From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, rth@twiddle.net, ehabkost@redhat.com,
mst@redhat.com, armbru@redhat.com,
eduardo.otubo@profitbricks.com, zhugh.fnst@cn.fujitsu.com,
eblake@redhat.com
Subject: [Qemu-devel] [PATCH 04/11] pc: cpu: consolidate apic-id validity checks in pc_cpu_pre_plug()
Date: Thu, 23 Jun 2016 16:54:22 +0200 [thread overview]
Message-ID: <1466693669-139967-5-git-send-email-imammedo@redhat.com> (raw)
In-Reply-To: <1466693669-139967-1-git-send-email-imammedo@redhat.com>
Machine code knows about all possible APIC IDs so use that
instead of hack which does O(n^2) complexity duplicate
checks, interating over global CPUs list.
As result duplicate check is done only once with O(log n) complexity.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
hw/i386/pc.c | 44 ++++++++++++++++++++++++++++++++------------
target-i386/cpu.c | 13 -------------
2 files changed, 32 insertions(+), 25 deletions(-)
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index ec9b14b..6ba6343 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1071,18 +1071,6 @@ void pc_hot_add_cpu(const int64_t id, Error **errp)
return;
}
- if (cpu_exists(apic_id)) {
- error_setg(errp, "Unable to add CPU: %" PRIi64
- ", it already exists", id);
- return;
- }
-
- if (id >= max_cpus) {
- error_setg(errp, "Unable to add CPU: %" PRIi64
- ", max allowed: %d", id, max_cpus - 1);
- return;
- }
-
if (apic_id >= ACPI_CPU_HOTPLUG_ID_LIMIT) {
error_setg(errp, "Unable to add CPU: %" PRIi64
", resulting APIC ID (%" PRIi64 ") is too large",
@@ -1766,6 +1754,37 @@ static void pc_cpu_unplug_cb(HotplugHandler *hotplug_dev,
error_propagate(errp, local_err);
}
+static void pc_cpu_pre_plug(HotplugHandler *hotplug_dev,
+ DeviceState *dev, Error **errp)
+{
+ int idx;
+ X86CPU *cpu = X86_CPU(dev);
+ PCMachineState *pcms = PC_MACHINE(hotplug_dev);
+ CPUArchId *cpu_slot = pc_find_cpu(pcms, CPU(dev), &idx);
+
+ if (!cpu_slot) {
+ error_setg(errp, "Invalid CPU index with APIC ID (%" PRIu32
+ "), valid range 0:%d", cpu->apic_id,
+ pcms->possible_cpus->len - 1);
+ return;
+ }
+
+ if (cpu_slot->cpu) {
+ error_setg(errp, "CPU[%ld] with APIC ID %" PRIu32 " exists",
+ cpu_slot - pcms->possible_cpus->cpus,
+ cpu->apic_id);
+ return;
+ }
+}
+
+static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev,
+ DeviceState *dev, Error **errp)
+{
+ if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) {
+ pc_cpu_pre_plug(hotplug_dev, dev, errp);
+ }
+}
+
static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
@@ -2063,6 +2082,7 @@ static void pc_machine_class_init(ObjectClass *oc, void *data)
mc->hot_add_cpu = pc_hot_add_cpu;
mc->max_cpus = 255;
mc->reset = pc_machine_reset;
+ hc->pre_plug = pc_machine_device_pre_plug_cb;
hc->plug = pc_machine_device_plug_cb;
hc->unplug_request = pc_machine_device_unplug_request_cb;
hc->unplug = pc_machine_device_unplug_cb;
diff --git a/target-i386/cpu.c b/target-i386/cpu.c
index e7319e3..9511474 100644
--- a/target-i386/cpu.c
+++ b/target-i386/cpu.c
@@ -1838,8 +1838,6 @@ static void x86_cpuid_set_apic_id(Object *obj, Visitor *v, const char *name,
{
X86CPU *cpu = X86_CPU(obj);
DeviceState *dev = DEVICE(obj);
- const int64_t min = 0;
- const int64_t max = UINT32_MAX;
Error *error = NULL;
int64_t value;
@@ -1854,17 +1852,6 @@ static void x86_cpuid_set_apic_id(Object *obj, Visitor *v, const char *name,
error_propagate(errp, error);
return;
}
- if (value < min || value > max) {
- error_setg(errp, "Property %s.%s doesn't take value %" PRId64
- " (minimum: %" PRId64 ", maximum: %" PRId64 ")" ,
- object_get_typename(obj), name, value, min, max);
- return;
- }
-
- if ((value != cpu->apic_id) && cpu_exists(value)) {
- error_setg(errp, "CPU with APIC ID %" PRIi64 " exists", value);
- return;
- }
cpu->apic_id = value;
}
--
1.8.3.1
next prev parent reply other threads:[~2016-06-23 14:54 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-23 14:54 [Qemu-devel] [PATCH 00/11] pc: allow to use -device/device_add for CPUs Igor Mammedov
2016-06-23 14:54 ` [Qemu-devel] [PATCH 01/11] target-i386: cpu: use uint32_t for X86CPU.apic_id Igor Mammedov
2016-06-23 14:54 ` [Qemu-devel] [PATCH 02/11] pc: add x86_topo_ids_from_apicid() Igor Mammedov
2016-06-23 14:54 ` [Qemu-devel] [PATCH 03/11] pc: extract CPU lookup into a separate function Igor Mammedov
2016-06-23 17:32 ` Eduardo Habkost
2016-06-23 17:41 ` Igor Mammedov
2016-06-23 14:54 ` Igor Mammedov [this message]
2016-06-23 14:54 ` [Qemu-devel] [PATCH 05/11] target-i386: cpu: replace custom apic-id setter/getter with static property Igor Mammedov
2016-06-27 17:55 ` Eduardo Habkost
2016-06-28 6:43 ` Igor Mammedov
2016-06-28 13:35 ` Eduardo Habkost
2016-06-23 14:54 ` [Qemu-devel] [PATCH 06/11] target-i386: add socket/core/thread properties to X86CPU Igor Mammedov
2016-06-23 17:44 ` Eduardo Habkost
2016-06-23 19:18 ` Igor Mammedov
2016-06-23 20:18 ` Eduardo Habkost
2016-06-23 20:46 ` Igor Mammedov
2016-06-23 21:43 ` Eduardo Habkost
2016-06-24 5:23 ` Igor Mammedov
2016-06-23 14:54 ` [Qemu-devel] [PATCH 07/11] pc: set APIC ID based on socket/core/thread ids if it's not been set yet Igor Mammedov
2016-06-23 17:19 ` Eduardo Habkost
2016-06-23 17:48 ` Igor Mammedov
2016-06-23 19:27 ` Eduardo Habkost
2016-06-23 20:50 ` Igor Mammedov
2016-06-23 14:54 ` [Qemu-devel] [PATCH 08/11] pc: implement query-hotpluggable-cpus callback Igor Mammedov
2016-06-23 14:54 ` [Qemu-devel] [PATCH 09/11] pc: register created initial and hotpluged CPUs in one place pc_cpu_plug() Igor Mammedov
2016-06-23 14:54 ` [Qemu-devel] [PATCH 10/11] pc: delay setting number of boot CPUs to machine_done time Igor Mammedov
2016-06-23 14:54 ` [Qemu-devel] [PATCH 11/11] pc: cpu: allow device_add to be used with x86 cpu Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466693669-139967-5-git-send-email-imammedo@redhat.com \
--to=imammedo@redhat.com \
--cc=armbru@redhat.com \
--cc=eblake@redhat.com \
--cc=eduardo.otubo@profitbricks.com \
--cc=ehabkost@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=zhugh.fnst@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).