qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Cc: patches@linaro.org
Subject: [Qemu-devel] [PATCH v2 2/5] hw/bt: Don't use cpu_to_*w() and *_to_cpup()
Date: Thu,  7 Jul 2016 17:20:57 +0100	[thread overview]
Message-ID: <1467908460-27048-3-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1467908460-27048-1-git-send-email-peter.maydell@linaro.org>

Don't use cpu_to_*w() and *_to_cpup() to do byte-swapped loads
and stores; instead use ld*_p() and st*_p() which correctly handle
misaligned accesses.

Bring the HNDL() macro into line with how we deal with
PARAMHANDLE(), by using cpu_to_le16() rather than an ifdef
HOST_WORDS_BIGENDIAN.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
 hw/bt/hci.c   | 10 +++-------
 hw/bt/l2cap.c | 12 ++++++------
 2 files changed, 9 insertions(+), 13 deletions(-)

diff --git a/hw/bt/hci.c b/hw/bt/hci.c
index 7d52205..351123f 100644
--- a/hw/bt/hci.c
+++ b/hw/bt/hci.c
@@ -426,11 +426,7 @@ static void bt_submit_raw_acl(struct bt_piconet_s *net, int length, uint8_t *dat
  * be continuously allocated.  We do it though, to preserve similar
  * behaviour between hosts.  Some things, like the BD_ADDR cannot be
  * preserved though (for example if a real hci is used).  */
-#ifdef HOST_WORDS_BIGENDIAN
-# define HNDL(raw)	bswap16(raw)
-#else
-# define HNDL(raw)	(raw)
-#endif
+#define HNDL(raw) cpu_to_le16(raw)
 
 static const uint8_t bt_event_reserved_mask[8] = {
     0xff, 0x9f, 0xfb, 0xff, 0x07, 0x18, 0x00, 0x00,
@@ -1504,8 +1500,8 @@ static void bt_submit_hci(struct HCIInfo *info,
         return;
 
 #define PARAM(cmd, param)	(((cmd##_cp *) data)->param)
-#define PARAM16(cmd, param)	le16_to_cpup(&PARAM(cmd, param))
-#define PARAMHANDLE(cmd)	HNDL(PARAM(cmd, handle))
+#define PARAM16(cmd, param) lduw_le_p(&PARAM(cmd, param))
+#define PARAMHANDLE(cmd) PARAM16(cmd, handle)
 #define LENGTH_CHECK(cmd)	if (length < sizeof(cmd##_cp)) goto short_hci
     /* Note: the supported commands bitmask in bt_hci_read_local_commands_rp
      * needs to be updated every time a command is implemented here!  */
diff --git a/hw/bt/l2cap.c b/hw/bt/l2cap.c
index dfc95ed..e342045 100644
--- a/hw/bt/l2cap.c
+++ b/hw/bt/l2cap.c
@@ -526,9 +526,9 @@ static int l2cap_channel_config(struct l2cap_instance_s *l2cap,
             }
 
             /* MTU */
-            val = le16_to_cpup((void *) opt->val);
+            val = lduw_le_p(opt->val);
             if (val < ch->min_mtu) {
-                cpu_to_le16w((void *) opt->val, ch->min_mtu);
+                stw_le_p(opt->val, ch->min_mtu);
                 result = L2CAP_CONF_UNACCEPT;
                 break;
             }
@@ -543,7 +543,7 @@ static int l2cap_channel_config(struct l2cap_instance_s *l2cap,
             }
 
             /* Flush Timeout */
-            val = le16_to_cpup((void *) opt->val);
+            val = lduw_le_p(opt->val);
             if (val < 0x0001) {
                 opt->val[0] = 0xff;
                 opt->val[1] = 0xff;
@@ -987,7 +987,7 @@ static void l2cap_bframe_in(struct l2cap_chan_s *ch, uint16_t cid,
 static void l2cap_iframe_in(struct l2cap_chan_s *ch, uint16_t cid,
                 const l2cap_hdr *hdr, int len)
 {
-    uint16_t fcs = le16_to_cpup((void *) (hdr->data + len - 2));
+    uint16_t fcs = lduw_le_p(hdr->data + len - 2);
 
     if (len < 4)
         goto len_error;
@@ -1002,7 +1002,7 @@ static void l2cap_iframe_in(struct l2cap_chan_s *ch, uint16_t cid,
             /* TODO: Signal an error? */
             return;
         }
-        l2cap_sframe_in(ch, le16_to_cpup((void *) hdr->data));
+        l2cap_sframe_in(ch, lduw_le_p(hdr->data));
         return;
     }
 
@@ -1022,7 +1022,7 @@ static void l2cap_iframe_in(struct l2cap_chan_s *ch, uint16_t cid,
         if (len - 6 > ch->mps)
             goto len_error;
 
-        ch->len_total = le16_to_cpup((void *) (hdr->data + 2));
+        ch->len_total = lduw_le_p(hdr->data + 2);
         if (len >= 6 + ch->len_total)
             goto seg_error;
 
-- 
1.9.1

  parent reply	other threads:[~2016-07-07 16:24 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-07 16:20 [Qemu-devel] [PATCH v2 0/5] Drop cpu_to_*w, *_to_cpup, document cpu_to_*, *_to_cpu Peter Maydell
2016-07-07 16:20 ` [Qemu-devel] [PATCH v2 1/5] fsdev/9p-iov-marshal.c: Don't use cpu_to_*w() functions Peter Maydell
2016-07-07 16:20 ` Peter Maydell [this message]
2016-07-07 16:20 ` [Qemu-devel] [PATCH v2 3/5] bswap.h: Remove unused cpu_to_*w() and *_to_cpup() Peter Maydell
2016-07-07 16:20 ` [Qemu-devel] [PATCH v2 4/5] bswap.h: Fix comment typo Peter Maydell
2016-07-07 16:21 ` [Qemu-devel] [PATCH v2 5/5] bswap.h: Document cpu_to_* and *_to_cpu conversion functions Peter Maydell
2016-07-12 15:04 ` [Qemu-devel] [PATCH v2 0/5] Drop cpu_to_*w, *_to_cpup, document cpu_to_*, *_to_cpu Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467908460-27048-3-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=patches@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).