From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com,
Stefan Hajnoczi <stefanha@redhat.com>,
Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH 09/13] qed: Convert to bdrv_co_pwrite_zeroes()
Date: Tue, 24 May 2016 16:25:28 -0600 [thread overview]
Message-ID: <1464128732-12667-10-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1464128732-12667-1-git-send-email-eblake@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
Kill an abuse of the comma operator while at it (fortunately,
the semantics were still right).
Signed-off-by: Eric Blake <eblake@redhat.com>
---
block/qed.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/block/qed.c b/block/qed.c
index 0ab5b40..a0be886 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -1419,7 +1419,7 @@ typedef struct {
bool done;
} QEDWriteZeroesCB;
-static void coroutine_fn qed_co_write_zeroes_cb(void *opaque, int ret)
+static void coroutine_fn qed_co_pwrite_zeroes_cb(void *opaque, int ret)
{
QEDWriteZeroesCB *cb = opaque;
@@ -1430,10 +1430,10 @@ static void coroutine_fn qed_co_write_zeroes_cb(void *opaque, int ret)
}
}
-static int coroutine_fn bdrv_qed_co_write_zeroes(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors,
- BdrvRequestFlags flags)
+static int coroutine_fn bdrv_qed_co_pwrite_zeroes(BlockDriverState *bs,
+ int64_t offset,
+ int count,
+ BdrvRequestFlags flags)
{
BlockAIOCB *blockacb;
BDRVQEDState *s = bs->opaque;
@@ -1443,10 +1443,10 @@ static int coroutine_fn bdrv_qed_co_write_zeroes(BlockDriverState *bs,
/* Refuse if there are untouched backing file sectors */
if (bs->backing) {
- if (qed_offset_into_cluster(s, sector_num * BDRV_SECTOR_SIZE) != 0) {
+ if (qed_offset_into_cluster(s, offset) != 0) {
return -ENOTSUP;
}
- if (qed_offset_into_cluster(s, nb_sectors * BDRV_SECTOR_SIZE) != 0) {
+ if (qed_offset_into_cluster(s, count) != 0) {
return -ENOTSUP;
}
}
@@ -1454,12 +1454,13 @@ static int coroutine_fn bdrv_qed_co_write_zeroes(BlockDriverState *bs,
/* Zero writes start without an I/O buffer. If a buffer becomes necessary
* then it will be allocated during request processing.
*/
- iov.iov_base = NULL,
- iov.iov_len = nb_sectors * BDRV_SECTOR_SIZE,
+ iov.iov_base = NULL;
+ iov.iov_len = count;
qemu_iovec_init_external(&qiov, &iov, 1);
- blockacb = qed_aio_setup(bs, sector_num, &qiov, nb_sectors,
- qed_co_write_zeroes_cb, &cb,
+ blockacb = qed_aio_setup(bs, offset >> BDRV_SECTOR_BITS, &qiov,
+ count >> BDRV_SECTOR_BITS,
+ qed_co_pwrite_zeroes_cb, &cb,
QED_AIOCB_WRITE | QED_AIOCB_ZERO);
if (!blockacb) {
return -EIO;
@@ -1664,7 +1665,7 @@ static BlockDriver bdrv_qed = {
.bdrv_co_get_block_status = bdrv_qed_co_get_block_status,
.bdrv_aio_readv = bdrv_qed_aio_readv,
.bdrv_aio_writev = bdrv_qed_aio_writev,
- .bdrv_co_write_zeroes = bdrv_qed_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = bdrv_qed_co_pwrite_zeroes,
.bdrv_truncate = bdrv_qed_truncate,
.bdrv_getlength = bdrv_qed_getlength,
.bdrv_get_info = bdrv_qed_get_info,
--
2.5.5
next prev parent reply other threads:[~2016-05-24 22:25 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 22:25 [Qemu-devel] [PATCH 00/13] Kill sector-based write_zeroes Eric Blake
2016-05-24 22:25 ` [Qemu-devel] [PATCH 01/13] block: Rename blk_write_zeroes() Eric Blake
2016-05-24 22:25 ` [Qemu-devel] [PATCH 02/13] block: Track write zero limits in bytes Eric Blake
2016-05-25 10:30 ` Kevin Wolf
2016-05-25 11:21 ` Eric Blake
2016-05-24 22:25 ` [Qemu-devel] [PATCH 03/13] block: Add .bdrv_co_pwrite_zeroes() Eric Blake
2016-05-25 13:02 ` Kevin Wolf
2016-05-24 22:25 ` [Qemu-devel] [PATCH 04/13] block: Switch bdrv_write_zeroes() to byte interface Eric Blake
2016-05-25 13:18 ` Kevin Wolf
2016-05-24 22:25 ` [Qemu-devel] [PATCH 05/13] iscsi: Convert to bdrv_co_pwrite_zeroes() Eric Blake
2016-05-25 13:34 ` Kevin Wolf
2016-06-01 16:33 ` Eric Blake
2016-05-24 22:25 ` [Qemu-devel] [PATCH 06/13] qcow2: " Eric Blake
2016-05-25 13:53 ` Kevin Wolf
2016-05-24 22:25 ` [Qemu-devel] [PATCH 07/13] blkreplay: " Eric Blake
2016-05-25 13:54 ` Kevin Wolf
2016-05-24 22:25 ` [Qemu-devel] [PATCH 08/13] gluster: " Eric Blake
2016-05-25 13:57 ` Kevin Wolf
2016-05-24 22:25 ` Eric Blake [this message]
2016-05-25 14:07 ` [Qemu-devel] [PATCH 09/13] qed: " Kevin Wolf
2016-05-25 14:28 ` Eric Blake
2016-05-25 15:06 ` Kevin Wolf
2016-05-24 22:25 ` [Qemu-devel] [PATCH 10/13] raw-posix: " Eric Blake
2016-05-25 14:20 ` Kevin Wolf
2016-05-24 22:25 ` [Qemu-devel] [PATCH 11/13] raw_bsd: " Eric Blake
2016-05-25 14:20 ` Kevin Wolf
2016-05-24 22:25 ` [Qemu-devel] [PATCH 12/13] vmdk: " Eric Blake
2016-05-25 14:23 ` Kevin Wolf
2016-05-25 14:35 ` Eric Blake
2016-05-24 22:25 ` [Qemu-devel] [PATCH 13/13] block: Kill bdrv_co_write_zeroes() Eric Blake
2016-05-25 14:24 ` Kevin Wolf
2016-05-25 11:02 ` [Qemu-devel] [PATCH 00/13] Kill sector-based write_zeroes Kevin Wolf
2016-06-01 15:35 ` Kevin Wolf
2016-06-01 15:38 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464128732-12667-10-git-send-email-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).