From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, mark.cave-ayland@ilande.co.uk
Subject: [Qemu-devel] [PULL 09/24] target-sparc: Import linux/arch/sparc/include/uapi/asm/asi.h
Date: Tue, 12 Jul 2016 12:02:03 -0700 [thread overview]
Message-ID: <1468350138-9736-10-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1468350138-9736-1-git-send-email-rth@twiddle.net>
Copied from tag v4.2, 64291f7db5bd8150a74ad2036f1037e6a0428df2.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
target-sparc/asi.h | 297 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 297 insertions(+)
create mode 100644 target-sparc/asi.h
diff --git a/target-sparc/asi.h b/target-sparc/asi.h
new file mode 100644
index 0000000..aace6f3
--- /dev/null
+++ b/target-sparc/asi.h
@@ -0,0 +1,297 @@
+#ifndef _SPARC_ASI_H
+#define _SPARC_ASI_H
+
+/* asi.h: Address Space Identifier values for the sparc.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au)
+ * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su>
+ */
+
+/* The first batch are for the sun4c. */
+
+#define ASI_NULL1 0x00
+#define ASI_NULL2 0x01
+
+/* sun4c and sun4 control registers and mmu/vac ops */
+#define ASI_CONTROL 0x02
+#define ASI_SEGMAP 0x03
+#define ASI_PTE 0x04
+#define ASI_HWFLUSHSEG 0x05
+#define ASI_HWFLUSHPAGE 0x06
+#define ASI_REGMAP 0x06
+#define ASI_HWFLUSHCONTEXT 0x07
+
+#define ASI_USERTXT 0x08
+#define ASI_KERNELTXT 0x09
+#define ASI_USERDATA 0x0a
+#define ASI_KERNELDATA 0x0b
+
+/* VAC Cache flushing on sun4c and sun4 */
+#define ASI_FLUSHSEG 0x0c
+#define ASI_FLUSHPG 0x0d
+#define ASI_FLUSHCTX 0x0e
+
+/* SPARCstation-5: only 6 bits are decoded. */
+/* wo = Write Only, rw = Read Write; */
+/* ss = Single Size, as = All Sizes; */
+#define ASI_M_RES00 0x00 /* Don't touch... */
+#define ASI_M_UNA01 0x01 /* Same here... */
+#define ASI_M_MXCC 0x02 /* Access to TI VIKING MXCC registers */
+#define ASI_M_FLUSH_PROBE 0x03 /* Reference MMU Flush/Probe; rw, ss */
+#define ASI_M_MMUREGS 0x04 /* MMU Registers; rw, ss */
+#define ASI_M_TLBDIAG 0x05 /* MMU TLB only Diagnostics */
+#define ASI_M_DIAGS 0x06 /* Reference MMU Diagnostics */
+#define ASI_M_IODIAG 0x07 /* MMU I/O TLB only Diagnostics */
+#define ASI_M_USERTXT 0x08 /* Same as ASI_USERTXT; rw, as */
+#define ASI_M_KERNELTXT 0x09 /* Same as ASI_KERNELTXT; rw, as */
+#define ASI_M_USERDATA 0x0A /* Same as ASI_USERDATA; rw, as */
+#define ASI_M_KERNELDATA 0x0B /* Same as ASI_KERNELDATA; rw, as */
+#define ASI_M_TXTC_TAG 0x0C /* Instruction Cache Tag; rw, ss */
+#define ASI_M_TXTC_DATA 0x0D /* Instruction Cache Data; rw, ss */
+#define ASI_M_DATAC_TAG 0x0E /* Data Cache Tag; rw, ss */
+#define ASI_M_DATAC_DATA 0x0F /* Data Cache Data; rw, ss */
+
+/* The following cache flushing ASIs work only with the 'sta'
+ * instruction. Results are unpredictable for 'swap' and 'ldstuba',
+ * so don't do it.
+ */
+
+/* These ASI flushes affect external caches too. */
+#define ASI_M_FLUSH_PAGE 0x10 /* Flush I&D Cache Line (page); wo, ss */
+#define ASI_M_FLUSH_SEG 0x11 /* Flush I&D Cache Line (seg); wo, ss */
+#define ASI_M_FLUSH_REGION 0x12 /* Flush I&D Cache Line (region); wo, ss */
+#define ASI_M_FLUSH_CTX 0x13 /* Flush I&D Cache Line (context); wo, ss */
+#define ASI_M_FLUSH_USER 0x14 /* Flush I&D Cache Line (user); wo, ss */
+
+/* Block-copy operations are available only on certain V8 cpus. */
+#define ASI_M_BCOPY 0x17 /* Block copy */
+
+/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */
+#define ASI_M_IFLUSH_PAGE 0x18 /* Flush I Cache Line (page); wo, ss */
+#define ASI_M_IFLUSH_SEG 0x19 /* Flush I Cache Line (seg); wo, ss */
+#define ASI_M_IFLUSH_REGION 0x1A /* Flush I Cache Line (region); wo, ss */
+#define ASI_M_IFLUSH_CTX 0x1B /* Flush I Cache Line (context); wo, ss */
+#define ASI_M_IFLUSH_USER 0x1C /* Flush I Cache Line (user); wo, ss */
+
+/* Block-fill operations are available on certain V8 cpus */
+#define ASI_M_BFILL 0x1F
+
+/* This allows direct access to main memory, actually 0x20 to 0x2f are
+ * the available ASI's for physical ram pass-through, but I don't have
+ * any idea what the other ones do....
+ */
+
+#define ASI_M_BYPASS 0x20 /* Reference MMU bypass; rw, as */
+#define ASI_M_FBMEM 0x29 /* Graphics card frame buffer access */
+#define ASI_M_VMEUS 0x2A /* VME user 16-bit access */
+#define ASI_M_VMEPS 0x2B /* VME priv 16-bit access */
+#define ASI_M_VMEUT 0x2C /* VME user 32-bit access */
+#define ASI_M_VMEPT 0x2D /* VME priv 32-bit access */
+#define ASI_M_SBUS 0x2E /* Direct SBus access */
+#define ASI_M_CTL 0x2F /* Control Space (ECC and MXCC are here) */
+
+
+/* This is ROSS HyperSparc only. */
+#define ASI_M_FLUSH_IWHOLE 0x31 /* Flush entire ICACHE; wo, ss */
+
+/* Tsunami/Viking/TurboSparc i/d cache flash clear. */
+#define ASI_M_IC_FLCLEAR 0x36
+#define ASI_M_DC_FLCLEAR 0x37
+
+#define ASI_M_DCDR 0x39 /* Data Cache Diagnostics Register rw, ss */
+
+#define ASI_M_VIKING_TMP1 0x40 /* Emulation temporary 1 on Viking */
+/* only available on SuperSparc I */
+/* #define ASI_M_VIKING_TMP2 0x41 */ /* Emulation temporary 2 on Viking */
+
+#define ASI_M_ACTION 0x4c /* Breakpoint Action Register (GNU/Viking) */
+
+/* LEON ASI */
+#define ASI_LEON_NOCACHE 0x01
+
+#define ASI_LEON_DCACHE_MISS 0x01
+
+#define ASI_LEON_CACHEREGS 0x02
+#define ASI_LEON_IFLUSH 0x10
+#define ASI_LEON_DFLUSH 0x11
+
+#define ASI_LEON_MMUFLUSH 0x18
+#define ASI_LEON_MMUREGS 0x19
+#define ASI_LEON_BYPASS 0x1c
+#define ASI_LEON_FLUSH_PAGE 0x10
+
+/* V9 Architecture mandary ASIs. */
+#define ASI_N 0x04 /* Nucleus */
+#define ASI_NL 0x0c /* Nucleus, little endian */
+#define ASI_AIUP 0x10 /* Primary, user */
+#define ASI_AIUS 0x11 /* Secondary, user */
+#define ASI_AIUPL 0x18 /* Primary, user, little endian */
+#define ASI_AIUSL 0x19 /* Secondary, user, little endian */
+#define ASI_P 0x80 /* Primary, implicit */
+#define ASI_S 0x81 /* Secondary, implicit */
+#define ASI_PNF 0x82 /* Primary, no fault */
+#define ASI_SNF 0x83 /* Secondary, no fault */
+#define ASI_PL 0x88 /* Primary, implicit, l-endian */
+#define ASI_SL 0x89 /* Secondary, implicit, l-endian */
+#define ASI_PNFL 0x8a /* Primary, no fault, l-endian */
+#define ASI_SNFL 0x8b /* Secondary, no fault, l-endian */
+
+/* SpitFire and later extended ASIs. The "(III)" marker designates
+ * UltraSparc-III and later specific ASIs. The "(CMT)" marker designates
+ * Chip Multi Threading specific ASIs. "(NG)" designates Niagara specific
+ * ASIs, "(4V)" designates SUN4V specific ASIs. "(NG4)" designates SPARC-T4
+ * and later ASIs.
+ */
+#define ASI_PHYS_USE_EC 0x14 /* PADDR, E-cachable */
+#define ASI_PHYS_BYPASS_EC_E 0x15 /* PADDR, E-bit */
+#define ASI_BLK_AIUP_4V 0x16 /* (4V) Prim, user, block ld/st */
+#define ASI_BLK_AIUS_4V 0x17 /* (4V) Sec, user, block ld/st */
+#define ASI_PHYS_USE_EC_L 0x1c /* PADDR, E-cachable, little endian*/
+#define ASI_PHYS_BYPASS_EC_E_L 0x1d /* PADDR, E-bit, little endian */
+#define ASI_BLK_AIUP_L_4V 0x1e /* (4V) Prim, user, block, l-endian*/
+#define ASI_BLK_AIUS_L_4V 0x1f /* (4V) Sec, user, block, l-endian */
+#define ASI_SCRATCHPAD 0x20 /* (4V) Scratch Pad Registers */
+#define ASI_MMU 0x21 /* (4V) MMU Context Registers */
+#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23 /* (NG) init-store, twin load,
+ * secondary, user
+ */
+#define ASI_NUCLEUS_QUAD_LDD 0x24 /* Cachable, qword load */
+#define ASI_QUEUE 0x25 /* (4V) Interrupt Queue Registers */
+#define ASI_QUAD_LDD_PHYS_4V 0x26 /* (4V) Physical, qword load */
+#define ASI_NUCLEUS_QUAD_LDD_L 0x2c /* Cachable, qword load, l-endian */
+#define ASI_QUAD_LDD_PHYS_L_4V 0x2e /* (4V) Phys, qword load, l-endian */
+#define ASI_PCACHE_DATA_STATUS 0x30 /* (III) PCache data stat RAM diag */
+#define ASI_PCACHE_DATA 0x31 /* (III) PCache data RAM diag */
+#define ASI_PCACHE_TAG 0x32 /* (III) PCache tag RAM diag */
+#define ASI_PCACHE_SNOOP_TAG 0x33 /* (III) PCache snoop tag RAM diag */
+#define ASI_QUAD_LDD_PHYS 0x34 /* (III+) PADDR, qword load */
+#define ASI_WCACHE_VALID_BITS 0x38 /* (III) WCache Valid Bits diag */
+#define ASI_WCACHE_DATA 0x39 /* (III) WCache data RAM diag */
+#define ASI_WCACHE_TAG 0x3a /* (III) WCache tag RAM diag */
+#define ASI_WCACHE_SNOOP_TAG 0x3b /* (III) WCache snoop tag RAM diag */
+#define ASI_QUAD_LDD_PHYS_L 0x3c /* (III+) PADDR, qw-load, l-endian */
+#define ASI_SRAM_FAST_INIT 0x40 /* (III+) Fast SRAM init */
+#define ASI_CORE_AVAILABLE 0x41 /* (CMT) LP Available */
+#define ASI_CORE_ENABLE_STAT 0x41 /* (CMT) LP Enable Status */
+#define ASI_CORE_ENABLE 0x41 /* (CMT) LP Enable RW */
+#define ASI_XIR_STEERING 0x41 /* (CMT) XIR Steering RW */
+#define ASI_CORE_RUNNING_RW 0x41 /* (CMT) LP Running RW */
+#define ASI_CORE_RUNNING_W1S 0x41 /* (CMT) LP Running Write-One Set */
+#define ASI_CORE_RUNNING_W1C 0x41 /* (CMT) LP Running Write-One Clr */
+#define ASI_CORE_RUNNING_STAT 0x41 /* (CMT) LP Running Status */
+#define ASI_CMT_ERROR_STEERING 0x41 /* (CMT) Error Steering RW */
+#define ASI_DCACHE_INVALIDATE 0x42 /* (III) DCache Invalidate diag */
+#define ASI_DCACHE_UTAG 0x43 /* (III) DCache uTag diag */
+#define ASI_DCACHE_SNOOP_TAG 0x44 /* (III) DCache snoop tag RAM diag */
+#define ASI_LSU_CONTROL 0x45 /* Load-store control unit */
+#define ASI_DCU_CONTROL_REG 0x45 /* (III) DCache Unit Control reg */
+#define ASI_DCACHE_DATA 0x46 /* DCache data-ram diag access */
+#define ASI_DCACHE_TAG 0x47 /* Dcache tag/valid ram diag access*/
+#define ASI_INTR_DISPATCH_STAT 0x48 /* IRQ vector dispatch status */
+#define ASI_INTR_RECEIVE 0x49 /* IRQ vector receive status */
+#define ASI_UPA_CONFIG 0x4a /* UPA config space */
+#define ASI_JBUS_CONFIG 0x4a /* (IIIi) JBUS Config Register */
+#define ASI_SAFARI_CONFIG 0x4a /* (III) Safari Config Register */
+#define ASI_SAFARI_ADDRESS 0x4a /* (III) Safari Address Register */
+#define ASI_ESTATE_ERROR_EN 0x4b /* E-cache error enable space */
+#define ASI_AFSR 0x4c /* Async fault status register */
+#define ASI_AFAR 0x4d /* Async fault address register */
+#define ASI_EC_TAG_DATA 0x4e /* E-cache tag/valid ram diag acc */
+#define ASI_IMMU 0x50 /* Insn-MMU main register space */
+#define ASI_IMMU_TSB_8KB_PTR 0x51 /* Insn-MMU 8KB TSB pointer reg */
+#define ASI_IMMU_TSB_64KB_PTR 0x52 /* Insn-MMU 64KB TSB pointer reg */
+#define ASI_ITLB_DATA_IN 0x54 /* Insn-MMU TLB data in reg */
+#define ASI_ITLB_DATA_ACCESS 0x55 /* Insn-MMU TLB data access reg */
+#define ASI_ITLB_TAG_READ 0x56 /* Insn-MMU TLB tag read reg */
+#define ASI_IMMU_DEMAP 0x57 /* Insn-MMU TLB demap */
+#define ASI_DMMU 0x58 /* Data-MMU main register space */
+#define ASI_DMMU_TSB_8KB_PTR 0x59 /* Data-MMU 8KB TSB pointer reg */
+#define ASI_DMMU_TSB_64KB_PTR 0x5a /* Data-MMU 16KB TSB pointer reg */
+#define ASI_DMMU_TSB_DIRECT_PTR 0x5b /* Data-MMU TSB direct pointer reg */
+#define ASI_DTLB_DATA_IN 0x5c /* Data-MMU TLB data in reg */
+#define ASI_DTLB_DATA_ACCESS 0x5d /* Data-MMU TLB data access reg */
+#define ASI_DTLB_TAG_READ 0x5e /* Data-MMU TLB tag read reg */
+#define ASI_DMMU_DEMAP 0x5f /* Data-MMU TLB demap */
+#define ASI_IIU_INST_TRAP 0x60 /* (III) Instruction Breakpoint */
+#define ASI_INTR_ID 0x63 /* (CMT) Interrupt ID register */
+#define ASI_CORE_ID 0x63 /* (CMT) LP ID register */
+#define ASI_CESR_ID 0x63 /* (CMT) CESR ID register */
+#define ASI_IC_INSTR 0x66 /* Insn cache instrucion ram diag */
+#define ASI_IC_TAG 0x67 /* Insn cache tag/valid ram diag */
+#define ASI_IC_STAG 0x68 /* (III) Insn cache snoop tag ram */
+#define ASI_IC_PRE_DECODE 0x6e /* Insn cache pre-decode ram diag */
+#define ASI_IC_NEXT_FIELD 0x6f /* Insn cache next-field ram diag */
+#define ASI_BRPRED_ARRAY 0x6f /* (III) Branch Prediction RAM diag*/
+#define ASI_BLK_AIUP 0x70 /* Primary, user, block load/store */
+#define ASI_BLK_AIUS 0x71 /* Secondary, user, block ld/st */
+#define ASI_MCU_CTRL_REG 0x72 /* (III) Memory controller regs */
+#define ASI_EC_DATA 0x74 /* (III) E-cache data staging reg */
+#define ASI_EC_CTRL 0x75 /* (III) E-cache control reg */
+#define ASI_EC_W 0x76 /* E-cache diag write access */
+#define ASI_UDB_ERROR_W 0x77 /* External UDB error regs W */
+#define ASI_UDB_CONTROL_W 0x77 /* External UDB control regs W */
+#define ASI_INTR_W 0x77 /* IRQ vector dispatch write */
+#define ASI_INTR_DATAN_W 0x77 /* (III) Out irq vector data reg N */
+#define ASI_INTR_DISPATCH_W 0x77 /* (III) Interrupt vector dispatch */
+#define ASI_BLK_AIUPL 0x78 /* Primary, user, little, blk ld/st*/
+#define ASI_BLK_AIUSL 0x79 /* Secondary, user, little, blk ld/st*/
+#define ASI_EC_R 0x7e /* E-cache diag read access */
+#define ASI_UDBH_ERROR_R 0x7f /* External UDB error regs rd hi */
+#define ASI_UDBL_ERROR_R 0x7f /* External UDB error regs rd low */
+#define ASI_UDBH_CONTROL_R 0x7f /* External UDB control regs rd hi */
+#define ASI_UDBL_CONTROL_R 0x7f /* External UDB control regs rd low*/
+#define ASI_INTR_R 0x7f /* IRQ vector dispatch read */
+#define ASI_INTR_DATAN_R 0x7f /* (III) In irq vector data reg N */
+#define ASI_PIC 0xb0 /* (NG4) PIC registers */
+#define ASI_PST8_P 0xc0 /* Primary, 8 8-bit, partial */
+#define ASI_PST8_S 0xc1 /* Secondary, 8 8-bit, partial */
+#define ASI_PST16_P 0xc2 /* Primary, 4 16-bit, partial */
+#define ASI_PST16_S 0xc3 /* Secondary, 4 16-bit, partial */
+#define ASI_PST32_P 0xc4 /* Primary, 2 32-bit, partial */
+#define ASI_PST32_S 0xc5 /* Secondary, 2 32-bit, partial */
+#define ASI_PST8_PL 0xc8 /* Primary, 8 8-bit, partial, L */
+#define ASI_PST8_SL 0xc9 /* Secondary, 8 8-bit, partial, L */
+#define ASI_PST16_PL 0xca /* Primary, 4 16-bit, partial, L */
+#define ASI_PST16_SL 0xcb /* Secondary, 4 16-bit, partial, L */
+#define ASI_PST32_PL 0xcc /* Primary, 2 32-bit, partial, L */
+#define ASI_PST32_SL 0xcd /* Secondary, 2 32-bit, partial, L */
+#define ASI_FL8_P 0xd0 /* Primary, 1 8-bit, fpu ld/st */
+#define ASI_FL8_S 0xd1 /* Secondary, 1 8-bit, fpu ld/st */
+#define ASI_FL16_P 0xd2 /* Primary, 1 16-bit, fpu ld/st */
+#define ASI_FL16_S 0xd3 /* Secondary, 1 16-bit, fpu ld/st */
+#define ASI_FL8_PL 0xd8 /* Primary, 1 8-bit, fpu ld/st, L */
+#define ASI_FL8_SL 0xd9 /* Secondary, 1 8-bit, fpu ld/st, L*/
+#define ASI_FL16_PL 0xda /* Primary, 1 16-bit, fpu ld/st, L */
+#define ASI_FL16_SL 0xdb /* Secondary, 1 16-bit, fpu ld/st,L*/
+#define ASI_BLK_COMMIT_P 0xe0 /* Primary, blk store commit */
+#define ASI_BLK_COMMIT_S 0xe1 /* Secondary, blk store commit */
+#define ASI_BLK_INIT_QUAD_LDD_P 0xe2 /* (NG) init-store, twin load,
+ * primary, implicit
+ */
+#define ASI_BLK_INIT_QUAD_LDD_S 0xe3 /* (NG) init-store, twin load,
+ * secondary, implicit
+ */
+#define ASI_BLK_P 0xf0 /* Primary, blk ld/st */
+#define ASI_BLK_S 0xf1 /* Secondary, blk ld/st */
+#define ASI_ST_BLKINIT_MRU_P 0xf2 /* (NG4) init-store, twin load,
+ * Most-Recently-Used, primary,
+ * implicit
+ */
+#define ASI_ST_BLKINIT_MRU_S 0xf2 /* (NG4) init-store, twin load,
+ * Most-Recently-Used, secondary,
+ * implicit
+ */
+#define ASI_BLK_PL 0xf8 /* Primary, blk ld/st, little */
+#define ASI_BLK_SL 0xf9 /* Secondary, blk ld/st, little */
+#define ASI_ST_BLKINIT_MRU_PL 0xfa /* (NG4) init-store, twin load,
+ * Most-Recently-Used, primary,
+ * implicit, little-endian
+ */
+#define ASI_ST_BLKINIT_MRU_SL 0xfb /* (NG4) init-store, twin load,
+ * Most-Recently-Used, secondary,
+ * implicit, little-endian
+ */
+
+#endif /* _SPARC_ASI_H */
--
2.7.4
next prev parent reply other threads:[~2016-07-12 19:03 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-12 19:01 [Qemu-devel] [PULL 00/24] target-sparc improvements Richard Henderson
2016-07-12 19:01 ` [Qemu-devel] [PULL 01/24] target-sparc: Mark more flags for helpers Richard Henderson
2016-07-12 19:01 ` [Qemu-devel] [PULL 02/24] target-sparc: Remove softint as a TCG global Richard Henderson
2016-07-12 19:01 ` [Qemu-devel] [PULL 03/24] target-sparc: Store mmu index in TB flags Richard Henderson
2016-07-12 19:01 ` [Qemu-devel] [PULL 04/24] target-sparc: Create gen_exception Richard Henderson
2016-07-12 19:01 ` [Qemu-devel] [PULL 05/24] target-sparc: Unify asi handling between 32 and 64-bit Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 06/24] target-sparc: Store %asi in TB flags Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 07/24] target-sparc: Introduce get_asi Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 08/24] target-sparc: Pass TCGMemOp to gen_ld/st_asi Richard Henderson
2016-07-12 19:02 ` Richard Henderson [this message]
2016-07-12 19:02 ` [Qemu-devel] [PULL 10/24] target-sparc: Add UA2005 defines to asi.h Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 11/24] target-sparc: Use defines from asi.h Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 12/24] target-sparc: Directly implement easy ld/st asis Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 13/24] target-sparc: Use QT0 to return results from ldda Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 14/24] target-sparc: Introduce gen_check_align Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 15/24] target-sparc: Directly implement easy ldd/std asis Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 16/24] target-sparc: Fix obvious error in ASI_M_BFILL Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 17/24] target-sparc: Pass TCGMemOp constants to helper_ld/st_asi Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 18/24] target-sparc: Directly implement easy ldf/stf asis Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 19/24] target-sparc: Directly implement block and short " Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 20/24] target-sparc: Remove helper_ldf_asi, helper_stf_asi Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 21/24] target-sparc: Use explicit writes to cpu_fsr Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 22/24] target-sparc: Use cpu_fsr in stfsr Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 23/24] target-sparc: Use cpu_loop_exit_restore from helper_check_ieee_exceptions Richard Henderson
2016-07-12 19:02 ` [Qemu-devel] [PULL 24/24] target-sparc: Elide duplicate updates to fprs Richard Henderson
2016-07-14 10:48 ` [Qemu-devel] [PULL 00/24] target-sparc improvements Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468350138-9736-10-git-send-email-rth@twiddle.net \
--to=rth@twiddle.net \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).