[Qemu-devel] [PULL 08/18] palmetto-bmc: Configure the SCU's hardware strapping register

[Peter Maydell <peter.maydell@linaro.org>]

From: Andrew Jeffery <andrew@aj.id.au>

The magic constant configures the following options:

* 28:27: Configure DRAM size as 256MB
* 26:24: DDR3 SDRAM with CL = 6, CWL = 5
* 23: Configure 24/48MHz CLKIN
* 22: Disable GPIOE pass-through mode
* 21: Disable GPIOD pass-through mode
* 20: Enable LPC decode of SuperIO 0x2E/0x4E addresses
* 19: Disable ACPI
* 18: Configure 48MHz CLKIN
* 17: Disable BMC 2nd boot watchdog timer
* 16: Decode SuperIO address 0x2E
* 15: VGA Class Code
* 14: Enable LPC dedicated reset pin
* 13:12: Enable SPI Master and SPI Slave to AHB Bridge
* 11:10: Select CPU:AHB ratio = 2:1
* 9:8: Select 384MHz H-PLL
* 7: Configure MAC#2 for RMII/NCSI
* 6: Configure MAC#1 for RMII/NCSI
* 5: No VGA BIOS ROM
* 4: Boot using 32bit SPI address mode
* 3:2: Select 16MB VGA memory
* 1:0: Boot from SPI flash memory

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1466744305-23163-4-git-send-email-andrew@aj.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/palmetto-bmc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/hw/arm/palmetto-bmc.c b/hw/arm/palmetto-bmc.c
index a51d960..b8eed21 100644
--- a/hw/arm/palmetto-bmc.c
+++ b/hw/arm/palmetto-bmc.c
@@ -44,6 +44,8 @@ static void palmetto_bmc_init(MachineState *machine)
                                 &bmc->ram);
     object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
                                    &error_abort);
+    object_property_set_int(OBJECT(&bmc->soc), 0x120CE416, "hw-strap1",
+                            &error_abort);
     object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
                              &error_abort);
 
-- 
1.9.1