From: David Gibson <david@gibson.dropbear.id.au>
To: peter.maydell@linaro.org
Cc: agraf@suse.de, qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
Richard Henderson <rth@twiddle.net>,
David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PULL 04/13] target-ppc: Cleanups to rldinm, rldnm, rldimi
Date: Fri, 27 May 2016 13:04:49 +1000 [thread overview]
Message-ID: <1464318298-2456-5-git-send-email-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <1464318298-2456-1-git-send-email-david@gibson.dropbear.id.au>
From: Richard Henderson <rth@twiddle.net>
Mirror the cleanups just done to rlwinm, rlwnm and rlwimi.
This adds use of deposit to rldimi.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
target-ppc/translate.c | 91 +++++++++++++++++++++++++-------------------------
1 file changed, 46 insertions(+), 45 deletions(-)
diff --git a/target-ppc/translate.c b/target-ppc/translate.c
index b392ecc..f5ceae5 100644
--- a/target-ppc/translate.c
+++ b/target-ppc/translate.c
@@ -1747,26 +1747,24 @@ static void glue(gen_, name##3)(DisasContext *ctx) \
gen_##name(ctx, 1, 1); \
}
-static inline void gen_rldinm(DisasContext *ctx, uint32_t mb, uint32_t me,
- uint32_t sh)
+static void gen_rldinm(DisasContext *ctx, int mb, int me, int sh)
{
- if (likely(sh != 0 && mb == 0 && me == (63 - sh))) {
- tcg_gen_shli_tl(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rS(ctx->opcode)], sh);
- } else if (likely(sh != 0 && me == 63 && sh == (64 - mb))) {
- tcg_gen_shri_tl(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rS(ctx->opcode)], mb);
+ TCGv t_ra = cpu_gpr[rA(ctx->opcode)];
+ TCGv t_rs = cpu_gpr[rS(ctx->opcode)];
+
+ if (sh != 0 && mb == 0 && me == (63 - sh)) {
+ tcg_gen_shli_tl(t_ra, t_rs, sh);
+ } else if (sh != 0 && me == 63 && sh == (64 - mb)) {
+ tcg_gen_shri_tl(t_ra, t_rs, mb);
} else {
- TCGv t0 = tcg_temp_new();
- tcg_gen_rotli_tl(t0, cpu_gpr[rS(ctx->opcode)], sh);
- if (likely(mb == 0 && me == 63)) {
- tcg_gen_mov_tl(cpu_gpr[rA(ctx->opcode)], t0);
- } else {
- tcg_gen_andi_tl(cpu_gpr[rA(ctx->opcode)], t0, MASK(mb, me));
- }
- tcg_temp_free(t0);
+ tcg_gen_rotli_tl(t_ra, t_rs, sh);
+ tcg_gen_andi_tl(t_ra, t_ra, MASK(mb, me));
+ }
+ if (unlikely(Rc(ctx->opcode) != 0)) {
+ gen_set_Rc0(ctx, t_ra);
}
- if (unlikely(Rc(ctx->opcode) != 0))
- gen_set_Rc0(ctx, cpu_gpr[rA(ctx->opcode)]);
}
+
/* rldicl - rldicl. */
static inline void gen_rldicl(DisasContext *ctx, int mbn, int shn)
{
@@ -1777,6 +1775,7 @@ static inline void gen_rldicl(DisasContext *ctx, int mbn, int shn)
gen_rldinm(ctx, mb, 63, sh);
}
GEN_PPC64_R4(rldicl, 0x1E, 0x00);
+
/* rldicr - rldicr. */
static inline void gen_rldicr(DisasContext *ctx, int men, int shn)
{
@@ -1787,6 +1786,7 @@ static inline void gen_rldicr(DisasContext *ctx, int men, int shn)
gen_rldinm(ctx, 0, me, sh);
}
GEN_PPC64_R4(rldicr, 0x1E, 0x02);
+
/* rldic - rldic. */
static inline void gen_rldic(DisasContext *ctx, int mbn, int shn)
{
@@ -1798,21 +1798,22 @@ static inline void gen_rldic(DisasContext *ctx, int mbn, int shn)
}
GEN_PPC64_R4(rldic, 0x1E, 0x04);
-static inline void gen_rldnm(DisasContext *ctx, uint32_t mb, uint32_t me)
+static void gen_rldnm(DisasContext *ctx, int mb, int me)
{
+ TCGv t_ra = cpu_gpr[rA(ctx->opcode)];
+ TCGv t_rs = cpu_gpr[rS(ctx->opcode)];
+ TCGv t_rb = cpu_gpr[rB(ctx->opcode)];
TCGv t0;
t0 = tcg_temp_new();
- tcg_gen_andi_tl(t0, cpu_gpr[rB(ctx->opcode)], 0x3f);
- tcg_gen_rotl_tl(t0, cpu_gpr[rS(ctx->opcode)], t0);
- if (unlikely(mb != 0 || me != 63)) {
- tcg_gen_andi_tl(cpu_gpr[rA(ctx->opcode)], t0, MASK(mb, me));
- } else {
- tcg_gen_mov_tl(cpu_gpr[rA(ctx->opcode)], t0);
- }
+ tcg_gen_andi_tl(t0, t_rb, 0x3f);
+ tcg_gen_rotl_tl(t_ra, t_rs, t0);
tcg_temp_free(t0);
- if (unlikely(Rc(ctx->opcode) != 0))
- gen_set_Rc0(ctx, cpu_gpr[rA(ctx->opcode)]);
+
+ tcg_gen_andi_tl(t_ra, t_ra, MASK(mb, me));
+ if (unlikely(Rc(ctx->opcode) != 0)) {
+ gen_set_Rc0(ctx, t_ra);
+ }
}
/* rldcl - rldcl. */
@@ -1824,6 +1825,7 @@ static inline void gen_rldcl(DisasContext *ctx, int mbn)
gen_rldnm(ctx, mb, 63);
}
GEN_PPC64_R2(rldcl, 0x1E, 0x08);
+
/* rldcr - rldcr. */
static inline void gen_rldcr(DisasContext *ctx, int men)
{
@@ -1833,32 +1835,31 @@ static inline void gen_rldcr(DisasContext *ctx, int men)
gen_rldnm(ctx, 0, me);
}
GEN_PPC64_R2(rldcr, 0x1E, 0x09);
+
/* rldimi - rldimi. */
-static inline void gen_rldimi(DisasContext *ctx, int mbn, int shn)
+static void gen_rldimi(DisasContext *ctx, int mbn, int shn)
{
- uint32_t sh, mb, me;
+ TCGv t_ra = cpu_gpr[rA(ctx->opcode)];
+ TCGv t_rs = cpu_gpr[rS(ctx->opcode)];
+ uint32_t sh = SH(ctx->opcode) | (shn << 5);
+ uint32_t mb = MB(ctx->opcode) | (mbn << 5);
+ uint32_t me = 63 - sh;
- sh = SH(ctx->opcode) | (shn << 5);
- mb = MB(ctx->opcode) | (mbn << 5);
- me = 63 - sh;
- if (unlikely(sh == 0 && mb == 0)) {
- tcg_gen_mov_tl(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rS(ctx->opcode)]);
+ if (mb <= me) {
+ tcg_gen_deposit_tl(t_ra, t_ra, t_rs, sh, me - mb + 1);
} else {
- TCGv t0, t1;
- target_ulong mask;
+ target_ulong mask = MASK(mb, me);
+ TCGv t1 = tcg_temp_new();
- t0 = tcg_temp_new();
- tcg_gen_rotli_tl(t0, cpu_gpr[rS(ctx->opcode)], sh);
- t1 = tcg_temp_new();
- mask = MASK(mb, me);
- tcg_gen_andi_tl(t0, t0, mask);
- tcg_gen_andi_tl(t1, cpu_gpr[rA(ctx->opcode)], ~mask);
- tcg_gen_or_tl(cpu_gpr[rA(ctx->opcode)], t0, t1);
- tcg_temp_free(t0);
+ tcg_gen_rotli_tl(t1, t_rs, sh);
+ tcg_gen_andi_tl(t1, t1, mask);
+ tcg_gen_andi_tl(t_ra, t_ra, ~mask);
+ tcg_gen_or_tl(t_ra, t_ra, t1);
tcg_temp_free(t1);
}
- if (unlikely(Rc(ctx->opcode) != 0))
- gen_set_Rc0(ctx, cpu_gpr[rA(ctx->opcode)]);
+ if (unlikely(Rc(ctx->opcode) != 0)) {
+ gen_set_Rc0(ctx, t_ra);
+ }
}
GEN_PPC64_R4(rldimi, 0x1E, 0x06);
#endif
--
2.5.5
next prev parent reply other threads:[~2016-05-27 3:05 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-27 3:04 [Qemu-devel] [PULL 00/13] ppc-for-2.7 queue 20160527 David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 01/13] target-ppc: Correct KVM synchronization for ppc_hash64_set_external_hpt() David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 02/13] target-ppc: Use movcond in isel David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 03/13] target-ppc: Use 32-bit rotate instead of deposit + 64-bit rotate David Gibson
2016-06-15 12:17 ` Anton Blanchard
2016-06-16 5:19 ` David Gibson
2016-06-16 19:04 ` Richard Henderson
2016-06-17 14:27 ` Anton Blanchard
2016-06-18 4:02 ` Anton Blanchard
2016-06-18 5:10 ` Richard Henderson
2016-06-20 8:21 ` Thomas Huth
2016-06-20 8:56 ` Peter Maydell
2016-06-20 9:08 ` Thomas Huth
2016-05-27 3:04 ` David Gibson [this message]
2016-05-27 3:04 ` [Qemu-devel] [PULL 05/13] hw/net/spapr_llan: Delay flushing of the RX queue while adding new RX buffers David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 06/13] hw/net/spapr_llan: Provide counter with dropped rx frames to the guest David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 07/13] Added negative check for get_image_size() David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 08/13] PPC/KVM: early validation of vcpu id David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 09/13] spapr: ensure device trees are always associated with DRC David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 10/13] spapr_pci: Use correct DMA LIOBN when composing the device tree David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 11/13] spapr_iommu: Finish renaming vfio_accel to need_vfio David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 12/13] spapr_iommu: Move table allocation to helpers David Gibson
2016-05-27 3:04 ` [Qemu-devel] [PULL 13/13] MAINTAINERS: Add David Gibson as ppc maintainer David Gibson
2016-05-27 9:56 ` [Qemu-devel] [PULL 00/13] ppc-for-2.7 queue 20160527 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464318298-2456-5-git-send-email-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=agraf@suse.de \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).