From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com, famz@redhat.com,
stefanha@redhat.com, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v3 13/22] block: Set request_alignment during .bdrv_refresh_limits()
Date: Thu, 23 Jun 2016 16:37:17 -0600 [thread overview]
Message-ID: <1466721446-27737-14-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1466721446-27737-1-git-send-email-eblake@redhat.com>
We want to eventually stick request_alignment alongside other
BlockLimits, but first, we must ensure it is populated at the
same time as all other limits, rather than being a special case
that is set only when a block is first opened.
Add a .bdrv_refresh_limits() to all four of our legacy devices
that will always be sector-only (bochs, cloop, dmg, vvfat), in
spite of their recent conversion to expose a byte interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
v3: no change
v2: new patch
---
block/bochs.c | 7 ++++++-
block/cloop.c | 7 ++++++-
block/dmg.c | 7 ++++++-
block/vvfat.c | 7 ++++++-
4 files changed, 24 insertions(+), 4 deletions(-)
diff --git a/block/bochs.c b/block/bochs.c
index 6c8d0f3..182c50b 100644
--- a/block/bochs.c
+++ b/block/bochs.c
@@ -105,7 +105,6 @@ static int bochs_open(BlockDriverState *bs, QDict *options, int flags,
int ret;
bs->read_only = 1; // no write support yet
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
ret = bdrv_pread(bs->file->bs, 0, &bochs, sizeof(bochs));
if (ret < 0) {
@@ -189,6 +188,11 @@ fail:
return ret;
}
+static void bochs_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+ bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+}
+
static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
{
BDRVBochsState *s = bs->opaque;
@@ -283,6 +287,7 @@ static BlockDriver bdrv_bochs = {
.instance_size = sizeof(BDRVBochsState),
.bdrv_probe = bochs_probe,
.bdrv_open = bochs_open,
+ .bdrv_refresh_limits = bochs_refresh_limits,
.bdrv_co_preadv = bochs_co_preadv,
.bdrv_close = bochs_close,
};
diff --git a/block/cloop.c b/block/cloop.c
index ea5a92b..d574003 100644
--- a/block/cloop.c
+++ b/block/cloop.c
@@ -67,7 +67,6 @@ static int cloop_open(BlockDriverState *bs, QDict *options, int flags,
int ret;
bs->read_only = 1;
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
/* read header */
ret = bdrv_pread(bs->file->bs, 128, &s->block_size, 4);
@@ -199,6 +198,11 @@ fail:
return ret;
}
+static void cloop_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+ bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+}
+
static inline int cloop_read_block(BlockDriverState *bs, int block_num)
{
BDRVCloopState *s = bs->opaque;
@@ -280,6 +284,7 @@ static BlockDriver bdrv_cloop = {
.instance_size = sizeof(BDRVCloopState),
.bdrv_probe = cloop_probe,
.bdrv_open = cloop_open,
+ .bdrv_refresh_limits = cloop_refresh_limits,
.bdrv_co_preadv = cloop_co_preadv,
.bdrv_close = cloop_close,
};
diff --git a/block/dmg.c b/block/dmg.c
index 06eb513..1e53cd8 100644
--- a/block/dmg.c
+++ b/block/dmg.c
@@ -439,7 +439,6 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
int ret;
bs->read_only = 1;
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
s->n_chunks = 0;
s->offsets = s->lengths = s->sectors = s->sectorcounts = NULL;
@@ -547,6 +546,11 @@ fail:
return ret;
}
+static void dmg_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+ bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+}
+
static inline int is_sector_in_chunk(BDRVDMGState* s,
uint32_t chunk_num, uint64_t sector_num)
{
@@ -720,6 +724,7 @@ static BlockDriver bdrv_dmg = {
.instance_size = sizeof(BDRVDMGState),
.bdrv_probe = dmg_probe,
.bdrv_open = dmg_open,
+ .bdrv_refresh_limits = dmg_refresh_limits,
.bdrv_co_preadv = dmg_co_preadv,
.bdrv_close = dmg_close,
};
diff --git a/block/vvfat.c b/block/vvfat.c
index 5569450..4d44636 100644
--- a/block/vvfat.c
+++ b/block/vvfat.c
@@ -1177,7 +1177,6 @@ static int vvfat_open(BlockDriverState *bs, QDict *options, int flags,
bs->read_only = 0;
}
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
bs->total_sectors = cyls * heads * secs;
if (init_directories(s, dirname, heads, secs, errp)) {
@@ -1209,6 +1208,11 @@ fail:
return ret;
}
+static void vvfat_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+ bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+}
+
static inline void vvfat_close_current_file(BDRVVVFATState *s)
{
if(s->current_mapping) {
@@ -3046,6 +3050,7 @@ static BlockDriver bdrv_vvfat = {
.bdrv_parse_filename = vvfat_parse_filename,
.bdrv_file_open = vvfat_open,
+ .bdrv_refresh_limits = vvfat_refresh_limits,
.bdrv_close = vvfat_close,
.bdrv_co_preadv = vvfat_co_preadv,
--
2.5.5
next prev parent reply other threads:[~2016-06-23 22:37 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-23 22:37 [Qemu-devel] [PATCH v3 00/22] Byte-based block limits Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 01/22] block: Tighter assertions on bdrv_aligned_pwritev() Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 02/22] block: Document supported flags during bdrv_aligned_preadv() Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 03/22] block: Fix harmless off-by-one in bdrv_aligned_preadv() Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 04/22] nbd: Allow larger requests Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 05/22] nbd: Advertise realistic limits to block layer Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 06/22] iscsi: " Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 07/22] scsi: Advertise limits by blocksize, not 512 Eric Blake
2016-06-24 5:22 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 08/22] block: Give nonzero result to blk_get_max_transfer_length() Eric Blake
2016-06-24 5:24 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 09/22] blkdebug: Set request_alignment during .bdrv_refresh_limits() Eric Blake
2016-06-24 5:42 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 10/22] iscsi: " Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 11/22] qcow2: " Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 12/22] raw-win32: " Eric Blake
2016-06-23 22:37 ` Eric Blake [this message]
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 14/22] block: Set default request_alignment during bdrv_refresh_limits() Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 15/22] block: Switch transfer length bounds to byte-based Eric Blake
2016-06-24 6:06 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 16/22] block: Wording tweaks to write zeroes limits Eric Blake
2016-06-24 6:12 ` Fam Zheng
2016-06-24 14:10 ` Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 17/22] block: Switch discard length bounds to byte-based Eric Blake
2016-06-24 6:43 ` Fam Zheng
2016-06-24 14:15 ` Eric Blake
2016-06-24 14:29 ` Kevin Wolf
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 18/22] block: Drop raw_refresh_limits() Eric Blake
2016-06-24 6:44 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 19/22] block: Split bdrv_merge_limits() from bdrv_refresh_limits() Eric Blake
2016-06-24 6:48 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 20/22] block: Move request_alignment into BlockLimit Eric Blake
2016-06-24 7:07 ` Fam Zheng
2016-06-24 13:45 ` Kevin Wolf
2016-06-24 14:17 ` Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 21/22] block: Fix error message style Eric Blake
2016-06-24 7:09 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 22/22] block: Use bool as appropriate for BDS members Eric Blake
2016-06-24 7:12 ` Fam Zheng
2016-06-24 14:32 ` [Qemu-devel] [PATCH v3 00/22] Byte-based block limits Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466721446-27737-14-git-send-email-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).