From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: real@ispras.ru
Subject: [Qemu-devel] [PATCH 2/3] ich9: clean up ich9_lpc_update_pic/ich9_lpc_update_apic and callers
Date: Mon, 20 Jun 2016 16:39:18 +0200 [thread overview]
Message-ID: <1466433559-30930-3-git-send-email-pbonzini@redhat.com> (raw)
In-Reply-To: <1466433559-30930-1-git-send-email-pbonzini@redhat.com>
Make ich9_lpc_update_pic take care only of GSIs 0-15, and
ich9_lpc_update_apic take care only of GSIs 16-23. Assert
that they are called with the correct GSI indices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/isa/lpc_ich9.c | 39 ++++++++++++++++-----------------------
1 file changed, 16 insertions(+), 23 deletions(-)
diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c
index b116e1b..446797b 100644
--- a/hw/isa/lpc_ich9.c
+++ b/hw/isa/lpc_ich9.c
@@ -204,38 +204,28 @@ static void ich9_lpc_pic_irq(ICH9LPCState *lpc, int pirq_num,
abort();
}
-/* pic_irq: i8254 irq 0-15 */
-static void ich9_lpc_update_pic(ICH9LPCState *lpc, int pic_irq)
+/* gsi: i8259 irq 0-15, otherwise ignored */
+static void ich9_lpc_update_pic(ICH9LPCState *lpc, int gsi)
{
int i, pic_level;
+ assert(gsi < ICH9_LPC_PIC_NUM_PINS);
+
/* The pic level is the logical OR of all the PCI irqs mapped to it */
pic_level = 0;
for (i = 0; i < ICH9_LPC_NB_PIRQS; i++) {
int tmp_irq;
int tmp_dis;
ich9_lpc_pic_irq(lpc, i, &tmp_irq, &tmp_dis);
- if (!tmp_dis && pic_irq == tmp_irq) {
+ if (!tmp_dis && tmp_irq == gsi) {
pic_level |= pci_bus_get_irq_level(lpc->d.bus, i);
}
}
- if (pic_irq == ich9_lpc_sci_irq(lpc)) {
+ if (gsi == ich9_lpc_sci_irq(lpc)) {
pic_level |= lpc->sci_level;
}
- qemu_set_irq(lpc->pic[pic_irq], pic_level);
-}
-
-/* pirq: pirq[A-H] 0-7*/
-static void ich9_lpc_update_by_pirq(ICH9LPCState *lpc, int pirq)
-{
- int pic_irq;
- int pic_dis;
-
- ich9_lpc_pic_irq(lpc, pirq, &pic_irq, &pic_dis);
- assert(pic_irq < ICH9_LPC_PIC_NUM_PINS);
-
- ich9_lpc_update_pic(lpc, pic_irq);
+ qemu_set_irq(lpc->pic[gsi], pic_level);
}
/* APIC mode: GSIx: PIRQ[A-H] -> GSI 16, ... no pirq shares same APIC pins. */
@@ -253,9 +243,9 @@ static void ich9_lpc_update_apic(ICH9LPCState *lpc, int gsi)
{
int level = 0;
- if (gsi >= ICH9_LPC_PIC_NUM_PINS) {
- level |= pci_bus_get_irq_level(lpc->d.bus, ich9_gsi_to_pirq(gsi));
- }
+ assert(gsi >= ICH9_LPC_PIC_NUM_PINS);
+
+ level |= pci_bus_get_irq_level(lpc->d.bus, ich9_gsi_to_pirq(gsi));
if (gsi == ich9_lpc_sci_irq(lpc)) {
level |= lpc->sci_level;
}
@@ -266,12 +256,14 @@ static void ich9_lpc_update_apic(ICH9LPCState *lpc, int gsi)
void ich9_lpc_set_irq(void *opaque, int pirq, int level)
{
ICH9LPCState *lpc = opaque;
+ int pic_irq, pic_dis;
assert(0 <= pirq);
assert(pirq < ICH9_LPC_NB_PIRQS);
ich9_lpc_update_apic(lpc, ich9_pirq_to_gsi(pirq));
- ich9_lpc_update_by_pirq(lpc, pirq);
+ ich9_lpc_pic_irq(lpc, pirq, &pic_irq, &pic_dis);
+ ich9_lpc_update_pic(lpc, pic_irq);
}
/* return the pirq number (PIRQ[A-H]:0-7) corresponding to
@@ -362,8 +354,9 @@ static void ich9_set_sci(void *opaque, int irq_num, int level)
return;
}
- ich9_lpc_update_apic(lpc, irq);
- if (irq < ICH9_LPC_PIC_NUM_PINS) {
+ if (irq >= ICH9_LPC_PIC_NUM_PINS) {
+ ich9_lpc_update_apic(lpc, irq);
+ } else {
ich9_lpc_update_pic(lpc, irq);
}
}
--
2.5.5
next prev parent reply other threads:[~2016-06-20 14:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-20 14:39 [Qemu-devel] [PATCH 0/3] ich9: clean up handling of output interrupt pins Paolo Bonzini
2016-06-20 14:39 ` [Qemu-devel] [PATCH 1/3] ich9: call ich9_lpc_update_pic for disabled pirqs Paolo Bonzini
2016-06-22 11:07 ` Ефимов Василий
2016-06-20 14:39 ` Paolo Bonzini [this message]
2016-06-22 11:03 ` [Qemu-devel] [PATCH 2/3] ich9: clean up ich9_lpc_update_pic/ich9_lpc_update_apic and callers Ефимов Василий
2016-06-20 14:39 ` [Qemu-devel] [PATCH 3/3] ich9: unify pic and ioapic IRQ vectors Paolo Bonzini
2016-06-22 11:03 ` Ефимов Василий
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466433559-30930-3-git-send-email-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=real@ispras.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).