From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 01/39] qcow2: Work with bytes in qcow2_get_cluster_offset()
Date: Thu, 16 Jun 2016 16:07:50 +0200 [thread overview]
Message-ID: <1466086108-24868-2-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1466086108-24868-1-git-send-email-kwolf@redhat.com>
This patch changes the units that qcow2_get_cluster_offset() uses
internally, without touching the interface just yet. This will be done
in another patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
block/qcow2-cluster.c | 44 +++++++++++++++++++++++---------------------
1 file changed, 23 insertions(+), 21 deletions(-)
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index b04bfaf..a59fb34 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -482,29 +482,28 @@ int qcow2_get_cluster_offset(BlockDriverState *bs, uint64_t offset,
unsigned int l2_index;
uint64_t l1_index, l2_offset, *l2_table;
int l1_bits, c;
- unsigned int index_in_cluster, nb_clusters;
- uint64_t nb_available, nb_needed;
+ unsigned int offset_in_cluster, nb_clusters;
+ uint64_t bytes_available, bytes_needed;
int ret;
+ unsigned int bytes;
- index_in_cluster = (offset >> 9) & (s->cluster_sectors - 1);
- nb_needed = *num + index_in_cluster;
+ assert(*num <= BDRV_REQUEST_MAX_SECTORS);
+ bytes = *num * BDRV_SECTOR_SIZE;
- l1_bits = s->l2_bits + s->cluster_bits;
-
- /* compute how many bytes there are between the offset and
- * the end of the l1 entry
- */
+ offset_in_cluster = offset_into_cluster(s, offset);
+ bytes_needed = (uint64_t) bytes + offset_in_cluster;
- nb_available = (1ULL << l1_bits) - (offset & ((1ULL << l1_bits) - 1));
-
- /* compute the number of available sectors */
+ l1_bits = s->l2_bits + s->cluster_bits;
- nb_available = (nb_available >> 9) + index_in_cluster;
+ /* compute how many bytes there are between the start of the cluster
+ * containing offset and the end of the l1 entry */
+ bytes_available = (1ULL << l1_bits) - (offset & ((1ULL << l1_bits) - 1))
+ + offset_in_cluster;
- if (nb_needed > nb_available) {
- nb_needed = nb_available;
+ if (bytes_needed > bytes_available) {
+ bytes_needed = bytes_available;
}
- assert(nb_needed <= INT_MAX);
+ assert(bytes_needed <= INT_MAX);
*cluster_offset = 0;
@@ -542,7 +541,7 @@ int qcow2_get_cluster_offset(BlockDriverState *bs, uint64_t offset,
*cluster_offset = be64_to_cpu(l2_table[l2_index]);
/* nb_needed <= INT_MAX, thus nb_clusters <= INT_MAX, too */
- nb_clusters = size_to_clusters(s, nb_needed << 9);
+ nb_clusters = size_to_clusters(s, bytes_needed);
ret = qcow2_get_cluster_type(*cluster_offset);
switch (ret) {
@@ -589,13 +588,16 @@ int qcow2_get_cluster_offset(BlockDriverState *bs, uint64_t offset,
qcow2_cache_put(bs, s->l2_table_cache, (void**) &l2_table);
- nb_available = (c * s->cluster_sectors);
+ bytes_available = (c * s->cluster_size);
out:
- if (nb_available > nb_needed)
- nb_available = nb_needed;
+ if (bytes_available > bytes_needed) {
+ bytes_available = bytes_needed;
+ }
- *num = nb_available - index_in_cluster;
+ bytes = bytes_available - offset_in_cluster;
+ assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
+ *num = bytes >> BDRV_SECTOR_BITS;
return ret;
--
1.8.3.1
next prev parent reply other threads:[~2016-06-16 14:08 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-16 14:07 [Qemu-devel] [PULL 00/39] Block layer patches Kevin Wolf
2016-06-16 14:07 ` Kevin Wolf [this message]
2016-06-16 14:07 ` [Qemu-devel] [PULL 02/39] qcow2: Implement .bdrv_co_preadv() Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 03/39] qcow2: Make copy_sectors() byte based Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 04/39] qcow2: Use bytes instead of sectors for QCowL2Meta Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 05/39] qcow2: Implement .bdrv_co_pwritev() Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 06/39] blockdev: clarify error on attempt to open locked tray Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 07/39] hmp: acquire aio_context in hmp_qemu_io Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 08/39] m25p80: fix test on blk_pread() return value Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 09/39] qemu-img bench: Fix uninitialised writethrough mode Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 10/39] block: Avoid bogus flags during mirroring Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 11/39] block: Assert that flags are in range Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 12/39] block: drop support for using qcow[2] encryption with system emulators Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 13/39] block: Byte-based bdrv_co_do_copy_on_readv() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 14/39] block: Prepare bdrv_aligned_preadv() for byte-aligned requests Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 15/39] block: Prepare bdrv_aligned_pwritev() " Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 16/39] raw-posix: Switch to bdrv_co_* interfaces Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 17/39] raw-posix: Implement .bdrv_co_preadv/pwritev Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 18/39] block: Don't enforce 512 byte minimum alignment Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 19/39] linux-aio: Cancel BH if not needed Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 20/39] doc: Fix mailing list address in tests/qemu-iotests/README Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 21/39] block: Introduce bdrv_preadv() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 22/39] block: Make .bdrv_load_vmstate() vectored Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 23/39] block: Allow .bdrv_load/save_vmstate() to return 0/-errno Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 24/39] block: Make bdrv_load/save_vmstate coroutine_fns Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 25/39] qcow2: Let vmstate call qcow2_co_preadv/pwrite directly Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 26/39] block: Remove bs->zero_beyond_eof Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 27/39] block: Fix snapshot=on with aio=native Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 28/39] block: use the block job list in bdrv_drain_all() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 29/39] block: use the block job list in qmp_query_block_jobs() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 30/39] block: Prevent sleeping jobs from resuming if they have been paused Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 31/39] block: Create the commit block job before reopening any image Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 32/39] iotests: 095: Clean up QEMU before showing image info Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 33/39] rbd:change error_setg() to error_setg_errno() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 34/39] block: Allow replacement of a BDS by its overlay Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 35/39] block/mirror: Fix target backing BDS Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 36/39] block/null: Implement bdrv_refresh_filename() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 37/39] iotests: Add test for post-mirror backing chains Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 38/39] iotests: Add test for oVirt-like storage migration Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 39/39] hbitmap: add 'pos < size' asserts Kevin Wolf
2016-06-16 15:06 ` [Qemu-devel] [PULL 00/39] Block layer patches Peter Maydell
2016-06-16 17:04 ` Eric Blake
2016-06-16 17:08 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466086108-24868-2-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).