From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 23/52] arm: include cpu-qom.h in files that require ARMCPU
Date: Thu, 19 May 2016 13:18:17 +0200 [thread overview]
Message-ID: <1463656726-35952-24-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1463656726-35952-1-git-send-email-pbonzini@redhat.com>
This will keep things working when cpu.h will not be included
indirectly almost everywhere (either directly or through
qemu-common.h).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/arm/stm32f205_soc.c | 1 -
hw/arm/strongarm.h | 1 +
include/hw/arm/arm.h | 2 +-
include/hw/arm/exynos4210.h | 1 +
include/hw/arm/omap.h | 1 +
include/hw/arm/pxa.h | 1 +
6 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c
index a5ea1e2..9c1dafb 100644
--- a/hw/arm/stm32f205_soc.c
+++ b/hw/arm/stm32f205_soc.c
@@ -25,7 +25,6 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu-common.h"
-#include "cpu.h"
#include "hw/arm/arm.h"
#include "exec/address-spaces.h"
#include "hw/arm/stm32f205_soc.h"
diff --git a/hw/arm/strongarm.h b/hw/arm/strongarm.h
index 2893f94..cd32bbd 100644
--- a/hw/arm/strongarm.h
+++ b/hw/arm/strongarm.h
@@ -2,6 +2,7 @@
#define _STRONGARM_H
#include "exec/memory.h"
+#include "target-arm/cpu-qom.h"
#define SA_CS0 0x00000000
#define SA_CS1 0x08000000
diff --git a/include/hw/arm/arm.h b/include/hw/arm/arm.h
index b2517f9..8b49a98 100644
--- a/include/hw/arm/arm.h
+++ b/include/hw/arm/arm.h
@@ -12,9 +12,9 @@
#define ARM_MISC_H 1
#include "exec/memory.h"
+#include "target-arm/cpu-qom.h"
#include "hw/irq.h"
#include "qemu/notify.h"
-#include "cpu.h"
typedef enum {
ARM_ENDIANNESS_UNKNOWN = 0,
diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h
index 5c1820f..b6d929d 100644
--- a/include/hw/arm/exynos4210.h
+++ b/include/hw/arm/exynos4210.h
@@ -28,6 +28,7 @@
#include "qemu-common.h"
#include "exec/memory.h"
+#include "target-arm/cpu-qom.h"
#define EXYNOS4210_NCPUS 2
diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h
index 0ad5fb8..f026c8d 100644
--- a/include/hw/arm/omap.h
+++ b/include/hw/arm/omap.h
@@ -20,6 +20,7 @@
#include "exec/memory.h"
# define hw_omap_h "omap.h"
#include "hw/irq.h"
+#include "target-arm/cpu-qom.h"
# define OMAP_EMIFS_BASE 0x00000000
# define OMAP2_Q0_BASE 0x00000000
diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h
index 259b852..074feac 100644
--- a/include/hw/arm/pxa.h
+++ b/include/hw/arm/pxa.h
@@ -10,6 +10,7 @@
# define PXA_H "pxa.h"
#include "exec/memory.h"
+#include "target-arm/cpu-qom.h"
/* Interrupt numbers */
# define PXA2XX_PIC_SSP3 0
--
1.8.3.1
next prev parent reply other threads:[~2016-05-19 11:19 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-19 11:17 [Qemu-devel] [PULL 00/52] NEED_CPU_H cleanups Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 01/52] scripts: add script to build QEMU and analyze inclusions Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 02/52] s390x: move .needed functions for subsections to machine.c Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 03/52] include: move CPU-related definitions out of qemu-common.h Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 04/52] log: do not use CONFIG_USER_ONLY Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 05/52] cpu: make cpu-qom.h only include-able from cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 06/52] target-alpha: make cpu-qom.h not target specific Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 07/52] target-arm: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 08/52] target-cris: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 09/52] target-i386: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 10/52] target-lm32: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 11/52] target-m68k: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 12/52] target-microblaze: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 13/52] target-mips: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 14/52] target-ppc: do not use target_ulong in cpu-qom.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 15/52] target-ppc: do not make PowerPCCPUClass depend on target-specific symbols Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 16/52] target-ppc: make cpu-qom.h not target specific Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 17/52] target-s390x: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 18/52] target-sh4: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 19/52] target-sparc: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 20/52] target-tricore: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 21/52] target-unicore32: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 22/52] target-xtensa: " Paolo Bonzini
2016-05-19 11:18 ` Paolo Bonzini [this message]
2016-05-19 11:18 ` [Qemu-devel] [PULL 24/52] m68k: include cpu-qom.h in files that require M68KCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 25/52] sh4: include cpu-qom.h in files that require SuperHCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 26/52] alpha: include cpu-qom.h in files that require AlphaCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 27/52] mips: use MIPSCPU instead of CPUMIPSState Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 28/52] ppc: use PowerPCCPU instead of CPUPPCState Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 29/52] arm: remove useless cpu.h inclusion Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 30/52] explicitly include qom/cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 31/52] explicitly include hw/qdev-core.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 32/52] explicitly include linux/kvm.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 33/52] apic: move target-dependent definitions to cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 34/52] include: poison symbols in osdep.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 35/52] hw: do not use VMSTATE_*TL Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 36/52] hw: move CPU state serialization to migration/cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 37/52] hw: cannot include hw/hw.h from user emulation Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 38/52] cpu: move endian-dependent load/store functions to cpu-all.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 39/52] qemu-common: stop including qemu/bswap.h from qemu-common.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 40/52] qemu-common: stop including qemu/host-utils.h " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 41/52] gdbstub: remove unnecessary includes from gdbstub-xml.c Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 42/52] dma: do not depend on kvm_enabled() Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 43/52] s390x: reorganize CSS bits between cpu.h and other headers Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 44/52] acpi: do not use TARGET_PAGE_SIZE Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 45/52] qemu-common: push cpu.h inclusion out of qemu-common.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 46/52] arm: move arm_log_exception into .c file Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 47/52] mips: move CP0 functions out of cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 48/52] hw: explicitly include qemu/log.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 49/52] exec: extract exec/tb-context.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 50/52] cpu: move exec-all.h inclusion out of cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 51/52] hw: remove pio_addr_t Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 52/52] hw: clean up hw/hw.h includes Paolo Bonzini
2016-05-19 11:59 ` [Qemu-devel] [PULL 00/52] NEED_CPU_H cleanups Peter Maydell
2016-05-19 12:08 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463656726-35952-24-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).