From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Subject: [Qemu-devel] [PULL 14/30] linux-headers: update to Linux 4.6
Date: Thu, 16 Jun 2016 16:16:09 +0200 [thread overview]
Message-ID: <1466086585-16526-15-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1466086585-16526-1-git-send-email-pbonzini@redhat.com>
From: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Message-Id: <146424973656.5666.1543626214358208452.stgit@bahia.huguette.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
include/standard-headers/linux/pci_regs.h | 20 +++++++++++++++++++-
include/standard-headers/linux/virtio_config.h | 2 ++
| 2 ++
| 3 +++
| 2 ++
| 1 +
| 4 +++-
| 6 +++---
| 2 ++
| 1 +
10 files changed, 38 insertions(+), 5 deletions(-)
diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h
index 1becea8..4040951 100644
--- a/include/standard-headers/linux/pci_regs.h
+++ b/include/standard-headers/linux/pci_regs.h
@@ -670,7 +670,8 @@
#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */
#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */
#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */
-#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID
+#define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */
+#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_DPC
#define PCI_EXT_CAP_DSN_SIZEOF 12
#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
@@ -946,4 +947,21 @@
#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */
#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */
+/* Downstream Port Containment */
+#define PCI_EXP_DPC_CAP 4 /* DPC Capability */
+#define PCI_EXP_DPC_CAP_RP_EXT 0x20 /* Root Port Extensions for DPC */
+#define PCI_EXP_DPC_CAP_POISONED_TLP 0x40 /* Poisoned TLP Egress Blocking Supported */
+#define PCI_EXP_DPC_CAP_SW_TRIGGER 0x80 /* Software Triggering Supported */
+#define PCI_EXP_DPC_CAP_DL_ACTIVE 0x1000 /* ERR_COR signal on DL_Active supported */
+
+#define PCI_EXP_DPC_CTL 6 /* DPC control */
+#define PCI_EXP_DPC_CTL_EN_NONFATAL 0x02 /* Enable trigger on ERR_NONFATAL message */
+#define PCI_EXP_DPC_CTL_INT_EN 0x08 /* DPC Interrupt Enable */
+
+#define PCI_EXP_DPC_STATUS 8 /* DPC Status */
+#define PCI_EXP_DPC_STATUS_TRIGGER 0x01 /* Trigger Status */
+#define PCI_EXP_DPC_STATUS_INTERRUPT 0x08 /* Interrupt Status */
+
+#define PCI_EXP_DPC_SOURCE_ID 10 /* DPC Source Identifier */
+
#endif /* LINUX_PCI_REGS_H */
diff --git a/include/standard-headers/linux/virtio_config.h b/include/standard-headers/linux/virtio_config.h
index bcc445b..b30d0cb 100644
--- a/include/standard-headers/linux/virtio_config.h
+++ b/include/standard-headers/linux/virtio_config.h
@@ -40,6 +40,8 @@
#define VIRTIO_CONFIG_S_DRIVER_OK 4
/* Driver has finished configuring features */
#define VIRTIO_CONFIG_S_FEATURES_OK 8
+/* Device entered invalid state, driver must reset it */
+#define VIRTIO_CONFIG_S_NEEDS_RESET 0x40
/* We've given up on this device. */
#define VIRTIO_CONFIG_S_FAILED 0x80
--git a/linux-headers/asm-arm/unistd.h b/linux-headers/asm-arm/unistd.h
index 3f6f727..ceb5450 100644
--- a/linux-headers/asm-arm/unistd.h
+++ b/linux-headers/asm-arm/unistd.h
@@ -418,6 +418,8 @@
#define __NR_membarrier (__NR_SYSCALL_BASE+389)
#define __NR_mlock2 (__NR_SYSCALL_BASE+390)
#define __NR_copy_file_range (__NR_SYSCALL_BASE+391)
+#define __NR_preadv2 (__NR_SYSCALL_BASE+392)
+#define __NR_pwritev2 (__NR_SYSCALL_BASE+393)
/*
* The following SWIs are ARM private.
--git a/linux-headers/asm-arm64/unistd.h b/linux-headers/asm-arm64/unistd.h
index 1caadc2..043d17a 100644
--- a/linux-headers/asm-arm64/unistd.h
+++ b/linux-headers/asm-arm64/unistd.h
@@ -13,4 +13,7 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+
+#define __ARCH_WANT_RENAMEAT
+
#include <asm-generic/unistd.h>
--git a/linux-headers/asm-powerpc/unistd.h b/linux-headers/asm-powerpc/unistd.h
index cd92d98..1e66eba 100644
--- a/linux-headers/asm-powerpc/unistd.h
+++ b/linux-headers/asm-powerpc/unistd.h
@@ -390,5 +390,7 @@
#define __NR_membarrier 365
#define __NR_mlock2 378
#define __NR_copy_file_range 379
+#define __NR_preadv2 380
+#define __NR_pwritev2 381
#endif /* _ASM_POWERPC_UNISTD_H_ */
--git a/linux-headers/asm-s390/kvm.h b/linux-headers/asm-s390/kvm.h
index a59499b..09ae5dc 100644
--- a/linux-headers/asm-s390/kvm.h
+++ b/linux-headers/asm-s390/kvm.h
@@ -25,6 +25,7 @@
#define KVM_DEV_FLIC_APF_DISABLE_WAIT 5
#define KVM_DEV_FLIC_ADAPTER_REGISTER 6
#define KVM_DEV_FLIC_ADAPTER_MODIFY 7
+#define KVM_DEV_FLIC_CLEAR_IO_IRQ 8
/*
* We can have up to 4*64k pending subchannels + 8 adapter interrupts,
* as well as up to ASYNC_PF_PER_VCPU*KVM_MAX_VCPUS pfault done interrupts.
--git a/linux-headers/asm-s390/unistd.h b/linux-headers/asm-s390/unistd.h
index 885837e..8a404fd 100644
--- a/linux-headers/asm-s390/unistd.h
+++ b/linux-headers/asm-s390/unistd.h
@@ -311,7 +311,9 @@
#define __NR_shutdown 373
#define __NR_mlock2 374
#define __NR_copy_file_range 375
-#define NR_syscalls 376
+#define __NR_preadv2 376
+#define __NR_pwritev2 377
+#define NR_syscalls 378
/*
* There are some system calls that are not present on 64 bit, some
--git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h
index cd54147..739c0c5 100644
--- a/linux-headers/asm-x86/kvm.h
+++ b/linux-headers/asm-x86/kvm.h
@@ -216,9 +216,9 @@ struct kvm_cpuid_entry2 {
__u32 padding[3];
};
-#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0)
-#define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1)
-#define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2)
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX (1 << 0)
+#define KVM_CPUID_FLAG_STATEFUL_FUNC (1 << 1)
+#define KVM_CPUID_FLAG_STATE_READ_NEXT (1 << 2)
/* for KVM_SET_CPUID2 */
struct kvm_cpuid2 {
--git a/linux-headers/asm-x86/unistd_x32.h b/linux-headers/asm-x86/unistd_x32.h
index 8f77ee8..0230779 100644
--- a/linux-headers/asm-x86/unistd_x32.h
+++ b/linux-headers/asm-x86/unistd_x32.h
@@ -306,7 +306,9 @@
#define __NR_vmsplice (__X32_SYSCALL_BIT + 532)
#define __NR_move_pages (__X32_SYSCALL_BIT + 533)
#define __NR_preadv (__X32_SYSCALL_BIT + 534)
+#define __NR_preadv2 (__X32_SYSCALL_BIT + 534)
#define __NR_pwritev (__X32_SYSCALL_BIT + 535)
+#define __NR_pwritev2 (__X32_SYSCALL_BIT + 535)
#define __NR_rt_tgsigqueueinfo (__X32_SYSCALL_BIT + 536)
#define __NR_recvmmsg (__X32_SYSCALL_BIT + 537)
#define __NR_sendmmsg (__X32_SYSCALL_BIT + 538)
--git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h
index 3bae71a..e60e21b 100644
--- a/linux-headers/linux/kvm.h
+++ b/linux-headers/linux/kvm.h
@@ -865,6 +865,7 @@ struct kvm_ppc_smmu_info {
#define KVM_CAP_SPAPR_TCE_64 125
#define KVM_CAP_ARM_PMU_V3 126
#define KVM_CAP_VCPU_ATTRIBUTES 127
+#define KVM_CAP_MAX_VCPU_ID 128
#ifdef KVM_CAP_IRQ_ROUTING
--
2.5.5
next prev parent reply other threads:[~2016-06-16 14:16 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-16 14:15 [Qemu-devel] [PULL 00/30] KVM, build, NBD, SCSI patches for 2016-06-16 Paolo Bonzini
2016-06-16 14:15 ` [Qemu-devel] [PULL 01/30] configure: Remove unused CONFIG_ZERO_MALLOC setting Paolo Bonzini
2016-06-16 14:15 ` [Qemu-devel] [PULL 02/30] os-posix: include sys/mman.h Paolo Bonzini
2016-06-16 14:15 ` [Qemu-devel] [PULL 03/30] clean-includes: run it once more Paolo Bonzini
2016-06-16 14:15 ` [Qemu-devel] [PULL 04/30] configure: Enable -Werror for MinGW builds, too Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 05/30] Makefile: Fix tag file generation targets Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 06/30] Make avx2 configure test work with -O2 Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 07/30] avx2 configure: Use primitives in test Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 08/30] configure: Remove unused CONFIG_SIGEV_THREAD_ID switch Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 09/30] nbd: Don't use *_to_cpup() functions Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 10/30] nbd: Don't use cpu_to_*w() functions Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 11/30] nbd: simplify the nbd_request and nbd_reply structs Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 12/30] target-i386: kvm: cache KVM_GET_SUPPORTED_CPUID data Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 13/30] scsi-disk: Use (unsigned long) typecasts when using "%lu" format string Paolo Bonzini
2016-06-16 14:16 ` Paolo Bonzini [this message]
2016-06-16 16:09 ` [Qemu-devel] [PULL 14/30] linux-headers: update to Linux 4.6 Christian Borntraeger
2016-06-16 16:31 ` Greg Kurz
2016-06-16 14:16 ` [Qemu-devel] [PULL 15/30] KVM: use KVM_CAP_MAX_VCPU_ID Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 16/30] vl.c: Add '-L help' which lists data dirs Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 17/30] nbd: Use BDRV_REQ_FUA for better FUA where supported Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 18/30] nbd: More debug typo fixes, use correct formats Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 19/30] nbd: Quit server after any write error Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 20/30] nbd: Improve server handling of bogus commands Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 21/30] nbd: Reject unknown request flags Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 22/30] nbd: Group all Linux-specific ioctl code in one place Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 23/30] nbd: Clean up ioctl handling of qemu-nbd -c Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 24/30] nbd: Detect servers that send unexpected error values Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 25/30] nbd: Avoid magic number for NBD max name size Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 26/30] scsi: esp: check buffer length before reading scsi command Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 27/30] scsi: esp: respect FIFO invariant after message phase Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 28/30] scsi: esp: clean up handle_ti/esp_do_dma if s->do_cmd Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 29/30] scsi: esp: make cmdbuf big enough for maximum CDB size Paolo Bonzini
2016-06-16 14:16 ` [Qemu-devel] [PULL 30/30] vl: smp_parse: cleanups Paolo Bonzini
2016-06-21 15:40 ` Igor Mammedov
2016-06-21 16:22 ` Andrew Jones
2016-06-16 16:02 ` [Qemu-devel] [PULL 00/30] KVM, build, NBD, SCSI patches for 2016-06-16 Peter Maydell
2016-06-16 16:29 ` Paolo Bonzini
2016-06-16 16:55 ` Peter Maydell
2016-06-16 17:01 ` Paolo Bonzini
2016-06-16 17:08 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466086585-16526-15-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=gkurz@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).