qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, mreitz@redhat.com, berto@igalia.com,
	jcody@redhat.com, jsnow@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v2 00/14] block jobs: Convert I/O to BlockBackend
Date: Tue, 24 May 2016 15:47:20 +0200	[thread overview]
Message-ID: <1464097654-12977-1-git-send-email-kwolf@redhat.com> (raw)

This series changes the block jobs so that they have a separate BlockBackend
for every node on which they perform I/O. This doesn't only get us closer to
the goal of only doing I/O through blk_*() from external sources (and block
jobs are considered external), but can also later be used to use BlockBackend
features for jobs: One could imagine replacing the very basic job throttling by
the already existing and more advanced BlockBackend throttling, or using the
BlockBackend error handling for block jobs.

This depends on my current block branch (because of the drain fixes).

v2:
- Rebase conflict resolution, in particular:
  * bdrv_new() without parameter
  * blk_*write_zeroes() is sector based now
- Assert that all BDSes are gone after bdrv_close_all [Max, Berto]
- Don't add new sector based blk_* interfaces. Instead, blk_co_preadv/pwritev
  are made public. [Max]
- commit: Removed unnecessary cast [Max]
- commit: Use blk_* functions in commit_run() [Max]

Alberto Garcia (1):
  block: keep a list of block jobs

John Snow (1):
  backup: Pack Notifier within BackupBlockJob

Kevin Wolf (12):
  block: Cancel jobs first in bdrv_close_all()
  block: Default to enabled write cache in blk_new()
  block: Convert block job core to BlockBackend
  block: Make blk_co_preadv/pwritev() public
  stream: Use BlockBackend for I/O
  mirror: Allow target that already has a BlockBackend
  mirror: Use BlockBackend for I/O
  backup: Don't leak BackupBlockJob in error path
  backup: Remove bs parameter from backup_do_cow()
  backup: Use BlockBackend for I/O
  commit: Use BlockBackend for I/O
  blockjob: Remove BlockJob.bs

 block.c                        |  23 +--------
 block/backup.c                 |  71 ++++++++++++++--------------
 block/block-backend.c          |  24 ++++++----
 block/commit.c                 |  53 +++++++++++++--------
 block/io.c                     |  18 -------
 block/mirror.c                 | 104 +++++++++++++++++++----------------------
 block/stream.c                 |  15 +++---
 blockdev.c                     |  12 +----
 blockjob.c                     |  62 +++++++++++++++++-------
 include/block/block.h          |   4 --
 include/block/blockjob.h       |  23 ++++++++-
 include/sysemu/block-backend.h |   6 +++
 qemu-img.c                     |   2 +-
 tests/qemu-iotests/041         |  27 -----------
 tests/qemu-iotests/041.out     |   4 +-
 trace-events                   |   6 ++-
 16 files changed, 224 insertions(+), 230 deletions(-)

-- 
1.8.3.1

             reply	other threads:[~2016-05-24 13:47 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-24 13:47 Kevin Wolf [this message]
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 01/14] block: keep a list of block jobs Kevin Wolf
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 02/14] block: Cancel jobs first in bdrv_close_all() Kevin Wolf
2016-05-24 22:29   ` Eric Blake
2016-05-25 11:31   ` Alberto Garcia
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 03/14] block: Default to enabled write cache in blk_new() Kevin Wolf
2016-05-25 11:32   ` Alberto Garcia
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 04/14] block: Convert block job core to BlockBackend Kevin Wolf
2016-05-25  0:17   ` Eric Blake
2016-05-25  3:50   ` Changlong Xie
2016-05-25 11:40   ` Alberto Garcia
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 05/14] block: Make blk_co_preadv/pwritev() public Kevin Wolf
2016-05-25  0:24   ` Eric Blake
2016-05-25  9:07     ` Kevin Wolf
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 06/14] stream: Use BlockBackend for I/O Kevin Wolf
2016-05-25  0:27   ` Eric Blake
2016-05-25 11:59   ` Alberto Garcia
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 07/14] mirror: Allow target that already has a BlockBackend Kevin Wolf
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 08/14] mirror: Use BlockBackend for I/O Kevin Wolf
2016-05-25  1:48   ` Eric Blake
2016-05-25  3:51   ` Changlong Xie
2016-05-25  4:01     ` Eric Blake
2016-05-25  4:12       ` Changlong Xie
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 09/14] backup: Don't leak BackupBlockJob in error path Kevin Wolf
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 10/14] backup: Pack Notifier within BackupBlockJob Kevin Wolf
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 11/14] backup: Remove bs parameter from backup_do_cow() Kevin Wolf
2016-05-25 12:05   ` Alberto Garcia
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 12/14] backup: Use BlockBackend for I/O Kevin Wolf
2016-05-25  1:53   ` Eric Blake
2016-05-25  3:51   ` Changlong Xie
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 13/14] commit: " Kevin Wolf
2016-05-25  1:56   ` Eric Blake
2016-05-25  3:51   ` Changlong Xie
2016-05-25  4:04     ` Eric Blake
2016-05-24 13:47 ` [Qemu-devel] [PATCH v2 14/14] blockjob: Remove BlockJob.bs Kevin Wolf
2016-05-25  6:29   ` Changlong Xie
2016-05-25 11:10     ` Kevin Wolf
2016-05-25 12:05   ` Alberto Garcia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464097654-12977-1-git-send-email-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=berto@igalia.com \
    --cc=jcody@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).