From: David Gibson <david@gibson.dropbear.id.au>
To: peter.maydell@linaro.org
Cc: agraf@suse.de, qemu-ppc@nongnu.org, pbonzini@redhat.com,
qemu-devel@nongnu.org,
"Benjamin Herrenschmidt" <benh@kernel.crashing.org>,
"Cédric Le Goater" <clg@kaod.org>,
"David Gibson" <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PULL 11/17] ppc: Fix generation if ISI/DSI vs. HV mode
Date: Thu, 23 Jun 2016 15:48:40 +1000 [thread overview]
Message-ID: <1466660926-1544-12-git-send-email-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <1466660926-1544-1-git-send-email-david@gibson.dropbear.id.au>
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Under some circumstances, we need to direct ISI and DSI interrupts
at the hypervisor, turning them into HISI/HDSI, and using different
SPRs (HDSISR and HDAR) depending on the combination of MSR_DR and
the corresponding VPM bits in LPCR.
This moves part of the code into helpers that are fixed to select
the right exception type and registers. On pre-P7 processors, LPCR
is 0 which provides the old behaviour of directing the interrupts
at the supervisor.
Thanks to Andrei Warkentin for finding a bug when HV=1
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[clg: Merged a fix on POWERPC_EXCP_HDSI fixing the condition on
msr_hv, from Andrei Warkentin <andrey.warkentin@gmail.com> ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
target-ppc/mmu-hash64.c | 69 +++++++++++++++++++++++++++++++++++--------------
1 file changed, 50 insertions(+), 19 deletions(-)
diff --git a/target-ppc/mmu-hash64.c b/target-ppc/mmu-hash64.c
index 668da5e..5b7b5e9 100644
--- a/target-ppc/mmu-hash64.c
+++ b/target-ppc/mmu-hash64.c
@@ -613,6 +613,47 @@ unsigned ppc_hash64_hpte_page_shift_noslb(PowerPCCPU *cpu,
return 0;
}
+static void ppc_hash64_set_isi(CPUState *cs, CPUPPCState *env,
+ uint64_t error_code)
+{
+ bool vpm;
+
+ if (msr_ir) {
+ vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM1);
+ } else {
+ vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM0);
+ }
+ if (vpm && !msr_hv) {
+ cs->exception_index = POWERPC_EXCP_HISI;
+ } else {
+ cs->exception_index = POWERPC_EXCP_ISI;
+ }
+ env->error_code = error_code;
+}
+
+static void ppc_hash64_set_dsi(CPUState *cs, CPUPPCState *env, uint64_t dar,
+ uint64_t dsisr)
+{
+ bool vpm;
+
+ if (msr_dr) {
+ vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM1);
+ } else {
+ vpm = !!(env->spr[SPR_LPCR] & LPCR_VPM0);
+ }
+ if (vpm && !msr_hv) {
+ cs->exception_index = POWERPC_EXCP_HDSI;
+ env->spr[SPR_HDAR] = dar;
+ env->spr[SPR_HDSISR] = dsisr;
+ } else {
+ cs->exception_index = POWERPC_EXCP_DSI;
+ env->spr[SPR_DAR] = dar;
+ env->spr[SPR_DSISR] = dsisr;
+ }
+ env->error_code = 0;
+}
+
+
int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
int rwx, int mmu_idx)
{
@@ -623,7 +664,7 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
hwaddr pte_offset;
ppc_hash_pte64_t pte;
int pp_prot, amr_prot, prot;
- uint64_t new_pte1;
+ uint64_t new_pte1, dsisr;
const int need_prot[] = {PAGE_READ, PAGE_WRITE, PAGE_EXEC};
hwaddr raddr;
@@ -657,26 +698,21 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
/* 3. Check for segment level no-execute violation */
if ((rwx == 2) && (slb->vsid & SLB_VSID_N)) {
- cs->exception_index = POWERPC_EXCP_ISI;
- env->error_code = 0x10000000;
+ ppc_hash64_set_isi(cs, env, 0x10000000);
return 1;
}
/* 4. Locate the PTE in the hash table */
pte_offset = ppc_hash64_htab_lookup(cpu, slb, eaddr, &pte);
if (pte_offset == -1) {
+ dsisr = 0x40000000;
if (rwx == 2) {
- cs->exception_index = POWERPC_EXCP_ISI;
- env->error_code = 0x40000000;
+ ppc_hash64_set_isi(cs, env, dsisr);
} else {
- cs->exception_index = POWERPC_EXCP_DSI;
- env->error_code = 0;
- env->spr[SPR_DAR] = eaddr;
if (rwx == 1) {
- env->spr[SPR_DSISR] = 0x42000000;
- } else {
- env->spr[SPR_DSISR] = 0x40000000;
+ dsisr |= 0x02000000;
}
+ ppc_hash64_set_dsi(cs, env, eaddr, dsisr);
}
return 1;
}
@@ -705,14 +741,9 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
/* Access right violation */
qemu_log_mask(CPU_LOG_MMU, "PTE access rejected\n");
if (rwx == 2) {
- cs->exception_index = POWERPC_EXCP_ISI;
- env->error_code = 0x08000000;
+ ppc_hash64_set_isi(cs, env, 0x08000000);
} else {
- target_ulong dsisr = 0;
-
- cs->exception_index = POWERPC_EXCP_DSI;
- env->error_code = 0;
- env->spr[SPR_DAR] = eaddr;
+ dsisr = 0;
if (need_prot[rwx] & ~pp_prot) {
dsisr |= 0x08000000;
}
@@ -722,7 +753,7 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
if (need_prot[rwx] & ~amr_prot) {
dsisr |= 0x00200000;
}
- env->spr[SPR_DSISR] = dsisr;
+ ppc_hash64_set_dsi(cs, env, eaddr, dsisr);
}
return 1;
}
--
2.5.5
next prev parent reply other threads:[~2016-06-23 5:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-23 5:48 [Qemu-devel] [PULL 00/17] ppc-for-2.7 queue 20160623 David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 01/17] powerpc/mm: Update the WIMG check during H_ENTER David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 02/17] tests: Use '+=' to add additional tests, not '=' David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 03/17] ppc64: disable gen_pause() for linux-user mode David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 04/17] target-ppc: Fix rlwimi, rlwinm, rlwnm again David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 05/17] ppc: Improve emulation of THRM registers David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 06/17] memory: Add reporting of supported page sizes David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 07/17] ppc: Fix rfi/rfid/hrfi/... emulation David Gibson
2016-06-27 4:42 ` Benjamin Herrenschmidt
2016-06-27 6:43 ` Mark Cave-Ayland
2016-06-27 6:48 ` David Gibson
2016-06-27 6:52 ` Benjamin Herrenschmidt
2016-06-23 5:48 ` [Qemu-devel] [PULL 08/17] ppc: define a default LPCR value David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 09/17] ppc: fix exception model for HV mode David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 10/17] ppc: Fix POWER7 and POWER8 exception definitions David Gibson
2016-06-23 5:48 ` David Gibson [this message]
2016-06-23 5:48 ` [Qemu-devel] [PULL 12/17] ppc: Rework generation of priv and inval interrupts David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 13/17] ppc: Add real mode CI load/store instructions for P7 and P8 David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 14/17] ppc: Turn a bunch of booleans from int to bool David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 15/17] ppc: Move exception generation code out of line David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 16/17] ppc: Add P7/P8 Power Management instructions David Gibson
2016-06-23 5:48 ` [Qemu-devel] [PULL 17/17] ppc: Disable huge page support if it is not available for main RAM David Gibson
2016-06-23 11:43 ` [Qemu-devel] [PULL 00/17] ppc-for-2.7 queue 20160623 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466660926-1544-12-git-send-email-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=agraf@suse.de \
--cc=benh@kernel.crashing.org \
--cc=clg@kaod.org \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).