From: Marcel Apfelbaum <marcel@redhat.com>
To: qemu-devel@nongnu.org
Cc: marcel@redhat.com, mst@redhat.com, imammedo@redhat.com,
pbonzini@redhat.com, ehabkost@redhat.com
Subject: [Qemu-devel] [PATCH RFC 6/7] hw/acpi: extend acpi pci hotplug support for pci express
Date: Tue, 31 May 2016 20:48:37 +0300 [thread overview]
Message-ID: <1464716918-29689-7-git-send-email-marcel@redhat.com> (raw)
In-Reply-To: <1464716918-29689-1-git-send-email-marcel@redhat.com>
Emit acpi code for pci hotplug on all PC machines:
- if legacy pci hotpug is enabled (pcihp_bridge_en)
- if there is at least one legacy pci bridge in current system
- for PCI buses only (skip PCIe buses)
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
---
hw/i386/acpi-build.c | 49 ++++++++++++++++++++++++++++++++-----------------
1 file changed, 32 insertions(+), 17 deletions(-)
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 8ae3e53..cc51f9e 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -250,6 +250,11 @@ static void acpi_get_pci_info(PcPciInfo *info)
NULL);
}
+static void acpi_test_pci_bus(PCIBus *bus, void *opaque)
+{
+ *(bool *)opaque |= !pci_bus_is_express(bus);
+}
+
#define ACPI_PORT_SMI_CMD 0x00b2 /* TODO: this is APM_CNT_IOPORT */
static void acpi_align_size(GArray *blob, unsigned align)
@@ -422,7 +427,7 @@ static void *acpi_set_bsel(PCIBus *bus, void *opaque)
unsigned *bsel_alloc = opaque;
unsigned *bus_bsel;
- if (qbus_is_hotpluggable(BUS(bus))) {
+ if (qbus_is_hotpluggable(BUS(bus)) && !pci_bus_is_express(bus)) {
bus_bsel = g_malloc(sizeof *bus_bsel);
*bus_bsel = (*bsel_alloc)++;
@@ -433,15 +438,12 @@ static void *acpi_set_bsel(PCIBus *bus, void *opaque)
return bsel_alloc;
}
-static void acpi_set_pci_info(void)
+static void acpi_set_pci_info(PCIBus *bus)
{
- PCIBus *bus = find_i440fx(); /* TODO: Q35 support */
unsigned bsel_alloc = 0;
- if (bus) {
- /* Scan all PCI buses. Set property to enable acpi based hotplug. */
- pci_for_each_bus_depth_first(bus, acpi_set_bsel, NULL, &bsel_alloc);
- }
+ /* Scan all PCI buses. Set property to enable acpi based hotplug. */
+ pci_for_each_bus_depth_first(bus, acpi_set_bsel, NULL, &bsel_alloc);
}
static void build_append_pcihp_notify_entry(Aml *method, int slot)
@@ -503,7 +505,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus,
* In this case they aren't themselves hot-pluggable.
* Hotplugged bridges *are* hot-pluggable.
*/
- bridge_in_acpi = pc->is_bridge && pcihp_bridge_en &&
+ bridge_in_acpi = pc->is_bridge && !pc->is_express && pcihp_bridge_en &&
!DEVICE(pdev)->hotplugged;
hotplug_enabled_dev = bsel && dc->hotpluggable && !bridge_in_acpi;
@@ -1892,7 +1894,7 @@ static void build_piix4_isa_bridge(Aml *table)
aml_append(table, scope);
}
-static void build_piix4_pci_hotplug(Aml *table)
+static void build_acpi_pci_hotplug(Aml *table)
{
Aml *scope;
Aml *field;
@@ -1995,6 +1997,7 @@ build_dsdt(GArray *table_data, GArray *linker,
uint32_t nr_mem = machine->ram_slots;
int root_bus_limit = 0xFF;
PCIBus *root_bus = NULL;
+ bool has_pci_bus = false;
int i;
dsdt = init_aml_allocator();
@@ -2016,7 +2019,6 @@ build_dsdt(GArray *table_data, GArray *linker,
build_piix4_pm(dsdt);
build_piix4_isa_bridge(dsdt);
build_isa_devices_aml(dsdt);
- build_piix4_pci_hotplug(dsdt);
build_piix4_pci0_int(dsdt);
} else {
sb_scope = aml_scope("_SB");
@@ -2040,6 +2042,11 @@ build_dsdt(GArray *table_data, GArray *linker,
root_bus = PC_MACHINE(machine)->bus;
assert(root_bus);
+ pci_for_each_bus(root_bus, acpi_test_pci_bus, &has_pci_bus);
+ if (pm->pcihp_bridge_en && has_pci_bus) {
+ build_acpi_pci_hotplug(dsdt);
+ }
+
build_cpu_hotplug_aml(dsdt);
build_memory_hotplug_aml(dsdt, nr_mem, pm->mem_hp_io_base,
pm->mem_hp_io_len);
@@ -2050,7 +2057,7 @@ build_dsdt(GArray *table_data, GArray *linker,
aml_append(scope, aml_method("_L00", 0, AML_NOTSERIALIZED));
- if (misc->is_piix4) {
+ if (pm->pcihp_bridge_en && has_pci_bus) {
method = aml_method("_E01", 0, AML_NOTSERIALIZED);
aml_append(method,
aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF));
@@ -2188,7 +2195,7 @@ build_dsdt(GArray *table_data, GArray *linker,
g_ptr_array_free(mem_ranges, true);
/* reserve PCIHP resources */
- if (pm->pcihp_io_len) {
+ if (pm->pcihp_bridge_en && has_pci_bus && pm->pcihp_io_len) {
dev = aml_device("PHPR");
aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A06")));
aml_append(dev,
@@ -2326,10 +2333,14 @@ build_dsdt(GArray *table_data, GArray *linker,
{
Aml *scope = aml_scope("PCI0");
+ bool scope_used = false;
- /* Scan all PCI buses. Generate tables to support hotplug. */
- build_append_pci_bus_devices(scope, root_bus,
- pm->pcihp_bridge_en);
+ if (pm->pcihp_bridge_en && has_pci_bus) {
+ /* Scan all PCI buses. Generate tables to support hotplug. */
+ build_append_pci_bus_devices(scope, root_bus,
+ pm->pcihp_bridge_en);
+ scope_used = true;
+ }
if (misc->tpm_version != TPM_VERSION_UNSPEC) {
dev = aml_device("ISA.TPM");
@@ -2346,8 +2357,12 @@ build_dsdt(GArray *table_data, GArray *linker,
/* aml_append(crs, aml_irq_no_flags(TPM_TIS_IRQ)); */
aml_append(dev, aml_name_decl("_CRS", crs));
aml_append(scope, dev);
+ scope_used = true;
+ }
+
+ if (scope_used) {
+ aml_append(sb_scope, scope);
}
- aml_append(sb_scope, scope);
}
aml_append(dsdt, sb_scope);
}
@@ -2870,7 +2885,7 @@ void acpi_setup(void)
build_state = g_malloc0(sizeof *build_state);
- acpi_set_pci_info();
+ acpi_set_pci_info(pcms->bus);
acpi_build_tables_init(&tables);
acpi_build(&tables, MACHINE(pcms));
--
2.4.3
next prev parent reply other threads:[~2016-05-31 17:48 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-31 17:48 [Qemu-devel] [PATCH RFC 0/7] q35: add legacy pci acpi hotplug support Marcel Apfelbaum
2016-05-31 17:48 ` [Qemu-devel] [PATCH RFC 1/7] hw/acpi: remove dead acpi code Marcel Apfelbaum
2016-06-17 7:57 ` Igor Mammedov
2016-05-31 17:48 ` [Qemu-devel] [PATCH RFC 2/7] hw/acpi: simplify dsdt building code Marcel Apfelbaum
2016-06-17 8:39 ` Igor Mammedov
2016-05-31 17:48 ` [Qemu-devel] [PATCH RFC 3/7] hw/acpi: fix a DSDT table issue when a pxb is present Marcel Apfelbaum
2016-06-17 8:57 ` Igor Mammedov
2016-06-21 8:50 ` Marcel Apfelbaum
2016-05-31 17:48 ` [Qemu-devel] [PATCH RFC 4/7] hw/apci: fix pcihp io initialization Marcel Apfelbaum
2016-06-17 9:04 ` Igor Mammedov
2016-06-21 8:57 ` Marcel Apfelbaum
2016-06-21 11:19 ` Igor Mammedov
2016-06-21 11:50 ` Marcel Apfelbaum
2016-05-31 17:48 ` [Qemu-devel] [PATCH RFC 5/7] hw/acpi: prepare pci hotplug IO for ich9 Marcel Apfelbaum
2016-05-31 17:48 ` Marcel Apfelbaum [this message]
2016-06-20 14:11 ` [Qemu-devel] [PATCH RFC 6/7] hw/acpi: extend acpi pci hotplug support for pci express Igor Mammedov
2016-06-21 9:05 ` Marcel Apfelbaum
2016-06-21 11:28 ` Igor Mammedov
2016-06-21 11:47 ` Marcel Apfelbaum
2016-06-21 12:19 ` Igor Mammedov
2016-05-31 17:48 ` [Qemu-devel] [PATCH RFC 7/7] hw/ich9: enable pci acpi hotplug Marcel Apfelbaum
2016-06-20 14:27 ` Igor Mammedov
2016-06-21 9:06 ` Marcel Apfelbaum
2016-06-21 11:30 ` Igor Mammedov
2016-06-21 11:48 ` Marcel Apfelbaum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464716918-29689-7-git-send-email-marcel@redhat.com \
--to=marcel@redhat.com \
--cc=ehabkost@redhat.com \
--cc=imammedo@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).