From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 34/52] include: poison symbols in osdep.h
Date: Thu, 19 May 2016 13:18:28 +0200 [thread overview]
Message-ID: <1463656726-35952-35-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1463656726-35952-1-git-send-email-pbonzini@redhat.com>
Ensure that all target-independent files ignore poisoned symbols,
and fix the fallout.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/core/Makefile.objs | 2 +-
include/exec/cpu-common.h | 4 ----
include/exec/helper-head.h | 23 +++++++++++++----------
include/qemu/osdep.h | 2 ++
scripts/create_config | 2 +-
5 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index abb3560..70951d4 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -4,7 +4,7 @@ common-obj-y += fw-path-provider.o
# irq.o needed for qdev GPIO handling:
common-obj-y += irq.o
common-obj-y += hotplug.o
-common-obj-y += nmi.o
+obj-y += nmi.o
common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
common-obj-$(CONFIG_XILINX_AXI) += stream.o
diff --git a/include/exec/cpu-common.h b/include/exec/cpu-common.h
index 9e839e5..4f59034 100644
--- a/include/exec/cpu-common.h
+++ b/include/exec/cpu-common.h
@@ -7,10 +7,6 @@
#include "exec/hwaddr.h"
#endif
-#ifndef NEED_CPU_H
-#include "exec/poison.h"
-#endif
-
#include "qemu/bswap.h"
#include "qemu/queue.h"
#include "qemu/fprintf-fn.h"
diff --git a/include/exec/helper-head.h b/include/exec/helper-head.h
index ec79043..74f8f03 100644
--- a/include/exec/helper-head.h
+++ b/include/exec/helper-head.h
@@ -33,17 +33,9 @@
#define dh_alias_s64 i64
#define dh_alias_f32 i32
#define dh_alias_f64 i64
-#ifdef TARGET_LONG_BITS
-# if TARGET_LONG_BITS == 32
-# define dh_alias_tl i32
-# else
-# define dh_alias_tl i64
-# endif
-#endif
#define dh_alias_ptr ptr
#define dh_alias_void void
#define dh_alias_noreturn noreturn
-#define dh_alias_env ptr
#define dh_alias(t) glue(dh_alias_, t)
#define dh_ctype_i32 uint32_t
@@ -53,13 +45,24 @@
#define dh_ctype_s64 int64_t
#define dh_ctype_f32 float32
#define dh_ctype_f64 float64
-#define dh_ctype_tl target_ulong
#define dh_ctype_ptr void *
#define dh_ctype_void void
#define dh_ctype_noreturn void QEMU_NORETURN
-#define dh_ctype_env CPUArchState *
#define dh_ctype(t) dh_ctype_##t
+#ifdef NEED_CPU_H
+# ifdef TARGET_LONG_BITS
+# if TARGET_LONG_BITS == 32
+# define dh_alias_tl i32
+# else
+# define dh_alias_tl i64
+# endif
+# endif
+# define dh_alias_env ptr
+# define dh_ctype_tl target_ulong
+# define dh_ctype_env CPUArchState *
+#endif
+
/* We can't use glue() here because it falls foul of C preprocessor
recursive expansion rules. */
#define dh_retvar_decl0_void void
diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h
index 2e930a9..268ec66 100644
--- a/include/qemu/osdep.h
+++ b/include/qemu/osdep.h
@@ -30,6 +30,8 @@
#include "config-host.h"
#ifdef NEED_CPU_H
#include "config-target.h"
+#else
+#include "exec/poison.h"
#endif
#include "qemu/compiler.h"
diff --git a/scripts/create_config b/scripts/create_config
index 9cb176f..b2d2ebb 100755
--- a/scripts/create_config
+++ b/scripts/create_config
@@ -52,7 +52,7 @@ case $line in
done
echo " NULL"
;;
- CONFIG_*=y) # configuration
+ CONFIG_*='$(CONFIG_SOFTMMU)'|CONFIG_*=y) # configuration
name=${line%=*}
echo "#define $name 1"
;;
--
1.8.3.1
next prev parent reply other threads:[~2016-05-19 11:19 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-19 11:17 [Qemu-devel] [PULL 00/52] NEED_CPU_H cleanups Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 01/52] scripts: add script to build QEMU and analyze inclusions Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 02/52] s390x: move .needed functions for subsections to machine.c Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 03/52] include: move CPU-related definitions out of qemu-common.h Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 04/52] log: do not use CONFIG_USER_ONLY Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 05/52] cpu: make cpu-qom.h only include-able from cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 06/52] target-alpha: make cpu-qom.h not target specific Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 07/52] target-arm: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 08/52] target-cris: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 09/52] target-i386: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 10/52] target-lm32: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 11/52] target-m68k: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 12/52] target-microblaze: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 13/52] target-mips: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 14/52] target-ppc: do not use target_ulong in cpu-qom.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 15/52] target-ppc: do not make PowerPCCPUClass depend on target-specific symbols Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 16/52] target-ppc: make cpu-qom.h not target specific Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 17/52] target-s390x: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 18/52] target-sh4: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 19/52] target-sparc: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 20/52] target-tricore: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 21/52] target-unicore32: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 22/52] target-xtensa: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 23/52] arm: include cpu-qom.h in files that require ARMCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 24/52] m68k: include cpu-qom.h in files that require M68KCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 25/52] sh4: include cpu-qom.h in files that require SuperHCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 26/52] alpha: include cpu-qom.h in files that require AlphaCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 27/52] mips: use MIPSCPU instead of CPUMIPSState Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 28/52] ppc: use PowerPCCPU instead of CPUPPCState Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 29/52] arm: remove useless cpu.h inclusion Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 30/52] explicitly include qom/cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 31/52] explicitly include hw/qdev-core.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 32/52] explicitly include linux/kvm.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 33/52] apic: move target-dependent definitions to cpu.h Paolo Bonzini
2016-05-19 11:18 ` Paolo Bonzini [this message]
2016-05-19 11:18 ` [Qemu-devel] [PULL 35/52] hw: do not use VMSTATE_*TL Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 36/52] hw: move CPU state serialization to migration/cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 37/52] hw: cannot include hw/hw.h from user emulation Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 38/52] cpu: move endian-dependent load/store functions to cpu-all.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 39/52] qemu-common: stop including qemu/bswap.h from qemu-common.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 40/52] qemu-common: stop including qemu/host-utils.h " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 41/52] gdbstub: remove unnecessary includes from gdbstub-xml.c Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 42/52] dma: do not depend on kvm_enabled() Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 43/52] s390x: reorganize CSS bits between cpu.h and other headers Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 44/52] acpi: do not use TARGET_PAGE_SIZE Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 45/52] qemu-common: push cpu.h inclusion out of qemu-common.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 46/52] arm: move arm_log_exception into .c file Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 47/52] mips: move CP0 functions out of cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 48/52] hw: explicitly include qemu/log.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 49/52] exec: extract exec/tb-context.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 50/52] cpu: move exec-all.h inclusion out of cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 51/52] hw: remove pio_addr_t Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 52/52] hw: clean up hw/hw.h includes Paolo Bonzini
2016-05-19 11:59 ` [Qemu-devel] [PULL 00/52] NEED_CPU_H cleanups Peter Maydell
2016-05-19 12:08 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463656726-35952-35-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).