From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 21/43] block: Move request_alignment into BlockLimit
Date: Tue, 5 Jul 2016 17:50:30 +0200 [thread overview]
Message-ID: <1467733852-27097-22-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1467733852-27097-1-git-send-email-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
It makes more sense to have ALL block size limit constraints
in the same struct. Improve the documentation while at it.
Simplify a couple of conditionals, now that we have audited and
documented that request_alignment is always non-zero.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block.c | 2 +-
block/blkdebug.c | 2 +-
block/bochs.c | 2 +-
block/cloop.c | 2 +-
block/dmg.c | 2 +-
block/io.c | 14 +++++++-------
block/iscsi.c | 2 +-
block/qcow2.c | 2 +-
block/raw-posix.c | 16 ++++++++--------
block/raw-win32.c | 6 +++---
block/vvfat.c | 2 +-
include/block/block_int.h | 22 +++++++++++++---------
12 files changed, 39 insertions(+), 35 deletions(-)
diff --git a/block.c b/block.c
index c2fbf06..34894ad 100644
--- a/block.c
+++ b/block.c
@@ -1016,7 +1016,7 @@ static int bdrv_open_common(BlockDriverState *bs, BdrvChild *file,
assert(bdrv_opt_mem_align(bs) != 0);
assert(bdrv_min_mem_align(bs) != 0);
- assert(is_power_of_2(bs->request_alignment) || bdrv_is_sg(bs));
+ assert(is_power_of_2(bs->bl.request_alignment));
qemu_opts_del(opts);
return 0;
diff --git a/block/blkdebug.c b/block/blkdebug.c
index 54b6870..b6ecee3 100644
--- a/block/blkdebug.c
+++ b/block/blkdebug.c
@@ -726,7 +726,7 @@ static void blkdebug_refresh_limits(BlockDriverState *bs, Error **errp)
BDRVBlkdebugState *s = bs->opaque;
if (s->align) {
- bs->request_alignment = s->align;
+ bs->bl.request_alignment = s->align;
}
}
diff --git a/block/bochs.c b/block/bochs.c
index 182c50b..4194f1d 100644
--- a/block/bochs.c
+++ b/block/bochs.c
@@ -190,7 +190,7 @@ fail:
static void bochs_refresh_limits(BlockDriverState *bs, Error **errp)
{
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+ bs->bl.request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O */
}
static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
diff --git a/block/cloop.c b/block/cloop.c
index d574003..b5dc286 100644
--- a/block/cloop.c
+++ b/block/cloop.c
@@ -200,7 +200,7 @@ fail:
static void cloop_refresh_limits(BlockDriverState *bs, Error **errp)
{
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+ bs->bl.request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O */
}
static inline int cloop_read_block(BlockDriverState *bs, int block_num)
diff --git a/block/dmg.c b/block/dmg.c
index 1e53cd8..9612c21 100644
--- a/block/dmg.c
+++ b/block/dmg.c
@@ -548,7 +548,7 @@ fail:
static void dmg_refresh_limits(BlockDriverState *bs, Error **errp)
{
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+ bs->bl.request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O */
}
static inline int is_sector_in_chunk(BDRVDMGState* s,
diff --git a/block/io.c b/block/io.c
index 69dbbd3..b9e53e3 100644
--- a/block/io.c
+++ b/block/io.c
@@ -90,7 +90,7 @@ void bdrv_refresh_limits(BlockDriverState *bs, Error **errp)
}
/* Default alignment based on whether driver has byte interface */
- bs->request_alignment = drv->bdrv_co_preadv ? 1 : 512;
+ bs->bl.request_alignment = drv->bdrv_co_preadv ? 1 : 512;
/* Take some limits from the children as a default */
if (bs->file) {
@@ -459,7 +459,7 @@ static int bdrv_get_cluster_size(BlockDriverState *bs)
ret = bdrv_get_info(bs, &bdi);
if (ret < 0 || bdi.cluster_size == 0) {
- return bs->request_alignment;
+ return bs->bl.request_alignment;
} else {
return bdi.cluster_size;
}
@@ -1068,7 +1068,7 @@ int coroutine_fn bdrv_co_preadv(BlockDriverState *bs,
BlockDriver *drv = bs->drv;
BdrvTrackedRequest req;
- uint64_t align = bs->request_alignment;
+ uint64_t align = bs->bl.request_alignment;
uint8_t *head_buf = NULL;
uint8_t *tail_buf = NULL;
QEMUIOVector local_qiov;
@@ -1164,8 +1164,8 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
int tail = 0;
int max_write_zeroes = MIN_NON_ZERO(bs->bl.max_pwrite_zeroes, INT_MAX);
- int alignment = MAX(bs->bl.pwrite_zeroes_alignment ?: 1,
- bs->request_alignment);
+ int alignment = MAX(bs->bl.pwrite_zeroes_alignment,
+ bs->bl.request_alignment);
assert(is_power_of_2(alignment));
head = offset & (alignment - 1);
@@ -1324,7 +1324,7 @@ static int coroutine_fn bdrv_co_do_zero_pwritev(BlockDriverState *bs,
uint8_t *buf = NULL;
QEMUIOVector local_qiov;
struct iovec iov;
- uint64_t align = bs->request_alignment;
+ uint64_t align = bs->bl.request_alignment;
unsigned int head_padding_bytes, tail_padding_bytes;
int ret = 0;
@@ -1411,7 +1411,7 @@ int coroutine_fn bdrv_co_pwritev(BlockDriverState *bs,
BdrvRequestFlags flags)
{
BdrvTrackedRequest req;
- uint64_t align = bs->request_alignment;
+ uint64_t align = bs->bl.request_alignment;
uint8_t *head_buf = NULL;
uint8_t *tail_buf = NULL;
QEMUIOVector local_qiov;
diff --git a/block/iscsi.c b/block/iscsi.c
index 342f6b8..b73fd0a 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -1705,7 +1705,7 @@ static void iscsi_refresh_limits(BlockDriverState *bs, Error **errp)
IscsiLun *iscsilun = bs->opaque;
uint64_t max_xfer_len = iscsilun->use_16_for_rw ? 0xffffffff : 0xffff;
- bs->request_alignment = iscsilun->block_size;
+ bs->bl.request_alignment = iscsilun->block_size;
if (iscsilun->bl.max_xfer_len) {
max_xfer_len = MIN(max_xfer_len, iscsilun->bl.max_xfer_len);
diff --git a/block/qcow2.c b/block/qcow2.c
index 48f80b6..fdf13cb 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1201,7 +1201,7 @@ static void qcow2_refresh_limits(BlockDriverState *bs, Error **errp)
if (bs->encrypted) {
/* Encryption works on a sector granularity */
- bs->request_alignment = BDRV_SECTOR_SIZE;
+ bs->bl.request_alignment = BDRV_SECTOR_SIZE;
}
bs->bl.pwrite_zeroes_alignment = s->cluster_size;
}
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 8da2f94..d3d7cce 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -302,22 +302,22 @@ static void raw_probe_alignment(BlockDriverState *bs, int fd, Error **errp)
/* For SCSI generic devices the alignment is not really used.
With buffered I/O, we don't have any restrictions. */
if (bdrv_is_sg(bs) || !s->needs_alignment) {
- bs->request_alignment = 1;
+ bs->bl.request_alignment = 1;
s->buf_align = 1;
return;
}
- bs->request_alignment = 0;
+ bs->bl.request_alignment = 0;
s->buf_align = 0;
/* Let's try to use the logical blocksize for the alignment. */
- if (probe_logical_blocksize(fd, &bs->request_alignment) < 0) {
- bs->request_alignment = 0;
+ if (probe_logical_blocksize(fd, &bs->bl.request_alignment) < 0) {
+ bs->bl.request_alignment = 0;
}
#ifdef CONFIG_XFS
if (s->is_xfs) {
struct dioattr da;
if (xfsctl(NULL, fd, XFS_IOC_DIOINFO, &da) >= 0) {
- bs->request_alignment = da.d_miniosz;
+ bs->bl.request_alignment = da.d_miniosz;
/* The kernel returns wrong information for d_mem */
/* s->buf_align = da.d_mem; */
}
@@ -337,19 +337,19 @@ static void raw_probe_alignment(BlockDriverState *bs, int fd, Error **errp)
qemu_vfree(buf);
}
- if (!bs->request_alignment) {
+ if (!bs->bl.request_alignment) {
size_t align;
buf = qemu_memalign(s->buf_align, max_align);
for (align = 512; align <= max_align; align <<= 1) {
if (raw_is_io_aligned(fd, buf, align)) {
- bs->request_alignment = align;
+ bs->bl.request_alignment = align;
break;
}
}
qemu_vfree(buf);
}
- if (!s->buf_align || !bs->request_alignment) {
+ if (!s->buf_align || !bs->bl.request_alignment) {
error_setg(errp, "Could not find working O_DIRECT alignment. "
"Try cache.direct=off.");
}
diff --git a/block/raw-win32.c b/block/raw-win32.c
index 88382d9..62edb1a 100644
--- a/block/raw-win32.c
+++ b/block/raw-win32.c
@@ -230,14 +230,14 @@ static void raw_probe_alignment(BlockDriverState *bs, Error **errp)
BOOL status;
if (s->type == FTYPE_CD) {
- bs->request_alignment = 2048;
+ bs->bl.request_alignment = 2048;
return;
}
if (s->type == FTYPE_HARDDISK) {
status = DeviceIoControl(s->hfile, IOCTL_DISK_GET_DRIVE_GEOMETRY_EX,
NULL, 0, &dg, sizeof(dg), &count, NULL);
if (status != 0) {
- bs->request_alignment = dg.Geometry.BytesPerSector;
+ bs->bl.request_alignment = dg.Geometry.BytesPerSector;
return;
}
/* try GetDiskFreeSpace too */
@@ -247,7 +247,7 @@ static void raw_probe_alignment(BlockDriverState *bs, Error **errp)
GetDiskFreeSpace(s->drive_path, §orsPerCluster,
&dg.Geometry.BytesPerSector,
&freeClusters, &totalClusters);
- bs->request_alignment = dg.Geometry.BytesPerSector;
+ bs->bl.request_alignment = dg.Geometry.BytesPerSector;
}
}
diff --git a/block/vvfat.c b/block/vvfat.c
index 4d44636..fc948cb 100644
--- a/block/vvfat.c
+++ b/block/vvfat.c
@@ -1210,7 +1210,7 @@ fail:
static void vvfat_refresh_limits(BlockDriverState *bs, Error **errp)
{
- bs->request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O supported */
+ bs->bl.request_alignment = BDRV_SECTOR_SIZE; /* No sub-sector I/O */
}
static inline void vvfat_close_current_file(BDRVVVFATState *s)
diff --git a/include/block/block_int.h b/include/block/block_int.h
index a3e69fd..8f061eb 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -324,6 +324,12 @@ struct BlockDriver {
};
typedef struct BlockLimits {
+ /* Alignment requirement, in bytes, for offset/length of I/O
+ * requests. Must be a power of 2 less than INT_MAX; defaults to
+ * 1 for drivers with modern byte interfaces, and to 512
+ * otherwise. */
+ uint32_t request_alignment;
+
/* maximum number of bytes that can be discarded at once (since it
* is signed, it must be < 2G, if set), should be multiple of
* pdiscard_alignment, but need not be power of 2. May be 0 if no
@@ -332,8 +338,8 @@ typedef struct BlockLimits {
/* optimal alignment for discard requests in bytes, must be power
* of 2, less than max_pdiscard if that is set, and multiple of
- * bs->request_alignment. May be 0 if bs->request_alignment is
- * good enough */
+ * bl.request_alignment. May be 0 if bl.request_alignment is good
+ * enough */
uint32_t pdiscard_alignment;
/* maximum number of bytes that can zeroized at once (since it is
@@ -343,12 +349,12 @@ typedef struct BlockLimits {
/* optimal alignment for write zeroes requests in bytes, must be
* power of 2, less than max_pwrite_zeroes if that is set, and
- * multiple of bs->request_alignment. May be 0 if
- * bs->request_alignment is good enough */
+ * multiple of bl.request_alignment. May be 0 if
+ * bl.request_alignment is good enough */
uint32_t pwrite_zeroes_alignment;
/* optimal transfer length in bytes (must be power of 2, and
- * multiple of bs->request_alignment), or 0 if no preferred size */
+ * multiple of bl.request_alignment), or 0 if no preferred size */
uint32_t opt_transfer;
/* maximal transfer length in bytes (need not be power of 2, but
@@ -356,10 +362,10 @@ typedef struct BlockLimits {
* For now, anything larger than INT_MAX is clamped down. */
uint32_t max_transfer;
- /* memory alignment so that no bounce buffer is needed */
+ /* memory alignment, in bytes so that no bounce buffer is needed */
size_t min_mem_alignment;
- /* memory alignment for bounce buffer */
+ /* memory alignment, in bytes, for bounce buffer */
size_t opt_mem_alignment;
/* maximum number of iovec elements */
@@ -465,8 +471,6 @@ struct BlockDriverState {
/* I/O Limits */
BlockLimits bl;
- /* Alignment requirement for offset/length of I/O requests */
- unsigned int request_alignment;
/* Flags honored during pwrite (so far: BDRV_REQ_FUA) */
unsigned int supported_write_flags;
/* Flags honored during pwrite_zeroes (so far: BDRV_REQ_FUA,
--
1.8.3.1
next prev parent reply other threads:[~2016-07-05 15:51 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-05 15:50 [Qemu-devel] [PULL 00/43] Block layer patches Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 01/43] qemu-img: fix failed autotests Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 02/43] block: Tighter assertions on bdrv_aligned_pwritev() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 03/43] block: Document supported flags during bdrv_aligned_preadv() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 04/43] block: Fix harmless off-by-one in bdrv_aligned_preadv() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 05/43] nbd: Allow larger requests Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 06/43] nbd: Advertise realistic limits to block layer Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 07/43] iscsi: " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 08/43] scsi: Advertise limits by blocksize, not 512 Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 09/43] block: Give nonzero result to blk_get_max_transfer_length() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 10/43] blkdebug: Set request_alignment during .bdrv_refresh_limits() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 11/43] iscsi: " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 12/43] qcow2: " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 13/43] raw-win32: " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 14/43] block: " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 15/43] block: Set default request_alignment during bdrv_refresh_limits() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 16/43] block: Switch transfer length bounds to byte-based Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 17/43] block: Wording tweaks to write zeroes limits Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 18/43] block: Switch discard length bounds to byte-based Kevin Wolf
2016-07-06 2:14 ` Eric Blake
2016-07-06 8:27 ` Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 19/43] block: Drop raw_refresh_limits() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 20/43] block: Split bdrv_merge_limits() from bdrv_refresh_limits() Kevin Wolf
2016-07-05 15:50 ` Kevin Wolf [this message]
2016-07-05 15:50 ` [Qemu-devel] [PULL 22/43] block: Fix error message style Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 23/43] block: Use bool as appropriate for BDS members Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 24/43] block: fix return code for partial write for Linux AIO Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 25/43] block/qdev: Fix NULL access when using BB twice Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 26/43] vvfat: Use BdrvChild for s->qcow Kevin Wolf
2016-07-11 14:02 ` Paolo Bonzini
2016-07-05 15:50 ` [Qemu-devel] [PULL 27/43] blkreplay: Convert to byte-based I/O Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 28/43] vhdx: Some more BlockBackend use in vhdx_create() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 29/43] block: Convert bdrv_co_readv() to BdrvChild Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 30/43] block: Convert bdrv_co_writev() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 31/43] block: Convert bdrv_aio_readv() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 32/43] block: Convert bdrv_aio_writev() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 33/43] block: Convert bdrv_co_do_readv/writev " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 34/43] block: Move bdrv_commit() to block/commit.c Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 35/43] block: Use BlockBackend for I/O in bdrv_commit() Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 36/43] block: Convert bdrv_read() to BdrvChild Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 37/43] block: Convert bdrv_write() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 38/43] block: Convert bdrv_pread(v) " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 39/43] block: Convert bdrv_pwrite(v/_sync) " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 40/43] block: Convert bdrv_pwrite_zeroes() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 41/43] block: Convert bdrv_prwv_co() " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 42/43] block: Convert bdrv_co_preadv/pwritev " Kevin Wolf
2016-07-05 15:50 ` [Qemu-devel] [PULL 43/43] block/qcow2: Don't use cpu_to_*w() Kevin Wolf
2016-07-06 9:23 ` [Qemu-devel] [PULL 00/43] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467733852-27097-22-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).