From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: imammedo@redhat.com, rth@twiddle.net, ehabkost@redhat.com,
jasowang@redhat.com, marcel@redhat.com, mst@redhat.com,
pbonzini@redhat.com, jan.kiszka@web.de, rkrcmar@redhat.com,
alex.williamson@redhat.com, wexu@redhat.com,
davidkiarie4@gmail.com, peterx@redhat.com
Subject: [Qemu-devel] [PATCH v12 22/27] kvm-irqchip: i386: add hook for add/remove virq
Date: Thu, 14 Jul 2016 13:56:31 +0800 [thread overview]
Message-ID: <1468475796-7397-23-git-send-email-peterx@redhat.com> (raw)
In-Reply-To: <1468475796-7397-1-git-send-email-peterx@redhat.com>
Adding two hooks to be notified when adding/removing msi routes. There
are two kinds of MSI routes:
- in kvm_irqchip_add_irq_route(): before assigning IRQFD. Used by
vhost, vfio, etc.
- in kvm_irqchip_send_msi(): when sending direct MSI message, if
direct MSI not allowed, we will first create one MSI route entry
in the kernel, then trigger it.
This patch only hooks the first one (irqfd case). We do not need to
take care for the 2nd one, since it's only used by QEMU userspace
(kvm-apic) and the messages will always do in-time translation when
triggered. While we need to note them down for the 1st one, so that we
can notify the kernel when cache invalidation happens.
Also, we do not hook IOAPIC msi routes (we have explicit notifier for
IOAPIC to keep its cache updated). We only need to care about irqfd
users.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
---
include/sysemu/kvm.h | 6 ++++++
kvm-all.c | 2 ++
target-arm/kvm.c | 11 +++++++++++
target-i386/kvm.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
target-i386/trace-events | 2 ++
target-mips/kvm.c | 11 +++++++++++
target-ppc/kvm.c | 11 +++++++++++
target-s390x/kvm.c | 11 +++++++++++
8 files changed, 102 insertions(+)
diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index e5d90bd..0a16e0e 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -359,6 +359,12 @@ void kvm_arch_init_irq_routing(KVMState *s);
int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
uint64_t address, uint32_t data, PCIDevice *dev);
+/* Notify arch about newly added MSI routes */
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+ int vector, PCIDevice *dev);
+/* Notify arch about released MSI routes */
+int kvm_arch_release_virq_post(int virq);
+
int kvm_arch_msi_data_to_gsi(uint32_t data);
int kvm_set_irq(KVMState *s, int irq, int level);
diff --git a/kvm-all.c b/kvm-all.c
index d94c0e4..69ff658 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -1133,6 +1133,7 @@ void kvm_irqchip_release_virq(KVMState *s, int virq)
}
}
clear_gsi(s, virq);
+ kvm_arch_release_virq_post(virq);
}
static unsigned int kvm_hash_msi(uint32_t data)
@@ -1281,6 +1282,7 @@ int kvm_irqchip_add_msi_route(KVMState *s, int vector, PCIDevice *dev)
}
kvm_add_routing_entry(s, &kroute);
+ kvm_arch_add_msi_route_post(&kroute, vector, dev);
kvm_irqchip_commit_routes(s);
return virq;
diff --git a/target-arm/kvm.c b/target-arm/kvm.c
index 5c2bd7a..dbe393c 100644
--- a/target-arm/kvm.c
+++ b/target-arm/kvm.c
@@ -622,6 +622,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
return 0;
}
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+ int vector, PCIDevice *dev)
+{
+ return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+ return 0;
+}
+
int kvm_arch_msi_data_to_gsi(uint32_t data)
{
return (data - 32) & 0xffff;
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 17cd24b..5d7a7a7 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -3352,6 +3352,54 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
return 0;
}
+typedef struct MSIRouteEntry MSIRouteEntry;
+
+struct MSIRouteEntry {
+ PCIDevice *dev; /* Device pointer */
+ int vector; /* MSI/MSIX vector index */
+ int virq; /* Virtual IRQ index */
+ QLIST_ENTRY(MSIRouteEntry) list;
+};
+
+/* List of used GSI routes */
+static QLIST_HEAD(, MSIRouteEntry) msi_route_list = \
+ QLIST_HEAD_INITIALIZER(msi_route_list);
+
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+ int vector, PCIDevice *dev)
+{
+ MSIRouteEntry *entry;
+
+ if (!dev) {
+ /* These are (possibly) IOAPIC routes only used for split
+ * kernel irqchip mode, while what we are housekeeping are
+ * PCI devices only. */
+ return 0;
+ }
+
+ entry = g_new0(MSIRouteEntry, 1);
+ entry->dev = dev;
+ entry->vector = vector;
+ entry->virq = route->gsi;
+ QLIST_INSERT_HEAD(&msi_route_list, entry, list);
+
+ trace_kvm_x86_add_msi_route(route->gsi);
+ return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+ MSIRouteEntry *entry, *next;
+ QLIST_FOREACH_SAFE(entry, &msi_route_list, list, next) {
+ if (entry->virq == virq) {
+ trace_kvm_x86_remove_msi_route(virq);
+ QLIST_REMOVE(entry, list);
+ break;
+ }
+ }
+ return 0;
+}
+
int kvm_arch_msi_data_to_gsi(uint32_t data)
{
abort();
diff --git a/target-i386/trace-events b/target-i386/trace-events
index 2113075..818058c 100644
--- a/target-i386/trace-events
+++ b/target-i386/trace-events
@@ -2,3 +2,5 @@
# target-i386/kvm.c
kvm_x86_fixup_msi_error(uint32_t gsi) "VT-d failed to remap interrupt for GSI %" PRIu32
+kvm_x86_add_msi_route(int virq) "Adding route entry for virq %d"
+kvm_x86_remove_msi_route(int virq) "Removing route entry for virq %d"
diff --git a/target-mips/kvm.c b/target-mips/kvm.c
index f3f832d..dcf5fbb 100644
--- a/target-mips/kvm.c
+++ b/target-mips/kvm.c
@@ -1043,6 +1043,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
return 0;
}
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+ int vector, PCIDevice *dev)
+{
+ return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+ return 0;
+}
+
int kvm_arch_msi_data_to_gsi(uint32_t data)
{
abort();
diff --git a/target-ppc/kvm.c b/target-ppc/kvm.c
index 884d564..c2acb0a 100644
--- a/target-ppc/kvm.c
+++ b/target-ppc/kvm.c
@@ -2617,6 +2617,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
return 0;
}
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+ int vector, PCIDevice *dev)
+{
+ return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+ return 0;
+}
+
int kvm_arch_msi_data_to_gsi(uint32_t data)
{
return data & 0xffff;
diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c
index 45e94ca..08aaf61 100644
--- a/target-s390x/kvm.c
+++ b/target-s390x/kvm.c
@@ -2267,6 +2267,17 @@ int kvm_arch_fixup_msi_route(struct kvm_irq_routing_entry *route,
return 0;
}
+int kvm_arch_add_msi_route_post(struct kvm_irq_routing_entry *route,
+ int vector, PCIDevice *dev)
+{
+ return 0;
+}
+
+int kvm_arch_release_virq_post(int virq)
+{
+ return 0;
+}
+
int kvm_arch_msi_data_to_gsi(uint32_t data)
{
abort();
--
2.4.11
next prev parent reply other threads:[~2016-07-14 5:58 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-14 5:56 [Qemu-devel] [PATCH v12 00/27] IOMMU: Enable interrupt remapping for Intel IOMMU Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 01/27] x86-iommu: introduce parent class Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 02/27] intel_iommu: rename VTD_PCI_DEVFN_MAX to x86-iommu Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 03/27] x86-iommu: provide x86_iommu_get_default Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 04/27] x86-iommu: introduce "intremap" property Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 05/27] acpi: enable INTR for DMAR report structure Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 06/27] intel_iommu: allow queued invalidation for IR Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 07/27] intel_iommu: set IR bit for ECAP register Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 08/27] acpi: add DMAR scope definition for root IOAPIC Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 09/27] intel_iommu: define interrupt remap table addr register Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 10/27] intel_iommu: handle interrupt remap enable Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 11/27] intel_iommu: define several structs for IOMMU IR Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 12/27] intel_iommu: add IR translation faults defines Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 13/27] intel_iommu: Add support for PCI MSI remap Peter Xu
2016-07-21 17:45 ` Michael S. Tsirkin
2016-07-22 3:17 ` Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 14/27] q35: ioapic: add support for emulated IOAPIC IR Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 15/27] ioapic: introduce ioapic_entry_parse() helper Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 16/27] intel_iommu: add support for split irqchip Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 17/27] x86-iommu: introduce IEC notifiers Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 18/27] ioapic: register IOMMU IEC notifier for ioapic Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 19/27] intel_iommu: Add support for Extended Interrupt Mode Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 20/27] intel_iommu: add SID validation for IR Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 21/27] kvm-irqchip: simplify kvm_irqchip_add_msi_route Peter Xu
2016-07-14 5:56 ` Peter Xu [this message]
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 23/27] kvm-irqchip: x86: add msi route notify fn Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 24/27] kvm-irqchip: do explicit commit when update irq Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 25/27] intel_iommu: support all masks in interrupt entry cache invalidation Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 26/27] kvm-all: add trace events for kvm irqchip ops Peter Xu
2016-07-14 5:56 ` [Qemu-devel] [PATCH v12 27/27] intel_iommu: disallow kernel-irqchip=on with IR Peter Xu
2016-09-22 8:29 ` [Qemu-devel] [PATCH v12 00/27] IOMMU: Enable interrupt remapping for Intel IOMMU Igor Mammedov
2016-09-22 9:08 ` Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468475796-7397-23-git-send-email-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=davidkiarie4@gmail.com \
--cc=ehabkost@redhat.com \
--cc=imammedo@redhat.com \
--cc=jan.kiszka@web.de \
--cc=jasowang@redhat.com \
--cc=marcel@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rkrcmar@redhat.com \
--cc=rth@twiddle.net \
--cc=wexu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).