From: David Gibson <david@gibson.dropbear.id.au>
To: peter.maydell@linaro.org
Cc: agraf@suse.de, qemu-ppc@nongnu.org, qemu-devel@nongnu.org,
Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>,
David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PULL 15/26] target-ppc: fixup bitrot in mmu_helper.c debug statements
Date: Tue, 7 Jun 2016 20:48:02 +1000 [thread overview]
Message-ID: <1465296493-10851-16-git-send-email-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <1465296493-10851-1-git-send-email-david@gibson.dropbear.id.au>
From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This fixes compilation of mmu_helper.c when all of the debug #defines at
the start of the file are enabled.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
target-ppc/mmu_helper.c | 38 ++++++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/target-ppc/mmu_helper.c b/target-ppc/mmu_helper.c
index 1499af72..f5c4e69 100644
--- a/target-ppc/mmu_helper.c
+++ b/target-ppc/mmu_helper.c
@@ -512,18 +512,20 @@ static inline int get_segment_6xx_tlb(CPUPPCState *env, mmu_ctx_t *ctx,
/* Software TLB search */
ret = ppc6xx_tlb_check(env, ctx, eaddr, rw, type);
#if defined(DUMP_PAGE_TABLES)
- if (qemu_log_mask(CPU_LOG_MMU)) {
+ if (qemu_loglevel_mask(CPU_LOG_MMU)) {
+ CPUState *cs = ENV_GET_CPU(env);
hwaddr curaddr;
uint32_t a0, a1, a2, a3;
qemu_log("Page table: " TARGET_FMT_plx " len " TARGET_FMT_plx
- "\n", sdr, mask + 0x80);
- for (curaddr = sdr; curaddr < (sdr + mask + 0x80);
+ "\n", env->htab_base, env->htab_mask + 0x80);
+ for (curaddr = env->htab_base;
+ curaddr < (env->htab_base + env->htab_mask + 0x80);
curaddr += 16) {
- a0 = ldl_phys(curaddr);
- a1 = ldl_phys(curaddr + 4);
- a2 = ldl_phys(curaddr + 8);
- a3 = ldl_phys(curaddr + 12);
+ a0 = ldl_phys(cs->as, curaddr);
+ a1 = ldl_phys(cs->as, curaddr + 4);
+ a2 = ldl_phys(cs->as, curaddr + 8);
+ a3 = ldl_phys(cs->as, curaddr + 12);
if (a0 != 0 || a1 != 0 || a2 != 0 || a3 != 0) {
qemu_log(TARGET_FMT_plx ": %08x %08x %08x %08x\n",
curaddr, a0, a1, a2, a3);
@@ -894,9 +896,9 @@ static int ppcmas_tlb_check(CPUPPCState *env, ppcmas_tlb_t *tlb,
mask = ~(booke206_tlb_to_page_size(env, tlb) - 1);
LOG_SWTLB("%s: TLB ADDR=0x" TARGET_FMT_lx " PID=0x%x MAS1=0x%x MAS2=0x%"
- PRIx64 " mask=0x" TARGET_FMT_lx " MAS7_3=0x%" PRIx64 " MAS8=%x\n",
- __func__, address, pid, tlb->mas1, tlb->mas2, mask, tlb->mas7_3,
- tlb->mas8);
+ PRIx64 " mask=0x%" HWADDR_PRIx " MAS7_3=0x%" PRIx64 " MAS8=0x%"
+ PRIx32 "\n", __func__, address, pid, tlb->mas1, tlb->mas2, mask,
+ tlb->mas7_3, tlb->mas8);
/* Check PID */
tlb_pid = (tlb->mas1 & MAS1_TID_MASK) >> MAS1_TID_SHIFT;
@@ -1746,6 +1748,9 @@ static inline void dump_store_bat(CPUPPCState *env, char ID, int ul, int nr,
void helper_store_ibatu(CPUPPCState *env, uint32_t nr, target_ulong value)
{
target_ulong mask;
+#if defined(FLUSH_ALL_TLBS)
+ PowerPCCPU *cpu = ppc_env_get_cpu(env);
+#endif
dump_store_bat(env, 'I', 0, nr, value);
if (env->IBAT[0][nr] != value) {
@@ -1764,7 +1769,7 @@ void helper_store_ibatu(CPUPPCState *env, uint32_t nr, target_ulong value)
#if !defined(FLUSH_ALL_TLBS)
do_invalidate_BAT(env, env->IBAT[0][nr], mask);
#else
- tlb_flush(env, 1);
+ tlb_flush(CPU(cpu), 1);
#endif
}
}
@@ -1778,6 +1783,9 @@ void helper_store_ibatl(CPUPPCState *env, uint32_t nr, target_ulong value)
void helper_store_dbatu(CPUPPCState *env, uint32_t nr, target_ulong value)
{
target_ulong mask;
+#if defined(FLUSH_ALL_TLBS)
+ PowerPCCPU *cpu = ppc_env_get_cpu(env);
+#endif
dump_store_bat(env, 'D', 0, nr, value);
if (env->DBAT[0][nr] != value) {
@@ -1796,7 +1804,7 @@ void helper_store_dbatu(CPUPPCState *env, uint32_t nr, target_ulong value)
#if !defined(FLUSH_ALL_TLBS)
do_invalidate_BAT(env, env->DBAT[0][nr], mask);
#else
- tlb_flush(env, 1);
+ tlb_flush(CPU(cpu), 1);
#endif
}
}
@@ -1811,6 +1819,7 @@ void helper_store_601_batu(CPUPPCState *env, uint32_t nr, target_ulong value)
{
target_ulong mask;
#if defined(FLUSH_ALL_TLBS)
+ PowerPCCPU *cpu = ppc_env_get_cpu(env);
int do_inval;
#endif
@@ -1843,7 +1852,7 @@ void helper_store_601_batu(CPUPPCState *env, uint32_t nr, target_ulong value)
}
#if defined(FLUSH_ALL_TLBS)
if (do_inval) {
- tlb_flush(env, 1);
+ tlb_flush(CPU(cpu), 1);
}
#endif
}
@@ -1854,6 +1863,7 @@ void helper_store_601_batl(CPUPPCState *env, uint32_t nr, target_ulong value)
#if !defined(FLUSH_ALL_TLBS)
target_ulong mask;
#else
+ PowerPCCPU *cpu = ppc_env_get_cpu(env);
int do_inval;
#endif
@@ -1882,7 +1892,7 @@ void helper_store_601_batl(CPUPPCState *env, uint32_t nr, target_ulong value)
env->DBAT[1][nr] = value;
#if defined(FLUSH_ALL_TLBS)
if (do_inval) {
- tlb_flush(env, 1);
+ tlb_flush(CPU(cpu), 1);
}
#endif
}
--
2.5.5
next prev parent reply other threads:[~2016-06-07 10:48 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-07 10:47 [Qemu-devel] [PULL 00/26] ppc-for-2.7 queue 20160607 David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 01/26] target-ppc/fpu_helper: Fix efscmp* instructions handling David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 02/26] kvm: API to obtain max supported mem slots David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 03/26] vmstate: Define VARRAY with VMS_ALLOC David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 04/26] spapr_iommu: Introduce "enabled" state for TCE table David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 05/26] spapr_iommu: Migrate full state David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 06/26] spapr_iommu: Add root memory region David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 07/26] spapr_pci: Reset DMA config on PHB reset David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 08/26] spapr_pci: Add and export DMA resetting helper David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 09/26] spapr: Increase hotpluggable memory slots to 256 David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 10/26] spapr: Introduce pseries-2.7 machine type David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 11/26] ppc: Better figure out if processor has HV mode David Gibson
2016-06-07 10:47 ` [Qemu-devel] [PULL 12/26] ppc: Fix hreg_store_msr() so that non-HV mode cannot alter MSR:HV David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 13/26] ppc: fix hrfid, tlbia and slbia privilege David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 14/26] spapr_pci: Drop cannot_instantiate_with_device_add_yet=false David Gibson
2016-06-07 10:48 ` David Gibson [this message]
2016-06-07 10:48 ` [Qemu-devel] [PULL 16/26] macio: use DMA memory interface for non-block ATAPI transfers David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 17/26] dbdma: use DMA memory interface for memory accesses David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 18/26] ppc: Properly tag the translation cache based on MMU mode David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 19/26] ppc: Fix tlb invalidations on 6xx/7xx/7xxx 32-bit processors David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 20/26] ppc: Batch TLB flushes on 32-bit 6xx/7xx/7xxx in hash mode David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 21/26] ppc: POWER7 had ACOP and PID registers David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 22/26] ppc: POWER7 has lq/stq instructions and stq need to check ISA David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 23/26] ppc: Fix mtmsr decoding David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 24/26] ppc: Fix slbia decode David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 25/26] ppc: Add missing slbfee. instruction on ppc64 BookS processors David Gibson
2016-06-07 10:48 ` [Qemu-devel] [PULL 26/26] ppc: Do not take exceptions on unknown SPRs in privileged mode David Gibson
2016-06-07 12:38 ` [Qemu-devel] [PULL 00/26] ppc-for-2.7 queue 20160607 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465296493-10851-16-git-send-email-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=agraf@suse.de \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).