qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Eric Blake <eblake@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL v2 09/25] block: Switch BlockRequest to byte-based
Date: Wed, 20 Jul 2016 17:21:06 +0100	[thread overview]
Message-ID: <1469031682-21863-10-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1469031682-21863-1-git-send-email-stefanha@redhat.com>

From: Eric Blake <eblake@redhat.com>

BlockRequest is the internal struct used by bdrv_aio_*.  At the
moment, all such calls were sector-based, but we will eventually
convert to byte-based; start by changing the internal variables
to be byte-based.  No change to behavior, although the read and
write code can now go byte-based through more of the stack.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1468624988-423-4-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 block/io.c | 62 ++++++++++++++++++++++++++++++--------------------------------
 1 file changed, 30 insertions(+), 32 deletions(-)

diff --git a/block/io.c b/block/io.c
index 8d41305..85953bb 100644
--- a/block/io.c
+++ b/block/io.c
@@ -33,14 +33,13 @@
 
 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
 
-static BlockAIOCB *bdrv_co_aio_rw_vector(BdrvChild *child,
-                                         int64_t sector_num,
-                                         QEMUIOVector *qiov,
-                                         int nb_sectors,
-                                         BdrvRequestFlags flags,
-                                         BlockCompletionFunc *cb,
-                                         void *opaque,
-                                         bool is_write);
+static BlockAIOCB *bdrv_co_aio_prw_vector(BdrvChild *child,
+                                          int64_t offset,
+                                          QEMUIOVector *qiov,
+                                          BdrvRequestFlags flags,
+                                          BlockCompletionFunc *cb,
+                                          void *opaque,
+                                          bool is_write);
 static void coroutine_fn bdrv_co_do_rw(void *opaque);
 static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs,
     int64_t offset, int count, BdrvRequestFlags flags);
@@ -2015,8 +2014,9 @@ BlockAIOCB *bdrv_aio_readv(BdrvChild *child, int64_t sector_num,
 {
     trace_bdrv_aio_readv(child->bs, sector_num, nb_sectors, opaque);
 
-    return bdrv_co_aio_rw_vector(child, sector_num, qiov, nb_sectors, 0,
-                                 cb, opaque, false);
+    assert(nb_sectors << BDRV_SECTOR_BITS == qiov->size);
+    return bdrv_co_aio_prw_vector(child, sector_num << BDRV_SECTOR_BITS, qiov,
+                                  0, cb, opaque, false);
 }
 
 BlockAIOCB *bdrv_aio_writev(BdrvChild *child, int64_t sector_num,
@@ -2025,8 +2025,9 @@ BlockAIOCB *bdrv_aio_writev(BdrvChild *child, int64_t sector_num,
 {
     trace_bdrv_aio_writev(child->bs, sector_num, nb_sectors, opaque);
 
-    return bdrv_co_aio_rw_vector(child, sector_num, qiov, nb_sectors, 0,
-                                 cb, opaque, true);
+    assert(nb_sectors << BDRV_SECTOR_BITS == qiov->size);
+    return bdrv_co_aio_prw_vector(child, sector_num << BDRV_SECTOR_BITS, qiov,
+                                  0, cb, opaque, true);
 }
 
 void bdrv_aio_cancel(BlockAIOCB *acb)
@@ -2062,8 +2063,8 @@ typedef struct BlockRequest {
     union {
         /* Used during read, write, trim */
         struct {
-            int64_t sector;
-            int nb_sectors;
+            int64_t offset;
+            int bytes;
             int flags;
             QEMUIOVector *qiov;
         };
@@ -2127,24 +2128,23 @@ static void coroutine_fn bdrv_co_do_rw(void *opaque)
     BlockAIOCBCoroutine *acb = opaque;
 
     if (!acb->is_write) {
-        acb->req.error = bdrv_co_do_readv(acb->child, acb->req.sector,
-            acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
+        acb->req.error = bdrv_co_preadv(acb->child, acb->req.offset,
+            acb->req.qiov->size, acb->req.qiov, acb->req.flags);
     } else {
-        acb->req.error = bdrv_co_do_writev(acb->child, acb->req.sector,
-            acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
+        acb->req.error = bdrv_co_pwritev(acb->child, acb->req.offset,
+            acb->req.qiov->size, acb->req.qiov, acb->req.flags);
     }
 
     bdrv_co_complete(acb);
 }
 
-static BlockAIOCB *bdrv_co_aio_rw_vector(BdrvChild *child,
-                                         int64_t sector_num,
-                                         QEMUIOVector *qiov,
-                                         int nb_sectors,
-                                         BdrvRequestFlags flags,
-                                         BlockCompletionFunc *cb,
-                                         void *opaque,
-                                         bool is_write)
+static BlockAIOCB *bdrv_co_aio_prw_vector(BdrvChild *child,
+                                          int64_t offset,
+                                          QEMUIOVector *qiov,
+                                          BdrvRequestFlags flags,
+                                          BlockCompletionFunc *cb,
+                                          void *opaque,
+                                          bool is_write)
 {
     Coroutine *co;
     BlockAIOCBCoroutine *acb;
@@ -2153,8 +2153,7 @@ static BlockAIOCB *bdrv_co_aio_rw_vector(BdrvChild *child,
     acb->child = child;
     acb->need_bh = true;
     acb->req.error = -EINPROGRESS;
-    acb->req.sector = sector_num;
-    acb->req.nb_sectors = nb_sectors;
+    acb->req.offset = offset;
     acb->req.qiov = qiov;
     acb->req.flags = flags;
     acb->is_write = is_write;
@@ -2199,8 +2198,7 @@ static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
     BlockAIOCBCoroutine *acb = opaque;
     BlockDriverState *bs = acb->common.bs;
 
-    acb->req.error = bdrv_co_pdiscard(bs, acb->req.sector << BDRV_SECTOR_BITS,
-                                      acb->req.nb_sectors << BDRV_SECTOR_BITS);
+    acb->req.error = bdrv_co_pdiscard(bs, acb->req.offset, acb->req.bytes);
     bdrv_co_complete(acb);
 }
 
@@ -2216,8 +2214,8 @@ BlockAIOCB *bdrv_aio_discard(BlockDriverState *bs,
     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
     acb->need_bh = true;
     acb->req.error = -EINPROGRESS;
-    acb->req.sector = sector_num;
-    acb->req.nb_sectors = nb_sectors;
+    acb->req.offset = sector_num << BDRV_SECTOR_BITS;
+    acb->req.bytes = nb_sectors << BDRV_SECTOR_BITS;
     co = qemu_coroutine_create(bdrv_aio_discard_co_entry, acb);
     qemu_coroutine_enter(co);
 
-- 
2.7.4

  parent reply	other threads:[~2016-07-20 16:21 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-20 16:20 [Qemu-devel] [PULL v2 00/25] Block patches Stefan Hajnoczi
2016-07-20 16:20 ` [Qemu-devel] [PULL v2 01/25] block: Fragment reads to max transfer length Stefan Hajnoczi
2016-07-20 16:20 ` [Qemu-devel] [PULL v2 02/25] raw_bsd: Don't advertise flags not supported by protocol layer Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 03/25] block: Fragment writes to max transfer length Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 04/25] nbd: Rely on block layer to break up large requests Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 05/25] nbd: Drop unused offset parameter Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 06/25] iscsi: Rely on block layer to break up large requests Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 07/25] block: Convert bdrv_co_discard() to byte-based Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 08/25] block: Convert bdrv_discard() " Stefan Hajnoczi
2016-07-20 16:21 ` Stefan Hajnoczi [this message]
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 10/25] block: Convert bdrv_aio_discard() " Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 11/25] block: Convert BB interface to byte-based discards Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 12/25] raw-posix: Switch paio_submit() to byte-based Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 13/25] rbd: Switch rbd_start_aio() " Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 14/25] block: Convert .bdrv_aio_discard() " Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 15/25] block: Add .bdrv_co_pdiscard() driver callback Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 16/25] blkreplay: Switch .bdrv_co_discard() to byte-based Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 17/25] gluster: " Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 18/25] iscsi: " Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 19/25] nbd: " Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 20/25] qcow2: " Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 21/25] raw_bsd: " Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 22/25] sheepdog: " Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 23/25] block: Kill .bdrv_co_discard() Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 24/25] nbd: Convert to byte-based interface Stefan Hajnoczi
2016-07-20 16:21 ` [Qemu-devel] [PULL v2 25/25] raw_bsd: " Stefan Hajnoczi
2016-07-20 21:03 ` [Qemu-devel] [PULL v2 00/25] Block patches Peter Maydell
2016-07-21  9:58   ` Stefan Hajnoczi
2016-07-21 10:47     ` Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469031682-21863-10-git-send-email-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=eblake@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).