From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 04/39] qcow2: Use bytes instead of sectors for QCowL2Meta
Date: Thu, 16 Jun 2016 16:07:53 +0200 [thread overview]
Message-ID: <1466086108-24868-5-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1466086108-24868-1-git-send-email-kwolf@redhat.com>
In preparation for implementing .bdrv_co_pwritev in qcow2.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
block/qcow2-cluster.c | 32 ++++++++++++--------------------
block/qcow2.h | 13 +++----------
2 files changed, 15 insertions(+), 30 deletions(-)
diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index b7671fc..b24230b 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -739,13 +739,12 @@ static int perform_cow(BlockDriverState *bs, QCowL2Meta *m, Qcow2COWRegion *r)
BDRVQcow2State *s = bs->opaque;
int ret;
- if (r->nb_sectors == 0) {
+ if (r->nb_bytes == 0) {
return 0;
}
qemu_co_mutex_unlock(&s->lock);
- ret = do_perform_cow(bs, m->offset, m->alloc_offset,
- r->offset, r->nb_sectors * BDRV_SECTOR_SIZE);
+ ret = do_perform_cow(bs, m->offset, m->alloc_offset, r->offset, r->nb_bytes);
qemu_co_mutex_lock(&s->lock);
if (ret < 0) {
@@ -1196,25 +1195,20 @@ static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
/*
* Save info needed for meta data update.
*
- * requested_sectors: Number of sectors from the start of the first
+ * requested_bytes: Number of bytes from the start of the first
* newly allocated cluster to the end of the (possibly shortened
* before) write request.
*
- * avail_sectors: Number of sectors from the start of the first
+ * avail_bytes: Number of bytes from the start of the first
* newly allocated to the end of the last newly allocated cluster.
*
- * nb_sectors: The number of sectors from the start of the first
+ * nb_bytes: The number of bytes from the start of the first
* newly allocated cluster to the end of the area that the write
* request actually writes to (excluding COW at the end)
*/
- int requested_sectors =
- (*bytes + offset_into_cluster(s, guest_offset))
- >> BDRV_SECTOR_BITS;
- int avail_sectors = nb_clusters
- << (s->cluster_bits - BDRV_SECTOR_BITS);
- int alloc_n_start = offset_into_cluster(s, guest_offset)
- >> BDRV_SECTOR_BITS;
- int nb_sectors = MIN(requested_sectors, avail_sectors);
+ uint64_t requested_bytes = *bytes + offset_into_cluster(s, guest_offset);
+ int avail_bytes = MIN(INT_MAX, nb_clusters << s->cluster_bits);
+ int nb_bytes = MIN(requested_bytes, avail_bytes);
QCowL2Meta *old_m = *m;
*m = g_malloc0(sizeof(**m));
@@ -1225,23 +1219,21 @@ static int handle_alloc(BlockDriverState *bs, uint64_t guest_offset,
.alloc_offset = alloc_cluster_offset,
.offset = start_of_cluster(s, guest_offset),
.nb_clusters = nb_clusters,
- .nb_available = nb_sectors,
.cow_start = {
.offset = 0,
- .nb_sectors = alloc_n_start,
+ .nb_bytes = offset_into_cluster(s, guest_offset),
},
.cow_end = {
- .offset = nb_sectors * BDRV_SECTOR_SIZE,
- .nb_sectors = avail_sectors - nb_sectors,
+ .offset = nb_bytes,
+ .nb_bytes = avail_bytes - nb_bytes,
},
};
qemu_co_queue_init(&(*m)->dependent_requests);
QLIST_INSERT_HEAD(&s->cluster_allocs, *m, next_in_flight);
*host_offset = alloc_cluster_offset + offset_into_cluster(s, guest_offset);
- *bytes = MIN(*bytes, (nb_sectors * BDRV_SECTOR_SIZE)
- - offset_into_cluster(s, guest_offset));
+ *bytes = MIN(*bytes, nb_bytes - offset_into_cluster(s, guest_offset));
assert(*bytes != 0);
return 1;
diff --git a/block/qcow2.h b/block/qcow2.h
index e2c42d5..175b0c1 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -302,8 +302,8 @@ typedef struct Qcow2COWRegion {
*/
uint64_t offset;
- /** Number of sectors to copy */
- int nb_sectors;
+ /** Number of bytes to copy */
+ int nb_bytes;
} Qcow2COWRegion;
/**
@@ -318,12 +318,6 @@ typedef struct QCowL2Meta
/** Host offset of the first newly allocated cluster */
uint64_t alloc_offset;
- /**
- * Number of sectors from the start of the first allocated cluster to
- * the end of the (possibly shortened) request
- */
- int nb_available;
-
/** Number of newly allocated clusters */
int nb_clusters;
@@ -471,8 +465,7 @@ static inline uint64_t l2meta_cow_start(QCowL2Meta *m)
static inline uint64_t l2meta_cow_end(QCowL2Meta *m)
{
- return m->offset + m->cow_end.offset
- + (m->cow_end.nb_sectors << BDRV_SECTOR_BITS);
+ return m->offset + m->cow_end.offset + m->cow_end.nb_bytes;
}
static inline uint64_t refcount_diff(uint64_t r1, uint64_t r2)
--
1.8.3.1
next prev parent reply other threads:[~2016-06-16 14:08 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-16 14:07 [Qemu-devel] [PULL 00/39] Block layer patches Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 01/39] qcow2: Work with bytes in qcow2_get_cluster_offset() Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 02/39] qcow2: Implement .bdrv_co_preadv() Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 03/39] qcow2: Make copy_sectors() byte based Kevin Wolf
2016-06-16 14:07 ` Kevin Wolf [this message]
2016-06-16 14:07 ` [Qemu-devel] [PULL 05/39] qcow2: Implement .bdrv_co_pwritev() Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 06/39] blockdev: clarify error on attempt to open locked tray Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 07/39] hmp: acquire aio_context in hmp_qemu_io Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 08/39] m25p80: fix test on blk_pread() return value Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 09/39] qemu-img bench: Fix uninitialised writethrough mode Kevin Wolf
2016-06-16 14:07 ` [Qemu-devel] [PULL 10/39] block: Avoid bogus flags during mirroring Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 11/39] block: Assert that flags are in range Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 12/39] block: drop support for using qcow[2] encryption with system emulators Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 13/39] block: Byte-based bdrv_co_do_copy_on_readv() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 14/39] block: Prepare bdrv_aligned_preadv() for byte-aligned requests Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 15/39] block: Prepare bdrv_aligned_pwritev() " Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 16/39] raw-posix: Switch to bdrv_co_* interfaces Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 17/39] raw-posix: Implement .bdrv_co_preadv/pwritev Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 18/39] block: Don't enforce 512 byte minimum alignment Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 19/39] linux-aio: Cancel BH if not needed Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 20/39] doc: Fix mailing list address in tests/qemu-iotests/README Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 21/39] block: Introduce bdrv_preadv() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 22/39] block: Make .bdrv_load_vmstate() vectored Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 23/39] block: Allow .bdrv_load/save_vmstate() to return 0/-errno Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 24/39] block: Make bdrv_load/save_vmstate coroutine_fns Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 25/39] qcow2: Let vmstate call qcow2_co_preadv/pwrite directly Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 26/39] block: Remove bs->zero_beyond_eof Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 27/39] block: Fix snapshot=on with aio=native Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 28/39] block: use the block job list in bdrv_drain_all() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 29/39] block: use the block job list in qmp_query_block_jobs() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 30/39] block: Prevent sleeping jobs from resuming if they have been paused Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 31/39] block: Create the commit block job before reopening any image Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 32/39] iotests: 095: Clean up QEMU before showing image info Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 33/39] rbd:change error_setg() to error_setg_errno() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 34/39] block: Allow replacement of a BDS by its overlay Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 35/39] block/mirror: Fix target backing BDS Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 36/39] block/null: Implement bdrv_refresh_filename() Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 37/39] iotests: Add test for post-mirror backing chains Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 38/39] iotests: Add test for oVirt-like storage migration Kevin Wolf
2016-06-16 14:08 ` [Qemu-devel] [PULL 39/39] hbitmap: add 'pos < size' asserts Kevin Wolf
2016-06-16 15:06 ` [Qemu-devel] [PULL 00/39] Block layer patches Peter Maydell
2016-06-16 17:04 ` Eric Blake
2016-06-16 17:08 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466086108-24868-5-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).