From: "Cédric Le Goater" <clg@kaod.org>
To: qemu-ppc@nongnu.org
Cc: David Gibson <david@gibson.dropbear.id.au>,
Alexander Graf <agraf@suse.de>,
qemu-devel@nongnu.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Cedric Le Goater <clg@kaod.org>
Subject: [Qemu-devel] [PATCH 6/8] ppc: Initial HDEC support
Date: Mon, 27 Jun 2016 08:55:19 +0200 [thread overview]
Message-ID: <1467010521-6106-7-git-send-email-clg@kaod.org> (raw)
In-Reply-To: <1467010521-6106-1-git-send-email-clg@kaod.org>
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The current behaviour isn't completely right, as for the DEC, we
don't properly re-arm when wrapping around, but I will fix this
in a separate patch.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: fixed checkpatch.pl errors ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
hw/ppc/ppc.c | 17 ++++++++++++-----
target-ppc/excp_helper.c | 22 ++++++++++++----------
target-ppc/helper.h | 2 ++
target-ppc/timebase_helper.c | 10 ++++++++++
target-ppc/translate_init.c | 30 ++++++++++++++++++++++++++++++
5 files changed, 66 insertions(+), 15 deletions(-)
diff --git a/hw/ppc/ppc.c b/hw/ppc/ppc.c
index 1bcf740f0e3c..e4252528a69d 100644
--- a/hw/ppc/ppc.c
+++ b/hw/ppc/ppc.c
@@ -699,9 +699,18 @@ static inline void cpu_ppc_decr_lower(PowerPCCPU *cpu)
static inline void cpu_ppc_hdecr_excp(PowerPCCPU *cpu)
{
+ CPUPPCState *env = &cpu->env;
+
/* Raise it */
- LOG_TB("raise decrementer exception\n");
- ppc_set_irq(cpu, PPC_INTERRUPT_HDECR, 1);
+ LOG_TB("raise hv decrementer exception\n");
+
+ /* The architecture specifies that we don't deliver HDEC
+ * interrupts in a PM state. Not only they don't cause a
+ * wakeup but they also get effectively discarded.
+ */
+ if (!env->in_pm_state) {
+ ppc_set_irq(cpu, PPC_INTERRUPT_HDECR, 1);
+ }
}
static inline void cpu_ppc_hdecr_lower(PowerPCCPU *cpu)
@@ -928,9 +937,7 @@ clk_setup_cb cpu_ppc_tb_init (CPUPPCState *env, uint32_t freq)
}
/* Create new timer */
tb_env->decr_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, &cpu_ppc_decr_cb, cpu);
- if (0) {
- /* XXX: find a suitable condition to enable the hypervisor decrementer
- */
+ if (env->has_hv_mode) {
tb_env->hdecr_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, &cpu_ppc_hdecr_cb,
cpu);
} else {
diff --git a/target-ppc/excp_helper.c b/target-ppc/excp_helper.c
index 26adda49b248..d6e1678a63d9 100644
--- a/target-ppc/excp_helper.c
+++ b/target-ppc/excp_helper.c
@@ -753,7 +753,6 @@ void ppc_cpu_do_interrupt(CPUState *cs)
static void ppc_hw_interrupt(CPUPPCState *env)
{
PowerPCCPU *cpu = ppc_env_get_cpu(env);
- int hdice;
#if 0
CPUState *cs = CPU(cpu);
@@ -781,15 +780,13 @@ static void ppc_hw_interrupt(CPUPPCState *env)
return;
}
#endif
- if (0) {
- /* XXX: find a suitable condition to enable the hypervisor mode */
- hdice = env->spr[SPR_LPCR] & 1;
- } else {
- hdice = 0;
- }
- if ((msr_ee != 0 || msr_hv == 0 || msr_pr != 0) && hdice != 0) {
- /* Hypervisor decrementer exception */
- if (env->pending_interrupts & (1 << PPC_INTERRUPT_HDECR)) {
+ /* Hypervisor decrementer exception */
+ if (env->pending_interrupts & (1 << PPC_INTERRUPT_HDECR)) {
+ /* LPCR will be clear when not supported so this will work */
+ bool hdice = !!(env->spr[SPR_LPCR] & LPCR_HDICE);
+ if ((msr_ee != 0 || msr_hv == 0) && hdice) {
+ /* HDEC clears on delivery */
+ env->pending_interrupts &= ~(1 << PPC_INTERRUPT_HDECR);
powerpc_excp(cpu, env->excp_model, POWERPC_EXCP_HDECR);
return;
}
@@ -941,6 +938,11 @@ void helper_pminsn(CPUPPCState *env, powerpc_pm_insn_t insn)
cs->halted = 1;
env->in_pm_state = true;
+ /* The architecture specifies that HDEC interrupts are
+ * discarded in PM states
+ */
+ env->pending_interrupts &= ~(1 << PPC_INTERRUPT_HDECR);
+
/* Technically, nap doesn't set EE, but if we don't set it
* then ppc_hw_interrupt() won't deliver. We could add some
* other tests there based on LPCR but it's simpler to just
diff --git a/target-ppc/helper.h b/target-ppc/helper.h
index c532b44847e4..1f5cfd099067 100644
--- a/target-ppc/helper.h
+++ b/target-ppc/helper.h
@@ -600,6 +600,8 @@ DEF_HELPER_2(store_601_rtcl, void, env, tl)
DEF_HELPER_2(store_601_rtcu, void, env, tl)
DEF_HELPER_1(load_decr, tl, env)
DEF_HELPER_2(store_decr, void, env, tl)
+DEF_HELPER_1(load_hdecr, tl, env)
+DEF_HELPER_2(store_hdecr, void, env, tl)
DEF_HELPER_2(store_hid0_601, void, env, tl)
DEF_HELPER_3(store_403_pbr, void, env, i32, tl)
DEF_HELPER_1(load_40x_pit, tl, env)
diff --git a/target-ppc/timebase_helper.c b/target-ppc/timebase_helper.c
index 66de3137e467..a07faa42cb97 100644
--- a/target-ppc/timebase_helper.c
+++ b/target-ppc/timebase_helper.c
@@ -102,6 +102,16 @@ void helper_store_decr(CPUPPCState *env, target_ulong val)
cpu_ppc_store_decr(env, val);
}
+target_ulong helper_load_hdecr(CPUPPCState *env)
+{
+ return cpu_ppc_load_hdecr(env);
+}
+
+void helper_store_hdecr(CPUPPCState *env, target_ulong val)
+{
+ cpu_ppc_store_hdecr(env, val);
+}
+
target_ulong helper_load_40x_pit(CPUPPCState *env)
{
return load_40x_pit(env);
diff --git a/target-ppc/translate_init.c b/target-ppc/translate_init.c
index af7a790f449f..a2d9ff2dd117 100644
--- a/target-ppc/translate_init.c
+++ b/target-ppc/translate_init.c
@@ -277,6 +277,32 @@ static void spr_read_purr (DisasContext *ctx, int gprn, int sprn)
{
gen_helper_load_purr(cpu_gpr[gprn], cpu_env);
}
+
+/* HDECR */
+static void spr_read_hdecr(DisasContext *ctx, int gprn, int sprn)
+{
+ if (ctx->tb->cflags & CF_USE_ICOUNT) {
+ gen_io_start();
+ }
+ gen_helper_load_hdecr(cpu_gpr[gprn], cpu_env);
+ if (ctx->tb->cflags & CF_USE_ICOUNT) {
+ gen_io_end();
+ gen_stop_exception(ctx);
+ }
+}
+
+static void spr_write_hdecr(DisasContext *ctx, int sprn, int gprn)
+{
+ if (ctx->tb->cflags & CF_USE_ICOUNT) {
+ gen_io_start();
+ }
+ gen_helper_store_hdecr(cpu_env, cpu_gpr[gprn]);
+ if (ctx->tb->cflags & CF_USE_ICOUNT) {
+ gen_io_end();
+ gen_stop_exception(ctx);
+ }
+}
+
#endif
#endif
@@ -7824,6 +7850,10 @@ static void gen_spr_power5p_lpar(CPUPPCState *env)
SPR_NOACCESS, SPR_NOACCESS,
&spr_read_generic, &spr_write_lpcr,
KVM_REG_PPC_LPCR, LPCR_LPES0 | LPCR_LPES1);
+ spr_register_hv(env, SPR_HDEC, "HDEC",
+ SPR_NOACCESS, SPR_NOACCESS,
+ SPR_NOACCESS, SPR_NOACCESS,
+ &spr_read_hdecr, &spr_write_hdecr, 0);
#endif
}
--
2.1.4
next prev parent reply other threads:[~2016-06-27 6:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-27 6:55 [Qemu-devel] [PATCH 0/8] pnv: more fixes to the exception model Cédric Le Goater
2016-06-27 6:55 ` [Qemu-devel] [PATCH 1/8] ppc: Add a bunch of hypervisor SPRs to Book3s Cédric Le Goater
2016-06-27 6:55 ` [Qemu-devel] [PATCH 2/8] ppc: Update LPCR definitions Cédric Le Goater
2016-06-27 6:55 ` [Qemu-devel] [PATCH 3/8] ppc: Use a helper to filter writes to LPCR Cédric Le Goater
2016-06-27 6:55 ` [Qemu-devel] [PATCH 4/8] ppc: Fix conditions for delivering external interrupts to a guest Cédric Le Goater
2016-06-27 6:55 ` [Qemu-devel] [PATCH 5/8] ppc: Enforce setting MSR:EE, IR and DR when MSR:PR is set Cédric Le Goater
2016-06-27 6:55 ` Cédric Le Goater [this message]
2016-06-27 6:55 ` [Qemu-devel] [PATCH 7/8] ppc: LPCR is a HV resource Cédric Le Goater
2016-06-27 6:55 ` [Qemu-devel] [PATCH 8/8] ppc: Print HSRR0/HSRR1 in "info registers" Cédric Le Goater
2016-06-28 5:39 ` [Qemu-devel] [PATCH 0/8] pnv: more fixes to the exception model David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467010521-6106-7-git-send-email-clg@kaod.org \
--to=clg@kaod.org \
--cc=agraf@suse.de \
--cc=benh@kernel.crashing.org \
--cc=david@gibson.dropbear.id.au \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).