qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
* [Qemu-devel] [PATCH] m25p80: qdev-ify drive property
@ 2016-06-17 10:36 Paolo Bonzini
  2016-06-17 11:48 ` Cédric Le Goater
  0 siblings, 1 reply; 2+ messages in thread
From: Paolo Bonzini @ 2016-06-17 10:36 UTC (permalink / raw)
  To: qemu-devel; +Cc: kwolf, clg, crosthwaite.peter, peter.maydell, armbru

This allows specifying the property via -drive if=none and creating
the flash device with -device.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
        Cedric, can you put it at the beginning of your ast2400
        series and adjust aspeed_smc_init_flashes along these
        lines?  It does not affect command line usage.

 hw/arm/xilinx_zynq.c                |  8 +++++++-
 hw/arm/xlnx-ep108.c                 |  9 ++++++++-
 hw/block/m25p80.c                   | 10 ++--------
 hw/microblaze/petalogix_ml605_mmu.c |  9 ++++++++-
 4 files changed, 25 insertions(+), 11 deletions(-)

diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index aefebcf..b0cabe2 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -138,7 +138,13 @@ static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq,
         spi = (SSIBus *)qdev_get_child_bus(dev, bus_name);
 
         for (j = 0; j < num_ss; ++j) {
-            flash_dev = ssi_create_slave(spi, "n25q128");
+            DriveInfo *dinfo = drive_get_next(IF_MTD);
+            flash_dev = ssi_create_slave_no_init(spi, "n25q128");
+            if (dinfo) {
+                qdev_prop_set_drive(flash_dev, "drive",
+                                    blk_by_legacy_dinfo(dinfo), &error_fatal);
+            }
+            qdev_init_nofail(flash_dev);
 
             cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
             sysbus_connect_irq(busdev, i * num_ss + j + 1, cs_line);
diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-ep108.c
index 34b4641..4ec590a 100644
--- a/hw/arm/xlnx-ep108.c
+++ b/hw/arm/xlnx-ep108.c
@@ -88,12 +88,19 @@ static void xlnx_ep108_init(MachineState *machine)
         SSIBus *spi_bus;
         DeviceState *flash_dev;
         qemu_irq cs_line;
+        DriveInfo *dinfo = drive_get_next(IF_MTD);
         gchar *bus_name = g_strdup_printf("spi%d", i);
 
         spi_bus = (SSIBus *)qdev_get_child_bus(DEVICE(&s->soc), bus_name);
         g_free(bus_name);
 
-        flash_dev = ssi_create_slave(spi_bus, "sst25wf080");
+        flash_dev = ssi_create_slave_no_init(spi_bus, "sst25wf080");
+        if (dinfo) {
+            qdev_prop_set_drive(flash_dev, "drive", blk_by_legacy_dinfo(dinfo),
+                                &error_fatal);
+        }
+        qdev_init_nofail(flash_dev);
+
         cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
 
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi[i]), 1, cs_line);
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index 51d8596..1a44b4c 100644
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -880,7 +880,6 @@ static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx)
 
 static int m25p80_init(SSISlave *ss)
 {
-    DriveInfo *dinfo;
     Flash *s = M25P80(ss);
     M25P80Class *mc = M25P80_GET_CLASS(s);
 
@@ -889,14 +888,8 @@ static int m25p80_init(SSISlave *ss)
     s->size = s->pi->sector_size * s->pi->n_sectors;
     s->dirty_page = -1;
 
-    /* FIXME use a qdev drive property instead of drive_get_next() */
-    dinfo = drive_get_next(IF_MTD);
-
-    if (dinfo) {
+    if (s->blk) {
         DB_PRINT_L(0, "Binding to IF_MTD drive\n");
-        s->blk = blk_by_legacy_dinfo(dinfo);
-        blk_attach_dev_nofail(s->blk, s);
-
         s->storage = blk_blockalign(s->blk, s->size);
 
         /* FIXME: Move to late init */
@@ -927,6 +920,7 @@ static void m25p80_pre_save(void *opaque)
 
 static Property m25p80_properties[] = {
     DEFINE_PROP_UINT32("nonvolatile-cfg", Flash, nonvolatile_cfg, 0x8FFF),
+    DEFINE_PROP_DRIVE("drive", Flash, blk),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/microblaze/petalogix_ml605_mmu.c b/hw/microblaze/petalogix_ml605_mmu.c
index 07527b6..4968bdb 100644
--- a/hw/microblaze/petalogix_ml605_mmu.c
+++ b/hw/microblaze/petalogix_ml605_mmu.c
@@ -191,9 +191,16 @@ petalogix_ml605_init(MachineState *machine)
         spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
 
         for (i = 0; i < NUM_SPI_FLASHES; i++) {
+            DriveInfo *dinfo = drive_get_next(IF_MTD);
             qemu_irq cs_line;
 
-            dev = ssi_create_slave(spi, "n25q128");
+            dev = ssi_create_slave_no_init(spi, "n25q128");
+            if (dinfo) {
+                qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo),
+                                    &error_fatal);
+            }
+            qdev_init_nofail(dev);
+
             cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
             sysbus_connect_irq(busdev, i+1, cs_line);
         }
-- 
2.5.5

^ permalink raw reply related	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-06-17 11:48 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-06-17 10:36 [Qemu-devel] [PATCH] m25p80: qdev-ify drive property Paolo Bonzini
2016-06-17 11:48 ` Cédric Le Goater

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).