qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 18/52] target-sh4: make cpu-qom.h not target specific
Date: Thu, 19 May 2016 13:18:12 +0200	[thread overview]
Message-ID: <1463656726-35952-19-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1463656726-35952-1-git-send-email-pbonzini@redhat.com>

Make SuperHCPU an opaque type within cpu-qom.h, and move all definitions
of private methods, as well as all type definitions that require knowledge
of the layout to cpu.h.  This helps making files independent of NEED_CPU_H
if they only need to pass around CPU pointers.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 target-sh4/cpu-qom.h | 31 +------------------------------
 target-sh4/cpu.h     | 32 +++++++++++++++++++++++++++++++-
 2 files changed, 32 insertions(+), 31 deletions(-)

diff --git a/target-sh4/cpu-qom.h b/target-sh4/cpu-qom.h
index 6341238..01abb20 100644
--- a/target-sh4/cpu-qom.h
+++ b/target-sh4/cpu-qom.h
@@ -60,35 +60,6 @@ typedef struct SuperHCPUClass {
     uint32_t cvr;
 } SuperHCPUClass;
 
-/**
- * SuperHCPU:
- * @env: #CPUSH4State
- *
- * A SuperH CPU.
- */
-typedef struct SuperHCPU {
-    /*< private >*/
-    CPUState parent_obj;
-    /*< public >*/
-
-    CPUSH4State env;
-} SuperHCPU;
-
-static inline SuperHCPU *sh_env_get_cpu(CPUSH4State *env)
-{
-    return container_of(env, SuperHCPU, env);
-}
-
-#define ENV_GET_CPU(e) CPU(sh_env_get_cpu(e))
-
-#define ENV_OFFSET offsetof(SuperHCPU, env)
-
-void superh_cpu_do_interrupt(CPUState *cpu);
-bool superh_cpu_exec_interrupt(CPUState *cpu, int int_req);
-void superh_cpu_dump_state(CPUState *cpu, FILE *f,
-                           fprintf_function cpu_fprintf, int flags);
-hwaddr superh_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
-int superh_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
-int superh_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
+typedef struct SuperHCPU SuperHCPU;
 
 #endif
diff --git a/target-sh4/cpu.h b/target-sh4/cpu.h
index 10c0191..9bd15b8 100644
--- a/target-sh4/cpu.h
+++ b/target-sh4/cpu.h
@@ -20,6 +20,7 @@
 #define _CPU_SH4_H
 
 #include "qemu-common.h"
+#include "cpu-qom.h"
 
 #define TARGET_LONG_BITS 32
 
@@ -187,7 +188,36 @@ typedef struct CPUSH4State {
     memory_content **movcal_backup_tail;
 } CPUSH4State;
 
-#include "cpu-qom.h"
+/**
+ * SuperHCPU:
+ * @env: #CPUSH4State
+ *
+ * A SuperH CPU.
+ */
+struct SuperHCPU {
+    /*< private >*/
+    CPUState parent_obj;
+    /*< public >*/
+
+    CPUSH4State env;
+};
+
+static inline SuperHCPU *sh_env_get_cpu(CPUSH4State *env)
+{
+    return container_of(env, SuperHCPU, env);
+}
+
+#define ENV_GET_CPU(e) CPU(sh_env_get_cpu(e))
+
+#define ENV_OFFSET offsetof(SuperHCPU, env)
+
+void superh_cpu_do_interrupt(CPUState *cpu);
+bool superh_cpu_exec_interrupt(CPUState *cpu, int int_req);
+void superh_cpu_dump_state(CPUState *cpu, FILE *f,
+                           fprintf_function cpu_fprintf, int flags);
+hwaddr superh_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
+int superh_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
+int superh_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
 
 void sh4_translate_init(void);
 SuperHCPU *cpu_sh4_init(const char *cpu_model);
-- 
1.8.3.1

  parent reply	other threads:[~2016-05-19 11:19 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-19 11:17 [Qemu-devel] [PULL 00/52] NEED_CPU_H cleanups Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 01/52] scripts: add script to build QEMU and analyze inclusions Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 02/52] s390x: move .needed functions for subsections to machine.c Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 03/52] include: move CPU-related definitions out of qemu-common.h Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 04/52] log: do not use CONFIG_USER_ONLY Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 05/52] cpu: make cpu-qom.h only include-able from cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 06/52] target-alpha: make cpu-qom.h not target specific Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 07/52] target-arm: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 08/52] target-cris: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 09/52] target-i386: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 10/52] target-lm32: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 11/52] target-m68k: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 12/52] target-microblaze: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 13/52] target-mips: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 14/52] target-ppc: do not use target_ulong in cpu-qom.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 15/52] target-ppc: do not make PowerPCCPUClass depend on target-specific symbols Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 16/52] target-ppc: make cpu-qom.h not target specific Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 17/52] target-s390x: " Paolo Bonzini
2016-05-19 11:18 ` Paolo Bonzini [this message]
2016-05-19 11:18 ` [Qemu-devel] [PULL 19/52] target-sparc: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 20/52] target-tricore: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 21/52] target-unicore32: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 22/52] target-xtensa: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 23/52] arm: include cpu-qom.h in files that require ARMCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 24/52] m68k: include cpu-qom.h in files that require M68KCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 25/52] sh4: include cpu-qom.h in files that require SuperHCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 26/52] alpha: include cpu-qom.h in files that require AlphaCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 27/52] mips: use MIPSCPU instead of CPUMIPSState Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 28/52] ppc: use PowerPCCPU instead of CPUPPCState Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 29/52] arm: remove useless cpu.h inclusion Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 30/52] explicitly include qom/cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 31/52] explicitly include hw/qdev-core.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 32/52] explicitly include linux/kvm.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 33/52] apic: move target-dependent definitions to cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 34/52] include: poison symbols in osdep.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 35/52] hw: do not use VMSTATE_*TL Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 36/52] hw: move CPU state serialization to migration/cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 37/52] hw: cannot include hw/hw.h from user emulation Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 38/52] cpu: move endian-dependent load/store functions to cpu-all.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 39/52] qemu-common: stop including qemu/bswap.h from qemu-common.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 40/52] qemu-common: stop including qemu/host-utils.h " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 41/52] gdbstub: remove unnecessary includes from gdbstub-xml.c Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 42/52] dma: do not depend on kvm_enabled() Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 43/52] s390x: reorganize CSS bits between cpu.h and other headers Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 44/52] acpi: do not use TARGET_PAGE_SIZE Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 45/52] qemu-common: push cpu.h inclusion out of qemu-common.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 46/52] arm: move arm_log_exception into .c file Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 47/52] mips: move CP0 functions out of cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 48/52] hw: explicitly include qemu/log.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 49/52] exec: extract exec/tb-context.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 50/52] cpu: move exec-all.h inclusion out of cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 51/52] hw: remove pio_addr_t Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 52/52] hw: clean up hw/hw.h includes Paolo Bonzini
2016-05-19 11:59 ` [Qemu-devel] [PULL 00/52] NEED_CPU_H cleanups Peter Maydell
2016-05-19 12:08   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463656726-35952-19-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).