4;
- uint32_t id_isar0;
- uint32_t id_isar1;
- uint32_t id_isar2;
- uint32_t id_isar3;
- uint32_t id_isar4;
- uint32_t id_isar5;
- uint64_t id_aa64pfr0;
- uint64_t id_aa64pfr1;
- uint64_t id_aa64dfr0;
- uint64_t id_aa64dfr1;
- uint64_t id_aa64afr0;
- uint64_t id_aa64afr1;
- uint64_t id_aa64isar0;
- uint64_t id_aa64isar1;
- uint64_t id_aa64mmfr0;
- uint64_t id_aa64mmfr1;
- uint32_t dbgdidr;
- uint32_t clidr;
- uint64_t mp_affinity; /* MP ID without feature bits */
- /* The elements of this array are the CCSIDR values for each cache,
- * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
- */
- uint32_t ccsidr[16];
- uint64_t reset_cbar;
- uint32_t reset_auxcr;
- bool reset_hivecs;
- /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
- uint32_t dcz_blocksize;
- uint64_t rvbar;
-} ARMCPU;
+typedef struct ARMCPU ARMCPU;
#define TYPE_AARCH64_CPU "aarch64-cpu"
#define AARCH64_CPU_CLASS(klass) \
@@ -199,40 +63,9 @@ typedef struct AArch64CPUClass {
/*< public >*/
} AArch64CPUClass;
-static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
-{
- return container_of(env, ARMCPU, env);
-}
-
-#define ENV_GET_CPU(e) CPU(arm_env_get_cpu(e))
-
-#define ENV_OFFSET offsetof(ARMCPU, env)
-
-#ifndef CONFIG_USER_ONLY
-extern const struct VMStateDescription vmstate_arm_cpu;
-#endif
-
void register_cp_regs_for_features(ARMCPU *cpu);
void init_cpreg_list(ARMCPU *cpu);
-void arm_cpu_do_interrupt(CPUState *cpu);
-void arm_v7m_cpu_do_interrupt(CPUState *cpu);
-bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req);
-
-void arm_cpu_dump_state(CPUState *cs, FILE *f, fprintf_function cpu_fprintf,
- int flags);
-
-hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr,
- MemTxAttrs *attrs);
-
-int arm_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
-int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
-
-int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs,
- int cpuid, void *opaque);
-int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs,
- int cpuid, void *opaque);
-
/* Callback functions for the generic timer's timers. */
void arm_gt_ptimer_cb(void *opaque);
void arm_gt_vtimer_cb(void *opaque);
@@ -252,9 +85,4 @@ void arm_gt_stimer_cb(void *opaque);
#define ARM64_AFFINITY_MASK \
(ARM_AFF0_MASK|ARM_AFF1_MASK|ARM_AFF2_MASK|ARM_AFF3_MASK)
-#ifdef TARGET_AARCH64
-int aarch64_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
-int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
-#endif
-
#endif
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 066ff67..bf6904c 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -34,6 +34,7 @@
#define CPUArchState struct CPUARMState
#include "qemu-common.h"
+#include "cpu-qom.h"
#include "exec/cpu-defs.h"
#include "fpu/softfloat.h"
@@ -91,8 +92,6 @@
#define ARM_CPU_VIRQ 2
#define ARM_CPU_VFIQ 3
-struct arm_boot_info;
-
#define NB_MMU_MODES 7
#define TARGET_INSN_START_EXTRA_WORDS 1
@@ -504,7 +503,181 @@ typedef struct CPUARMState {
const struct arm_boot_info *boot_info;
} CPUARMState;
-#include "cpu-qom.h"
+/**
+ * ARMCPU:
+ * @env: #CPUARMState
+ *
+ * An ARM CPU core.
+ */
+struct ARMCPU {
+ /*< private >*/
+ CPUState parent_obj;
+ /*< public >*/
+
+ CPUARMState env;
+
+ /* Coprocessor information */
+ GHashTable *cp_regs;
+ /* For marshalling (mostly coprocessor) register state between the
+ * kernel and QEMU (for KVM) and between two QEMUs (for migration),
+ * we use these arrays.
+ */
+ /* List of register indexes managed via these arrays; (full KVM style
+ * 64 bit indexes, not CPRegInfo 32 bit indexes)
+ */
+ uint64_t *cpreg_indexes;
+ /* Values of the registers (cpreg_indexes[i]'s value is cpreg_values[i]) */
+ uint64_t *cpreg_values;
+ /* Length of the indexes, values, reset_values arrays */
+ int32_t cpreg_array_len;
+ /* These are used only for migration: incoming data arrives in
+ * these fields and is sanity checked in post_load before copying
+ * to the working data structures above.
+ */
+ uint64_t *cpreg_vmstate_indexes;
+ uint64_t *cpreg_vmstate_values;
+ int32_t cpreg_vmstate_array_len;
+
+ /* Timers used by the generic (architected) timer */
+ QEMUTimer *gt_timer[NUM_GTIMERS];
+ /* GPIO outputs for generic timer */
+ qemu_irq gt_timer_outputs[NUM_GTIMERS];
+
+ /* MemoryRegion to use for secure physical accesses */
+ MemoryRegion *secure_memory;
+
+ /* 'compatible' string for this CPU for Linux device trees */
+ const char *dtb_compatible;
+
+ /* PSCI version for this CPU
+ * Bits[31:16] = Major Version
+ * Bits[15:0] = Minor Version
+ */
+ uint32_t psci_version;
+
+ /* Should CPU start in PSCI powered-off state? */
+ bool start_powered_off;
+ /* CPU currently in PSCI powered-off state */
+ bool powered_off;
+ /* CPU has security extension */
+ bool has_el3;
+
+ /* CPU has memory protection unit */
+ bool has_mpu;
+ /* PMSAv7 MPU number of supported regions */
+ uint32_t pmsav7_dregion;
+
+ /* PSCI conduit used to invoke PSCI methods
+ * 0 - disabled, 1 - smc, 2 - hvc
+ */
+ uint32_t psci_conduit;
+
+ /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or
+ * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type.
+ */
+ uint32_t kvm_target;
+
+ /* KVM init features for this CPU */
+ uint32_t kvm_init_features[7];
+
+ /* Uniprocessor system with MP extensions */
+ bool mp_is_up;
+
+ /* The instance init functions for implementation-specific subclasses
+ * set these fields to specify the implementation-dependent values of
+ * various constant registers and reset values of non-constant
+ * registers.
+ * Some of these might become QOM properties eventually.
+ * Field names match the official register names as defined in the
+ * ARMv7AR ARM Architecture Reference Manual. A reset_ prefix
+ * is used for reset values of non-constant registers; no reset_
+ * prefix means a constant register.
+ */
+ uint32_t midr;
+ uint32_t revidr;
+ uint32_t reset_fpsid;
+ uint32_t mvfr0;
+ uint32_t mvfr1;
+ uint32_t mvfr2;
+ uint32_t ctr;
+ uint32_t reset_sctlr;
+ uint32_t id_pfr0;
+ uint32_t id_pfr1;
+ uint32_t id_dfr0;
+ uint32_t pmceid0;
+ uint32_t pmceid1;
+ uint32_t id_afr0;
+ uint32_t id_mmfr0;
+ uint32_t id_mmfr1;
+ uint32_t id_mmfr2;
+ uint32_t id_mmfr3;
+ uint32_t id_mmfr4;
+ uint32_t id_isar0;
+ uint32_t id_isar1;
+ uint32_t id_isar2;
+ uint32_t id_isar3;
+ uint32_t id_isar4;
+ uint32_t id_isar5;
+ uint64_t id_aa64pfr0;
+ uint64_t id_aa64pfr1;
+ uint64_t id_aa64dfr0;
+ uint64_t id_aa64dfr1;
+ uint64_t id_aa64afr0;
+ uint64_t id_aa64afr1;
+ uint64_t id_aa64isar0;
+ uint64_t id_aa64isar1;
+ uint64_t id_aa64mmfr0;
+ uint64_t id_aa64mmfr1;
+ uint32_t dbgdidr;
+ uint32_t clidr;
+ uint64_t mp_affinity; /* MP ID without feature bits */
+ /* The elements of this array are the CCSIDR values for each cache,
+ * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc.
+ */
+ uint32_t ccsidr[16];
+ uint64_t reset_cbar;
+ uint32_t reset_auxcr;
+ bool reset_hivecs;
+ /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
+ uint32_t dcz_blocksize;
+ uint64_t rvbar;
+};
+
+static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
+{
+ return container_of(env, ARMCPU, env);
+}
+
+#define ENV_GET_CPU(e) CPU(arm_env_get_cpu(e))
+
+#define ENV_OFFSET offsetof(ARMCPU, env)
+
+#ifndef CONFIG_USER_ONLY
+extern const struct VMStateDescription vmstate_arm_cpu;
+#endif
+
+void arm_cpu_do_interrupt(CPUState *cpu);
+void arm_v7m_cpu_do_interrupt(CPUState *cpu);
+bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req);
+
+void arm_cpu_dump_state(CPUState *cs, FILE *f, fprintf_function cpu_fprintf,
+ int flags);
+
+hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr,
+ MemTxAttrs *attrs);
+
+int arm_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
+int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
+
+int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs,
+ int cpuid, void *opaque);
+int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs,
+ int cpuid, void *opaque);
+
+#ifdef TARGET_AARCH64
+int aarch64_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
+int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
+#endif
ARMCPU *cpu_arm_init(const char *cpu_model);
int cpu_arm_exec(CPUState *cpu);
--
1.8.3.1
next prev parent reply other threads:[~2016-05-16 15:36 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-16 15:35 [Qemu-devel] [PATCH CFT v3 00/50] NEED_CPU_H / cpu.h / hw/hw.h cleanups Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 01/50] scripts: add script to build QEMU and analyze inclusions Paolo Bonzini
2016-05-16 16:20 ` Eric Blake
2016-05-16 16:25 ` Paolo Bonzini
2016-05-16 16:30 ` Eric Blake
2016-05-16 15:35 ` [Qemu-devel] [PATCH 02/50] include: move CPU-related definitions out of qemu-common.h Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 03/50] log: do not use CONFIG_USER_ONLY Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 04/50] cpu: make cpu-qom.h only include-able from cpu.h Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 05/50] target-alpha: make cpu-qom.h not target specific Paolo Bonzini
2016-05-16 15:35 ` Paolo Bonzini [this message]
2016-05-16 15:35 ` [Qemu-devel] [PATCH 07/50] target-cris: " Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 08/50] target-i386: " Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 09/50] target-lm32: " Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 10/50] target-m68k: " Paolo Bonzini
2016-05-17 10:27 ` Thomas Huth
2016-05-16 15:35 ` [Qemu-devel] [PATCH 11/50] target-microblaze: " Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 12/50] target-mips: " Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 13/50] target-ppc: do not use target_ulong in cpu-qom.h Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 14/50] target-ppc: make cpu-qom.h not target specific Paolo Bonzini
2016-05-17 11:19 ` Thomas Huth
2016-05-17 11:36 ` Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 15/50] target-s390x: " Paolo Bonzini
2016-05-17 10:35 ` Thomas Huth
2016-05-19 9:05 ` Cornelia Huck
2016-05-16 15:35 ` [Qemu-devel] [PATCH 16/50] target-sh4: " Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 17/50] target-sparc: " Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 18/50] target-tricore: " Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 20/50] target-xtensa: " Paolo Bonzini
2016-05-17 14:24 ` Max Filippov
2016-05-17 16:42 ` Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 21/50] arm: include cpu-qom.h in files that require ARMCPU Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 22/50] m68k: include cpu-qom.h in files that require M68KCPU Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 23/50] sh4: include cpu-qom.h in files that require SuperHCPU Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 24/50] alpha: include cpu-qom.h in files that require AlphaCPU Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 25/50] mips: use MIPSCPU instead of CPUMIPSState Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 26/50] ppc: use PowerPCCPU instead of CPUPPCState Paolo Bonzini
2016-05-16 15:35 ` [Qemu-devel] [PATCH 27/50] arm: remove useless cpu.h inclusion Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 28/50] explicitly include qom/cpu.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 29/50] explicitly include hw/qdev-core.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 30/50] explicitly include linux/kvm.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 31/50] apic: move target-dependent definitions to cpu.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 32/50] include: poison symbols in osdep.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 33/50] hw: do not use VMSTATE_*TL Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 34/50] hw: move CPU state serialization to migration/cpu.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 35/50] hw: cannot include hw/hw.h from user emulation Paolo Bonzini
2016-05-19 9:08 ` Cornelia Huck
2016-05-16 15:36 ` [Qemu-devel] [PATCH 36/50] cpu: move endian-dependent load/store functions to cpu-all.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 37/50] qemu-common: stop including qemu/bswap.h from qemu-common.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 38/50] qemu-common: stop including qemu/host-utils.h " Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 39/50] gdbstub: remove unnecessary includes from gdbstub-xml.c Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 40/50] dma: do not depend on kvm_enabled() Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 41/50] s390x: move stuff out of cpu.h Paolo Bonzini
2016-05-19 10:17 ` Cornelia Huck
2016-05-19 10:32 ` Paolo Bonzini
2016-05-19 10:41 ` Cornelia Huck
2016-05-16 15:36 ` [Qemu-devel] [PATCH 43/50] qemu-common: push cpu.h inclusion out of qemu-common.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 44/50] arm: move arm_log_exception into .c file Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 45/50] mips: move CP0 functions out of cpu.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 46/50] hw: explicitly include qemu/log.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 47/50] exec: extract exec/tb-context.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 48/50] cpu: move exec-all.h inclusion out of cpu.h Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 49/50] hw: remove pio_addr_t Paolo Bonzini
2016-05-16 15:36 ` [Qemu-devel] [PATCH 50/50] hw: clean up hw/hw.h includes Paolo Bonzini
2016-05-16 16:53 ` [Qemu-devel] [PATCH CFT v3 00/50] NEED_CPU_H / cpu.h / hw/hw.h cleanups Peter Maydell
2016-05-16 16:59 ` Peter Maydell
2016-05-17 8:56 ` Thomas Huth
2016-05-17 9:50 ` Paolo Bonzini
2016-05-18 8:21 ` Cornelia Huck
2016-05-18 8:59 ` Cornelia Huck
2016-05-18 10:03 ` Paolo Bonzini
2016-05-18 11:11 ` Paolo Bonzini
2016-05-18 13:46 ` Cornelia Huck
2016-05-18 13:53 ` Paolo Bonzini
-- strict thread matches above, loose matches on Subject: below --
2016-04-08 20:28 [Qemu-devel] [PATCH for-2.7 00/49] " Paolo Bonzini
2016-04-08 20:28 ` [Qemu-devel] [PATCH 06/50] target-arm: make cpu-qom.h not target specific Paolo Bonzini
2016-04-21 10:29 ` Alex Bennée
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463412982-6681-7-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).