qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 35/52] hw: do not use VMSTATE_*TL
Date: Thu, 19 May 2016 13:18:29 +0200	[thread overview]
Message-ID: <1463656726-35952-36-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1463656726-35952-1-git-send-email-pbonzini@redhat.com>

Reserve this to CPU state serialization.

Luckily, they were only used by sPAPR devices and these are ppc64
only.  So there is no change to migration format.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/net/spapr_llan.c        | 8 ++++----
 hw/ppc/spapr_vio.c         | 2 +-
 include/hw/ppc/spapr_vio.h | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/hw/net/spapr_llan.c b/hw/net/spapr_llan.c
index a647f25..db97da3 100644
--- a/hw/net/spapr_llan.c
+++ b/hw/net/spapr_llan.c
@@ -106,9 +106,9 @@ typedef struct VIOsPAPRVLANDevice {
     NICConf nicconf;
     NICState *nic;
     bool isopen;
-    target_ulong buf_list;
+    hwaddr buf_list;
     uint32_t add_buf_ptr, use_buf_ptr, rx_bufs;
-    target_ulong rxq_ptr;
+    hwaddr rxq_ptr;
     uint32_t compat_flags;             /* Compatability flags for migration */
     RxBufPool *rx_pool[RX_MAX_POOLS];  /* Receive buffer descriptor pools */
 } VIOsPAPRVLANDevice;
@@ -765,11 +765,11 @@ static const VMStateDescription vmstate_spapr_llan = {
         VMSTATE_SPAPR_VIO(sdev, VIOsPAPRVLANDevice),
         /* LLAN state */
         VMSTATE_BOOL(isopen, VIOsPAPRVLANDevice),
-        VMSTATE_UINTTL(buf_list, VIOsPAPRVLANDevice),
+        VMSTATE_UINT64(buf_list, VIOsPAPRVLANDevice),
         VMSTATE_UINT32(add_buf_ptr, VIOsPAPRVLANDevice),
         VMSTATE_UINT32(use_buf_ptr, VIOsPAPRVLANDevice),
         VMSTATE_UINT32(rx_bufs, VIOsPAPRVLANDevice),
-        VMSTATE_UINTTL(rxq_ptr, VIOsPAPRVLANDevice),
+        VMSTATE_UINT64(rxq_ptr, VIOsPAPRVLANDevice),
 
         VMSTATE_END_OF_LIST()
     },
diff --git a/hw/ppc/spapr_vio.c b/hw/ppc/spapr_vio.c
index 8aa021f..6b20b40 100644
--- a/hw/ppc/spapr_vio.c
+++ b/hw/ppc/spapr_vio.c
@@ -584,7 +584,7 @@ const VMStateDescription vmstate_spapr_vio = {
         VMSTATE_UINT32_EQUAL(irq, VIOsPAPRDevice),
 
         /* General VIO device state */
-        VMSTATE_UINTTL(signal_state, VIOsPAPRDevice),
+        VMSTATE_UINT64(signal_state, VIOsPAPRDevice),
         VMSTATE_UINT64(crq.qladdr, VIOsPAPRDevice),
         VMSTATE_UINT32(crq.qsize, VIOsPAPRDevice),
         VMSTATE_UINT32(crq.qnext, VIOsPAPRDevice),
diff --git a/include/hw/ppc/spapr_vio.h b/include/hw/ppc/spapr_vio.h
index c9733e7..5f8b042 100644
--- a/include/hw/ppc/spapr_vio.h
+++ b/include/hw/ppc/spapr_vio.h
@@ -61,7 +61,7 @@ struct VIOsPAPRDevice {
     DeviceState qdev;
     uint32_t reg;
     uint32_t irq;
-    target_ulong signal_state;
+    uint64_t signal_state;
     VIOsPAPR_CRQ crq;
     AddressSpace as;
     MemoryRegion mrroot;
-- 
1.8.3.1

  parent reply	other threads:[~2016-05-19 11:19 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-19 11:17 [Qemu-devel] [PULL 00/52] NEED_CPU_H cleanups Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 01/52] scripts: add script to build QEMU and analyze inclusions Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 02/52] s390x: move .needed functions for subsections to machine.c Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 03/52] include: move CPU-related definitions out of qemu-common.h Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 04/52] log: do not use CONFIG_USER_ONLY Paolo Bonzini
2016-05-19 11:17 ` [Qemu-devel] [PULL 05/52] cpu: make cpu-qom.h only include-able from cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 06/52] target-alpha: make cpu-qom.h not target specific Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 07/52] target-arm: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 08/52] target-cris: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 09/52] target-i386: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 10/52] target-lm32: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 11/52] target-m68k: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 12/52] target-microblaze: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 13/52] target-mips: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 14/52] target-ppc: do not use target_ulong in cpu-qom.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 15/52] target-ppc: do not make PowerPCCPUClass depend on target-specific symbols Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 16/52] target-ppc: make cpu-qom.h not target specific Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 17/52] target-s390x: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 18/52] target-sh4: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 19/52] target-sparc: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 20/52] target-tricore: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 21/52] target-unicore32: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 22/52] target-xtensa: " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 23/52] arm: include cpu-qom.h in files that require ARMCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 24/52] m68k: include cpu-qom.h in files that require M68KCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 25/52] sh4: include cpu-qom.h in files that require SuperHCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 26/52] alpha: include cpu-qom.h in files that require AlphaCPU Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 27/52] mips: use MIPSCPU instead of CPUMIPSState Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 28/52] ppc: use PowerPCCPU instead of CPUPPCState Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 29/52] arm: remove useless cpu.h inclusion Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 30/52] explicitly include qom/cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 31/52] explicitly include hw/qdev-core.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 32/52] explicitly include linux/kvm.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 33/52] apic: move target-dependent definitions to cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 34/52] include: poison symbols in osdep.h Paolo Bonzini
2016-05-19 11:18 ` Paolo Bonzini [this message]
2016-05-19 11:18 ` [Qemu-devel] [PULL 36/52] hw: move CPU state serialization to migration/cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 37/52] hw: cannot include hw/hw.h from user emulation Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 38/52] cpu: move endian-dependent load/store functions to cpu-all.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 39/52] qemu-common: stop including qemu/bswap.h from qemu-common.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 40/52] qemu-common: stop including qemu/host-utils.h " Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 41/52] gdbstub: remove unnecessary includes from gdbstub-xml.c Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 42/52] dma: do not depend on kvm_enabled() Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 43/52] s390x: reorganize CSS bits between cpu.h and other headers Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 44/52] acpi: do not use TARGET_PAGE_SIZE Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 45/52] qemu-common: push cpu.h inclusion out of qemu-common.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 46/52] arm: move arm_log_exception into .c file Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 47/52] mips: move CP0 functions out of cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 48/52] hw: explicitly include qemu/log.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 49/52] exec: extract exec/tb-context.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 50/52] cpu: move exec-all.h inclusion out of cpu.h Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 51/52] hw: remove pio_addr_t Paolo Bonzini
2016-05-19 11:18 ` [Qemu-devel] [PULL 52/52] hw: clean up hw/hw.h includes Paolo Bonzini
2016-05-19 11:59 ` [Qemu-devel] [PULL 00/52] NEED_CPU_H cleanups Peter Maydell
2016-05-19 12:08   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463656726-35952-36-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).