From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 14/43] block: Set request_alignment during .bdrv_refresh_limits()
Date: Tue, 5 Jul 2016 17:50:23 +0200 [thread overview]
Message-ID: <1467733852-27097-15-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1467733852-27097-1-git-send-email-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
We want to eventually stick request_alignment alongside other
BlockLimits, but first, we must ensure it is populated at the
same time as all other limits, rather than being a special case
that is set only when a block is first opened.
Add a .bdrv_refresh_limits() to all four of our legacy devices
that will always be sector-only (bochs, cloop, dmg, vvfat), in
spite of their recent conversion to expose a byte interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/bochs.c | 7 ++++++-
block/cloop.c | 7 ++++++-
block/dmg.c | 7 ++++++-
block/vvfat.c | 7 ++++++-
4 files changed, 24 insertions(+), 4 deletions(-)
diff --git a/block/bochs.c b/block/bochs.c
index 6c8d0f3..182c50b 100644
--- a/block/bochs.c
+++ b/block/bochs.c
@@ -105,7 +105,6 @@ static int bochs_open(BlockDriverState *bs, QDict *options, int flags,
int ret;
bs->read_only = 1; // no write support yet
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
ret = bdrv_pread(bs->file->bs, 0, &bochs, sizeof(bochs));
if (ret < 0) {
@@ -189,6 +188,11 @@ fail:
return ret;
}
+static void bochs_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+ bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+}
+
static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
{
BDRVBochsState *s = bs->opaque;
@@ -283,6 +287,7 @@ static BlockDriver bdrv_bochs = {
.instance_size = sizeof(BDRVBochsState),
.bdrv_probe = bochs_probe,
.bdrv_open = bochs_open,
+ .bdrv_refresh_limits = bochs_refresh_limits,
.bdrv_co_preadv = bochs_co_preadv,
.bdrv_close = bochs_close,
};
diff --git a/block/cloop.c b/block/cloop.c
index ea5a92b..d574003 100644
--- a/block/cloop.c
+++ b/block/cloop.c
@@ -67,7 +67,6 @@ static int cloop_open(BlockDriverState *bs, QDict *options, int flags,
int ret;
bs->read_only = 1;
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
/* read header */
ret = bdrv_pread(bs->file->bs, 128, &s->block_size, 4);
@@ -199,6 +198,11 @@ fail:
return ret;
}
+static void cloop_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+ bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+}
+
static inline int cloop_read_block(BlockDriverState *bs, int block_num)
{
BDRVCloopState *s = bs->opaque;
@@ -280,6 +284,7 @@ static BlockDriver bdrv_cloop = {
.instance_size = sizeof(BDRVCloopState),
.bdrv_probe = cloop_probe,
.bdrv_open = cloop_open,
+ .bdrv_refresh_limits = cloop_refresh_limits,
.bdrv_co_preadv = cloop_co_preadv,
.bdrv_close = cloop_close,
};
diff --git a/block/dmg.c b/block/dmg.c
index 06eb513..1e53cd8 100644
--- a/block/dmg.c
+++ b/block/dmg.c
@@ -439,7 +439,6 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
int ret;
bs->read_only = 1;
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
s->n_chunks = 0;
s->offsets = s->lengths = s->sectors = s->sectorcounts = NULL;
@@ -547,6 +546,11 @@ fail:
return ret;
}
+static void dmg_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+ bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+}
+
static inline int is_sector_in_chunk(BDRVDMGState* s,
uint32_t chunk_num, uint64_t sector_num)
{
@@ -720,6 +724,7 @@ static BlockDriver bdrv_dmg = {
.instance_size = sizeof(BDRVDMGState),
.bdrv_probe = dmg_probe,
.bdrv_open = dmg_open,
+ .bdrv_refresh_limits = dmg_refresh_limits,
.bdrv_co_preadv = dmg_co_preadv,
.bdrv_close = dmg_close,
};
diff --git a/block/vvfat.c b/block/vvfat.c
index 5569450..4d44636 100644
--- a/block/vvfat.c
+++ b/block/vvfat.c
@@ -1177,7 +1177,6 @@ static int vvfat_open(BlockDriverState *bs, QDict *options, int flags,
bs->read_only = 0;
}
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
bs->total_sectors = cyls * heads * secs;
if (init_directories(s, dirname, heads, secs, errp)) {
@@ -1209,6 +1208,11 @@ fail:
return ret;
}
+static void vvfat_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+ bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+}
+
static inline void vvfat_close_current_file(BDRVVVFATState *s)
{
if(s->current_mapping) {
@@ -3046,6 +3050,7 @@ static BlockDriver bdrv_vvfat = {
.bdrv_parse_filename = vvfat_parse_filename,
.bdrv_file_open = vvfat_open,
+ .bdrv_refresh_limits = vvfat_refresh_limits,
.bdrv_close = vvfat_close,
.bdrv_co_preadv = vvfat_co_preadv,
--
1.8.3.1
next prev parent reply other threads:[~2016-07-05 15:51 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-05 15:50 [Qemu-devel] [PULL 00/43] Block layer patches Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 01/43] qemu-img: fix failed autotests Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 02/43] block: Tighter assertions on bdrv_aligned_pwritev() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 03/43] block: Document supported flags during bdrv_aligned_preadv() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 04/43] block: Fix harmless off-by-one in bdrv_aligned_preadv() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 05/43] nbd: Allow larger requests Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 06/43] nbd: Advertise realistic limits to block layer Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 07/43] iscsi: " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 08/43] scsi: Advertise limits by blocksize, not 512 Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 09/43] block: Give nonzero result to blk_get_max_transfer_length() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 10/43] blkdebug: Set request_alignment during .bdrv_refresh_limits() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 11/43] iscsi: " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 12/43] qcow2: " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 13/43] raw-win32: " Kevin Wolf
2016-07-05 15:50 ` Kevin Wolf [this message]
2016-07-05 15:50 ` [Qemu-devel] [PULL 15/43] block: Set default request_alignment during bdrv_refresh_limits() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 16/43] block: Switch transfer length bounds to byte-based Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 17/43] block: Wording tweaks to write zeroes limits Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 18/43] block: Switch discard length bounds to byte-based Kevin Wolf
2016-07-06 2:14 ` Eric Blake
2016-07-06 8:27 ` Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 19/43] block: Drop raw_refresh_limits() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 20/43] block: Split bdrv_merge_limits() from bdrv_refresh_limits() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 21/43] block: Move request_alignment into BlockLimit Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 22/43] block: Fix error message style Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 23/43] block: Use bool as appropriate for BDS members Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 24/43] block: fix return code for partial write for Linux AIO Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 25/43] block/qdev: Fix NULL access when using BB twice Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 26/43] vvfat: Use BdrvChild for s->qcow Kevin Wolf
2016-07-11 14:02 ` Paolo Bonzini
2016-07-05 15:50 ` [Qemu-devel] [PULL 27/43] blkreplay: Convert to byte-based I/O Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 28/43] vhdx: Some more BlockBackend use in vhdx_create() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 29/43] block: Convert bdrv_co_readv() to BdrvChild Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 30/43] block: Convert bdrv_co_writev() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 31/43] block: Convert bdrv_aio_readv() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 32/43] block: Convert bdrv_aio_writev() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 33/43] block: Convert bdrv_co_do_readv/writev " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 34/43] block: Move bdrv_commit() to block/commit.c Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 35/43] block: Use BlockBackend for I/O in bdrv_commit() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 36/43] block: Convert bdrv_read() to BdrvChild Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 37/43] block: Convert bdrv_write() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 38/43] block: Convert bdrv_pread(v) " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 39/43] block: Convert bdrv_pwrite(v/_sync) " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 40/43] block: Convert bdrv_pwrite_zeroes() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 41/43] block: Convert bdrv_prwv_co() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 42/43] block: Convert bdrv_co_preadv/pwritev " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 43/43] block/qcow2: Don't use cpu_to_*w() Kevin Wolf
2016-07-06 9:23 ` [Qemu-devel] [PULL 00/43] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467733852-27097-15-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).