From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com, famz@redhat.com,
stefanha@redhat.com, Max Reitz <mreitz@redhat.com>
Subject: [Qemu-devel] [PATCH v3 01/22] block: Tighter assertions on bdrv_aligned_pwritev()
Date: Thu, 23 Jun 2016 16:37:05 -0600 [thread overview]
Message-ID: <1466721446-27737-2-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1466721446-27737-1-git-send-email-eblake@redhat.com>
For symmetry with bdrv_aligned_preadv(), assert that the caller
really has aligned things properly. This requires adding an align
parameter, which is used now only in the new asserts, but will
come in handy in a later patch that adds auto-fragmentation to the
max transfer size, since that value need not always be a multiple
of the alignment, and therefore must be rounded down.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
v3: no change
v2: new patch
---
block/io.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/block/io.c b/block/io.c
index 7cf3645..b95e856 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1254,7 +1254,7 @@ fail:
*/
static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
- QEMUIOVector *qiov, int flags)
+ int64_t align, QEMUIOVector *qiov, int flags)
{
BlockDriver *drv = bs->drv;
bool waited;
@@ -1263,6 +1263,9 @@ static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
int64_t start_sector = offset >> BDRV_SECTOR_BITS;
int64_t end_sector = DIV_ROUND_UP(offset + bytes, BDRV_SECTOR_SIZE);
+ assert(is_power_of_2(align));
+ assert((offset & (align - 1)) == 0);
+ assert((bytes & (align - 1)) == 0);
assert(!qiov || bytes == qiov->size);
assert((bs->open_flags & BDRV_O_NO_IO) == 0);
assert(!(flags & ~BDRV_REQ_MASK));
@@ -1349,7 +1352,7 @@ static int coroutine_fn bdrv_co_do_zero_pwritev(BlockDriverState *bs,
memset(buf + head_padding_bytes, 0, zero_bytes);
ret = bdrv_aligned_pwritev(bs, req, offset & ~(align - 1), align,
- &local_qiov,
+ align, &local_qiov,
flags & ~BDRV_REQ_ZERO_WRITE);
if (ret < 0) {
goto fail;
@@ -1362,7 +1365,7 @@ static int coroutine_fn bdrv_co_do_zero_pwritev(BlockDriverState *bs,
if (bytes >= align) {
/* Write the aligned part in the middle. */
uint64_t aligned_bytes = bytes & ~(align - 1);
- ret = bdrv_aligned_pwritev(bs, req, offset, aligned_bytes,
+ ret = bdrv_aligned_pwritev(bs, req, offset, aligned_bytes, align,
NULL, flags);
if (ret < 0) {
goto fail;
@@ -1386,7 +1389,7 @@ static int coroutine_fn bdrv_co_do_zero_pwritev(BlockDriverState *bs,
bdrv_debug_event(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
memset(buf, 0, bytes);
- ret = bdrv_aligned_pwritev(bs, req, offset, align,
+ ret = bdrv_aligned_pwritev(bs, req, offset, align, align,
&local_qiov, flags & ~BDRV_REQ_ZERO_WRITE);
}
fail:
@@ -1511,7 +1514,7 @@ int coroutine_fn bdrv_co_pwritev(BlockDriverState *bs,
bytes = ROUND_UP(bytes, align);
}
- ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
+ ret = bdrv_aligned_pwritev(bs, &req, offset, bytes, align,
use_local_qiov ? &local_qiov : qiov,
flags);
--
2.5.5
next prev parent reply other threads:[~2016-06-23 22:37 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-23 22:37 [Qemu-devel] [PATCH v3 00/22] Byte-based block limits Eric Blake
2016-06-23 22:37 ` Eric Blake [this message]
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 02/22] block: Document supported flags during bdrv_aligned_preadv() Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 03/22] block: Fix harmless off-by-one in bdrv_aligned_preadv() Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 04/22] nbd: Allow larger requests Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 05/22] nbd: Advertise realistic limits to block layer Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 06/22] iscsi: " Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 07/22] scsi: Advertise limits by blocksize, not 512 Eric Blake
2016-06-24 5:22 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 08/22] block: Give nonzero result to blk_get_max_transfer_length() Eric Blake
2016-06-24 5:24 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 09/22] blkdebug: Set request_alignment during .bdrv_refresh_limits() Eric Blake
2016-06-24 5:42 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 10/22] iscsi: " Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 11/22] qcow2: " Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 12/22] raw-win32: " Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 13/22] block: " Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 14/22] block: Set default request_alignment during bdrv_refresh_limits() Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 15/22] block: Switch transfer length bounds to byte-based Eric Blake
2016-06-24 6:06 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 16/22] block: Wording tweaks to write zeroes limits Eric Blake
2016-06-24 6:12 ` Fam Zheng
2016-06-24 14:10 ` Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 17/22] block: Switch discard length bounds to byte-based Eric Blake
2016-06-24 6:43 ` Fam Zheng
2016-06-24 14:15 ` Eric Blake
2016-06-24 14:29 ` Kevin Wolf
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 18/22] block: Drop raw_refresh_limits() Eric Blake
2016-06-24 6:44 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 19/22] block: Split bdrv_merge_limits() from bdrv_refresh_limits() Eric Blake
2016-06-24 6:48 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 20/22] block: Move request_alignment into BlockLimit Eric Blake
2016-06-24 7:07 ` Fam Zheng
2016-06-24 13:45 ` Kevin Wolf
2016-06-24 14:17 ` Eric Blake
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 21/22] block: Fix error message style Eric Blake
2016-06-24 7:09 ` Fam Zheng
2016-06-23 22:37 ` [Qemu-devel] [PATCH v3 22/22] block: Use bool as appropriate for BDS members Eric Blake
2016-06-24 7:12 ` Fam Zheng
2016-06-24 14:32 ` [Qemu-devel] [PATCH v3 00/22] Byte-based block limits Kevin Wolf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466721446-27737-2-git-send-email-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).