From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 10/31] iscsi: Convert to bdrv_co_pwrite_zeroes()
Date: Wed, 8 Jun 2016 11:16:36 +0200 [thread overview]
Message-ID: <1465377417-5012-11-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1465377417-5012-1-git-send-email-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
Another step on our continuing quest to switch to byte-based
interfaces.
As this is the first byte-based iscsi interface, convert
is_request_lun_aligned() into two versions, one for sectors
and one for bytes. Also, change from outright -EINVAL failure
on an unaligned request, to instead failing with -ENOTSUP to
trigger a read-modify-write fallback, particularly since the
block layer should be honoring bs->request_alignment to avoid
-EINVAL on read/write requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/iscsi.c | 58 ++++++++++++++++++++++++++++++++++------------------------
1 file changed, 34 insertions(+), 24 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index 52ea9d7..7e78ade 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -401,18 +401,26 @@ static int64_t sector_qemu2lun(int64_t sector, IscsiLun *iscsilun)
return sector * BDRV_SECTOR_SIZE / iscsilun->block_size;
}
-static bool is_request_lun_aligned(int64_t sector_num, int nb_sectors,
- IscsiLun *iscsilun)
+static bool is_byte_request_lun_aligned(int64_t offset, int count,
+ IscsiLun *iscsilun)
{
- if ((sector_num * BDRV_SECTOR_SIZE) % iscsilun->block_size ||
- (nb_sectors * BDRV_SECTOR_SIZE) % iscsilun->block_size) {
- error_report("iSCSI misaligned request: "
- "iscsilun->block_size %u, sector_num %" PRIi64
- ", nb_sectors %d",
- iscsilun->block_size, sector_num, nb_sectors);
- return 0;
- }
- return 1;
+ if (offset % iscsilun->block_size || count % iscsilun->block_size) {
+ error_report("iSCSI misaligned request: "
+ "iscsilun->block_size %u, offset %" PRIi64
+ ", count %d",
+ iscsilun->block_size, offset, count);
+ return false;
+ }
+ return true;
+}
+
+static bool is_sector_request_lun_aligned(int64_t sector_num, int nb_sectors,
+ IscsiLun *iscsilun)
+{
+ assert(nb_sectors < BDRV_REQUEST_MAX_SECTORS);
+ return is_byte_request_lun_aligned(sector_num << BDRV_SECTOR_BITS,
+ nb_sectors << BDRV_SECTOR_BITS,
+ iscsilun);
}
static unsigned long *iscsi_allocationmap_init(IscsiLun *iscsilun)
@@ -461,7 +469,7 @@ iscsi_co_writev_flags(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
if (fua) {
assert(iscsilun->dpofua);
}
- if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
+ if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
@@ -541,7 +549,7 @@ static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
iscsi_co_init_iscsitask(iscsilun, &iTask);
- if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
+ if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
ret = -EINVAL;
goto out;
}
@@ -638,7 +646,7 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
uint64_t lba;
uint32_t num_sectors;
- if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
+ if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
@@ -926,7 +934,7 @@ coroutine_fn iscsi_co_discard(BlockDriverState *bs, int64_t sector_num,
struct IscsiTask iTask;
struct unmap_list list;
- if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
+ if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
return -EINVAL;
}
@@ -977,8 +985,8 @@ retry:
}
static int
-coroutine_fn iscsi_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
- int nb_sectors, BdrvRequestFlags flags)
+coroutine_fn iscsi_co_pwrite_zeroes(BlockDriverState *bs, int64_t offset,
+ int count, BdrvRequestFlags flags)
{
IscsiLun *iscsilun = bs->opaque;
struct IscsiTask iTask;
@@ -986,8 +994,8 @@ coroutine_fn iscsi_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
uint32_t nb_blocks;
bool use_16_for_ws = iscsilun->use_16_for_rw;
- if (!is_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
- return -EINVAL;
+ if (!is_byte_request_lun_aligned(offset, count, iscsilun)) {
+ return -ENOTSUP;
}
if (flags & BDRV_REQ_MAY_UNMAP) {
@@ -1008,8 +1016,8 @@ coroutine_fn iscsi_co_write_zeroes(BlockDriverState *bs, int64_t sector_num,
return -ENOTSUP;
}
- lba = sector_qemu2lun(sector_num, iscsilun);
- nb_blocks = sector_qemu2lun(nb_sectors, iscsilun);
+ lba = offset / iscsilun->block_size;
+ nb_blocks = count / iscsilun->block_size;
if (iscsilun->zeroblock == NULL) {
iscsilun->zeroblock = g_try_malloc0(iscsilun->block_size);
@@ -1065,9 +1073,11 @@ retry:
}
if (flags & BDRV_REQ_MAY_UNMAP) {
- iscsi_allocationmap_clear(iscsilun, sector_num, nb_sectors);
+ iscsi_allocationmap_clear(iscsilun, offset >> BDRV_SECTOR_BITS,
+ count >> BDRV_SECTOR_BITS);
} else {
- iscsi_allocationmap_set(iscsilun, sector_num, nb_sectors);
+ iscsi_allocationmap_set(iscsilun, offset >> BDRV_SECTOR_BITS,
+ count >> BDRV_SECTOR_BITS);
}
return 0;
@@ -1856,7 +1866,7 @@ static BlockDriver bdrv_iscsi = {
.bdrv_co_get_block_status = iscsi_co_get_block_status,
.bdrv_co_discard = iscsi_co_discard,
- .bdrv_co_write_zeroes = iscsi_co_write_zeroes,
+ .bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
.bdrv_co_writev_flags = iscsi_co_writev_flags,
.bdrv_co_flush_to_disk = iscsi_co_flush,
--
1.8.3.1
next prev parent reply other threads:[~2016-06-08 9:17 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 9:16 [Qemu-devel] [PULL 00/31] Block layer patches Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 01/31] block: split write_zeroes always Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 02/31] qcow2: simplify logic in qcow2_co_write_zeroes Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 03/31] qcow2: add tracepoints for qcow2_co_write_zeroes Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 04/31] qemu-iotests: Test one more spot for optimizing write_zeroes Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 05/31] qcow2: Catch more unaligned write_zero into zero cluster Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 06/31] iscsi: Use block size as minimum zero/discard alignment Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 07/31] block: Track write zero limits in bytes Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 08/31] block: Add .bdrv_co_pwrite_zeroes() Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 09/31] block: Switch bdrv_write_zeroes() to byte interface Kevin Wolf
2016-06-08 9:16 ` Kevin Wolf [this message]
2016-06-08 9:16 ` [Qemu-devel] [PULL 11/31] qcow2: Convert to bdrv_co_pwrite_zeroes() Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 12/31] blkreplay: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 13/31] gluster: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 14/31] qed: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 15/31] raw-posix: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 16/31] raw_bsd: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 17/31] vmdk: " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 18/31] block: Kill bdrv_co_write_zeroes() Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 19/31] migration/block: Convert load to BlockBackend Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 20/31] migration/block: Convert saving " Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 21/31] block: assert that bs->request_alignment is a power of 2 Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 22/31] raw-posix: Fetch max sectors for host block device Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 23/31] qcow2: avoid extra flushes in qcow2 Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 24/31] block: Fix bdrv_all_delete_snapshot() error handling Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 25/31] blockdev: clean up error handling in do_open_tray Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 26/31] block: Don't emulate natively supported pwritev flags Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 27/31] qemu-img bench Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 28/31] qemu-img bench: Sequential writes Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 29/31] qemu-img bench: Make start offset configurable Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 30/31] qemu-img bench: Implement -S (step size) Kevin Wolf
2016-06-08 9:16 ` [Qemu-devel] [PULL 31/31] qemu-img bench: Add --flush-interval Kevin Wolf
2016-06-08 17:27 ` [Qemu-devel] [PULL 00/31] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465377417-5012-11-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).