qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Vivier <laurent@vivier.eu>
To: Riku Voipio <riku.voipio@iki.fi>
Cc: qemu-devel@nongnu.org, Peter Maydell <peter.maydell@linaro.org>,
	Laurent Vivier <laurent@vivier.eu>
Subject: [Qemu-devel] [PATCH] linux-user: check if NETLINK_ROUTE is available
Date: Thu,  2 Jun 2016 22:14:15 +0200	[thread overview]
Message-ID: <1464898455-10082-1-git-send-email-laurent@vivier.eu> (raw)

Some IFLA_* symbols can be missing in the host linux/if_link.h,
but as they are enums and not "#defines", check in "configure" if
last known  (IFLA_PROTO_DOWN) is available and if not, disable
management of NETLINK_ROUTE protocol.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
Note:
   This patch must be applied on top of the series:
   [PATCH v2 0/3] linux-user: netlink support

 configure            | 15 +++++++++++++++
 linux-user/syscall.c | 18 ++++++++++++++----
 2 files changed, 29 insertions(+), 4 deletions(-)

diff --git a/configure b/configure
index b5aab72..294d791 100755
--- a/configure
+++ b/configure
@@ -4526,6 +4526,17 @@ if compile_prog "" "" ; then
     have_fsxattr=yes
 fi
 
+have_rtnetlink=no
+cat > $TMPC << EOF
+#include <linux/rtnetlink.h>
+int main(void) {
+  return IFLA_PROTO_DOWN;
+}
+EOF
+if compile_prog "" "" ; then
+    have_rtnetlink=yes
+fi
+
 ##########################################
 # End of CC checks
 # After here, no more $cc or $ld runs
@@ -5461,6 +5472,10 @@ if test "$rdma" = "yes" ; then
   echo "CONFIG_RDMA=y" >> $config_host_mak
 fi
 
+if test "$have_rtnetlink" = "yes" ; then
+  echo "CONFIG_RTNETLINK=y" >> $config_host_mak
+fi
+
 # Hold two types of flag:
 #   CONFIG_THREAD_SETNAME_BYTHREAD  - we've got a way of setting the name on
 #                                     a thread we have a handle to
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index da48ba4..7c88d63 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -104,7 +104,9 @@ int __clone2(int (*fn)(void *), void *child_stack_base,
 #include "linux_loop.h"
 #include <linux/if_packet.h>
 #include <linux/netlink.h>
+#ifdef CONFIG_RTNETLINK
 #include <linux/rtnetlink.h>
+#endif
 #include <linux/audit.h>
 #include "uname.h"
 
@@ -1629,6 +1631,7 @@ static abi_long target_to_host_for_each_nlmsg(struct nlmsghdr *nlh,
     return 0;
 }
 
+#ifdef CONFIG_RTNETLINK
 static abi_long host_to_target_for_each_rtattr(struct rtattr *rtattr,
                                                size_t len,
                                                abi_long (*host_to_target_rtattr)
@@ -2043,6 +2046,7 @@ static abi_long target_to_host_nlmsg_route(struct nlmsghdr *nlh, size_t len)
 {
     return target_to_host_for_each_nlmsg(nlh, len, target_to_host_data_route);
 }
+#endif /* CONFIG_RTNETLINK */
 
 static abi_long host_to_target_data_audit(struct nlmsghdr *nlh)
 {
@@ -2794,6 +2798,7 @@ static TargetFdTrans target_packet_trans = {
     .target_to_host_addr = packet_target_to_host_sockaddr,
 };
 
+#ifdef CONFIG_RTNETLINK
 static abi_long netlink_route_target_to_host(void *buf, size_t len)
 {
     return target_to_host_nlmsg_route(buf, len);
@@ -2808,6 +2813,7 @@ static TargetFdTrans target_netlink_route_trans = {
     .target_to_host_data = netlink_route_target_to_host,
     .host_to_target_data = netlink_route_host_to_target,
 };
+#endif /* CONFIG_RTNETLINK */
 
 static abi_long netlink_audit_target_to_host(void *buf, size_t len)
 {
@@ -2835,10 +2841,12 @@ static abi_long do_socket(int domain, int type, int protocol)
         return ret;
     }
 
-    if (domain == PF_NETLINK &&
-        !(protocol == NETLINK_ROUTE ||
-          protocol == NETLINK_KOBJECT_UEVENT ||
-          protocol == NETLINK_AUDIT)) {
+    if (domain == PF_NETLINK && !(
+#ifdef CONFIG_RTNETLINK
+         protocol == NETLINK_ROUTE ||
+#endif
+         protocol == NETLINK_KOBJECT_UEVENT ||
+         protocol == NETLINK_AUDIT)) {
         return -EPFNOSUPPORT;
     }
 
@@ -2857,9 +2865,11 @@ static abi_long do_socket(int domain, int type, int protocol)
             fd_trans_register(ret, &target_packet_trans);
         } else if (domain == PF_NETLINK) {
             switch (protocol) {
+#ifdef CONFIG_RTNETLINK
             case NETLINK_ROUTE:
                 fd_trans_register(ret, &target_netlink_route_trans);
                 break;
+#endif
             case NETLINK_KOBJECT_UEVENT:
                 /* nothing to do: messages are strings */
                 break;
-- 
2.5.5

             reply	other threads:[~2016-06-02 20:14 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-02 20:14 Laurent Vivier [this message]
2016-06-03  8:32 ` [Qemu-devel] [PATCH] linux-user: check if NETLINK_ROUTE is available Riku Voipio
2016-06-03  8:42   ` Laurent Vivier
2016-06-07  8:48 ` Riku Voipio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464898455-10082-1-git-send-email-laurent@vivier.eu \
    --to=laurent@vivier.eu \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=riku.voipio@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).