From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: dgilbert@redhat.com, bcketchum@gmail.com
Subject: [Qemu-devel] [PATCH 1/6] serial: make tsr_retry unsigned
Date: Mon, 20 Jun 2016 16:29:00 +0200 [thread overview]
Message-ID: <1466432945-28682-2-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1466432945-28682-1-git-send-email-pbonzini@redhat.com>
It can never become negative; reflect this in the type of the field
and simplify the conditions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/char/serial.c | 12 ++++++++----
include/hw/char/serial.h | 2 +-
2 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/hw/char/serial.c b/hw/char/serial.c
index 6d815b5..e65e9e0 100644
--- a/hw/char/serial.c
+++ b/hw/char/serial.c
@@ -229,7 +229,7 @@ static gboolean serial_xmit(GIOChannel *chan, GIOCondition cond, void *opaque)
do {
assert(!(s->lsr & UART_LSR_TEMT));
- if (s->tsr_retry <= 0) {
+ if (s->tsr_retry == 0) {
assert(!(s->lsr & UART_LSR_THRE));
if (s->fcr & UART_FCR_FE) {
@@ -252,7 +252,7 @@ static gboolean serial_xmit(GIOChannel *chan, GIOCondition cond, void *opaque)
/* in loopback mode, say that we just received a char */
serial_receive1(s, &s->tsr, 1);
} else if (qemu_chr_fe_write(s->chr, &s->tsr, 1) != 1) {
- if (s->tsr_retry >= 0 && s->tsr_retry < MAX_XMIT_RETRY &&
+ if (s->tsr_retry < MAX_XMIT_RETRY &&
qemu_chr_fe_add_watch(s->chr, G_IO_OUT|G_IO_HUP,
serial_xmit, s) > 0) {
s->tsr_retry++;
@@ -330,7 +330,7 @@ static void serial_ioport_write(void *opaque, hwaddr addr, uint64_t val,
s->lsr &= ~UART_LSR_THRE;
s->lsr &= ~UART_LSR_TEMT;
serial_update_irq(s);
- if (s->tsr_retry <= 0) {
+ if (s->tsr_retry == 0) {
serial_xmit(NULL, G_IO_OUT, s);
}
}
@@ -639,6 +639,10 @@ static int serial_post_load(void *opaque, int version_id)
if (s->thr_ipending == -1) {
s->thr_ipending = ((s->iir & UART_IIR_ID) == UART_IIR_THRI);
}
+ if (s->tsr_retry > MAX_XMIT_RETRY) {
+ s->tsr_retry = MAX_XMIT_RETRY;
+ }
+
s->last_break_enable = (s->lcr >> 6) & 1;
/* Initialize fcr via setter to perform essential side-effects */
serial_write_fcr(s, s->fcr_vmstate);
@@ -685,7 +689,7 @@ static const VMStateDescription vmstate_serial_tsr = {
.minimum_version_id = 1,
.needed = serial_tsr_needed,
.fields = (VMStateField[]) {
- VMSTATE_INT32(tsr_retry, SerialState),
+ VMSTATE_UINT32(tsr_retry, SerialState),
VMSTATE_UINT8(thr, SerialState),
VMSTATE_UINT8(tsr, SerialState),
VMSTATE_END_OF_LIST()
diff --git a/include/hw/char/serial.h b/include/hw/char/serial.h
index 15beb6b..ef90615 100644
--- a/include/hw/char/serial.h
+++ b/include/hw/char/serial.h
@@ -55,7 +55,7 @@ struct SerialState {
int last_break_enable;
int it_shift;
int baudbase;
- int tsr_retry;
+ unsigned tsr_retry;
uint32_t wakeup;
/* Time when the last byte was successfully sent out of the tsr */
--
2.5.5
next prev parent reply other threads:[~2016-06-20 14:29 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-20 14:28 [Qemu-devel] [PATCH 0/6] serial: flow control fixes Paolo Bonzini
2016-06-20 14:29 ` Paolo Bonzini [this message]
2016-06-22 14:44 ` [Qemu-devel] [PATCH 1/6] serial: make tsr_retry unsigned Dr. David Alan Gilbert
2016-06-20 14:29 ` [Qemu-devel] [PATCH 2/6] serial: reinstate watch after migration Paolo Bonzini
2016-06-22 15:05 ` Dr. David Alan Gilbert
2016-06-22 15:11 ` Paolo Bonzini
2016-06-22 15:41 ` Dr. David Alan Gilbert
2016-06-20 14:29 ` [Qemu-devel] [PATCH 3/6] serial: separate serial_xmit and serial_watch_cb Paolo Bonzini
2016-06-22 15:09 ` Dr. David Alan Gilbert
2016-06-22 15:14 ` Paolo Bonzini
2016-06-20 14:29 ` [Qemu-devel] [PATCH 4/6] serial: simplify tsr_retry reset Paolo Bonzini
2016-06-22 15:12 ` Dr. David Alan Gilbert
2016-06-20 14:29 ` [Qemu-devel] [PATCH 5/6] char: change qemu_chr_fe_add_watch to return unsigned Paolo Bonzini
2016-06-22 15:22 ` Dr. David Alan Gilbert
2016-06-20 14:29 ` [Qemu-devel] [PATCH 6/6] serial: remove watch on reset Paolo Bonzini
2016-06-22 14:04 ` Bret Ketchum
2016-06-22 15:38 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466432945-28682-2-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=bcketchum@gmail.com \
--cc=dgilbert@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).