From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 29/31] exec: remove ram_addr argument from qemu_ram_block_from_host
Date: Fri, 27 May 2016 12:06:42 +0200 [thread overview]
Message-ID: <1464343604-517-30-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1464343604-517-1-git-send-email-pbonzini@redhat.com>
Of the two callers, one does not use it, and the other can compute
it itself based on the other output argument (offset) and the RAMBlock.
Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
exec.c | 13 ++++++-------
include/exec/cpu-common.h | 2 +-
migration/postcopy-ram.c | 3 +--
3 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/exec.c b/exec.c
index 3330e7d..65bad53 100644
--- a/exec.c
+++ b/exec.c
@@ -1897,16 +1897,16 @@ static void *qemu_ram_ptr_length(RAMBlock *ram_block, ram_addr_t addr,
* ram_addr_t.
*/
RAMBlock *qemu_ram_block_from_host(void *ptr, bool round_offset,
- ram_addr_t *ram_addr,
ram_addr_t *offset)
{
RAMBlock *block;
uint8_t *host = ptr;
if (xen_enabled()) {
+ ram_addr_t ram_addr;
rcu_read_lock();
- *ram_addr = xen_ram_addr_from_mapcache(ptr);
- block = qemu_get_ram_block(*ram_addr);
+ ram_addr = xen_ram_addr_from_mapcache(ptr);
+ block = qemu_get_ram_block(ram_addr);
if (block) {
*offset = (host - block->host);
}
@@ -1938,7 +1938,6 @@ found:
if (round_offset) {
*offset &= TARGET_PAGE_MASK;
}
- *ram_addr = block->offset + *offset;
rcu_read_unlock();
return block;
}
@@ -1968,10 +1967,10 @@ RAMBlock *qemu_ram_block_by_name(const char *name)
MemoryRegion *qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr)
{
RAMBlock *block;
- ram_addr_t offset; /* Not used */
-
- block = qemu_ram_block_from_host(ptr, false, ram_addr, &offset);
+ ram_addr_t offset;
+ block = qemu_ram_block_from_host(ptr, false, &offset);
+ *ram_addr = block->offset + offset;
if (!block) {
return NULL;
}
diff --git a/include/exec/cpu-common.h b/include/exec/cpu-common.h
index a2c3b92..fc609ad 100644
--- a/include/exec/cpu-common.h
+++ b/include/exec/cpu-common.h
@@ -60,7 +60,7 @@ void qemu_ram_remap(ram_addr_t addr, ram_addr_t length);
MemoryRegion *qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr);
RAMBlock *qemu_ram_block_by_name(const char *name);
RAMBlock *qemu_ram_block_from_host(void *ptr, bool round_offset,
- ram_addr_t *ram_addr, ram_addr_t *offset);
+ ram_addr_t *offset);
void qemu_ram_set_idstr(RAMBlock *block, const char *name, DeviceState *dev);
void qemu_ram_unset_idstr(RAMBlock *block);
const char *qemu_ram_get_idstr(RAMBlock *rb);
diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c
index fbd0064..cf7dcd2 100644
--- a/migration/postcopy-ram.c
+++ b/migration/postcopy-ram.c
@@ -407,7 +407,6 @@ static void *postcopy_ram_fault_thread(void *opaque)
while (true) {
ram_addr_t rb_offset;
- ram_addr_t in_raspace;
struct pollfd pfd[2];
/*
@@ -459,7 +458,7 @@ static void *postcopy_ram_fault_thread(void *opaque)
rb = qemu_ram_block_from_host(
(void *)(uintptr_t)msg.arg.pagefault.address,
- true, &in_raspace, &rb_offset);
+ true, &rb_offset);
if (!rb) {
error_report("postcopy_ram_fault_thread: Fault outside guest: %"
PRIx64, (uint64_t)msg.arg.pagefault.address);
--
2.5.5
next prev parent reply other threads:[~2016-05-27 10:07 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-27 10:06 [Qemu-devel] [PULL 00/31] Misc changes for 2016-05-27 Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 01/31] Add optionrom compatible with fw_cfg DMA version Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 02/31] Revert "memory: Drop FlatRange.romd_mode" Paolo Bonzini
2016-05-27 10:51 ` Laszlo Ersek
2016-05-27 10:06 ` [Qemu-devel] [PULL 03/31] hw/char: QOM'ify escc.c Paolo Bonzini
2016-05-31 22:13 ` Mark Cave-Ayland
2016-06-01 3:06 ` xiaoqiang zhao
2016-06-01 7:04 ` Mark Cave-Ayland
2016-06-01 7:08 ` xiaoqiang zhao
2016-05-27 10:06 ` [Qemu-devel] [PULL 04/31] hw/char: QOM'ify etraxfs_ser.c Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 05/31] hw/char: QOM'ify lm32_juart.c Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 06/31] hw/char: QOM'ify lm32_uart.c Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 07/31] hw/char: QOM'ify milkymist-uart.c Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 08/31] nbd: Don't trim unrequested bytes Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 09/31] kvm_stat: Remove Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 10/31] scsi: pvscsi: check command descriptor ring buffer size (CVE-2016-4952) Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 11/31] scsi: mptsas: infinite loop while fetching requests Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 12/31] scsi: megasas: use appropriate property buffer size Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 13/31] scsi: megasas: initialise local configuration data buffer Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 14/31] scsi: megasas: check 'read_queue_head' index value Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 15/31] block/iscsi: avoid potential overflow of acb->task->cdb Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 16/31] bt: rewrite csrhci_write to avoid out-of-bounds writes Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 17/31] docs/atomics: update atomic_read/set comparison with Linux Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 18/31] atomics: emit an smp_read_barrier_depends() barrier only for Alpha and Thread Sanitizer Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 19/31] atomics: do not emit consume barrier for atomic_rcu_read Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 20/31] docs/atomics: update comparison with Linux Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 21/31] xen-hvm: ignore background I/O sections Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 22/31] scsi-disk: introduce a common base class Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 23/31] scsi-disk: introduce dma_readv and dma_writev Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 24/31] scsi-disk: add need_fua_emulation to SCSIDiskClass Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 25/31] scsi-disk: introduce scsi_disk_req_check_error Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 26/31] scsi-block: always use SG_IO Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 27/31] scsi-generic: Merge block max xfer len in INQUIRY response Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 28/31] memory: remove qemu_get_ram_fd, qemu_set_ram_fd, qemu_ram_block_host_ptr Paolo Bonzini
2016-05-27 10:06 ` Paolo Bonzini [this message]
2016-05-27 10:06 ` [Qemu-devel] [PULL 30/31] memory: split memory_region_from_host from qemu_ram_addr_from_host Paolo Bonzini
2016-05-27 10:06 ` [Qemu-devel] [PULL 31/31] exec: hide mr->ram_addr from qemu_get_ram_ptr users Paolo Bonzini
2016-05-27 12:53 ` [Qemu-devel] [PULL 00/31] Misc changes for 2016-05-27 Peter Maydell
2016-05-27 13:04 ` Peter Maydell
2016-05-27 13:38 ` Richard W.M. Jones
2016-05-27 14:04 ` Peter Maydell
2016-05-27 14:07 ` Paolo Bonzini
2016-05-27 14:06 ` Paolo Bonzini
2016-05-27 14:11 ` Richard W.M. Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464343604-517-30-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).